15
[CHINESE] Bad refresh of variables having a chinese name
Description If the operating system was configured for the language Simplified Chinese, the spy list does not display the values of variables with Chinese characters in names. The issue has been addressed and now the refresh of the Chinese variable ...
workbench 15.0 multi-task - unexpected "Start" box open
Description In the zenon Logic Studio, in the multitask project, the “Start mode” dialog was opened, if the “Online” button in the main toolbar was clicked when the project was already running. The issue has been addressed and the behavior is now as ...
ETM: Cursor output window only shows data until "now", not from curves that are in the future.
Description If a time filter in the ETM is set in the future, the cursor output window only displayed data until "now", but not from curves that are in the future. The issue has been addressed and now the correct values are displayed in the cursor ...
In WVS the DIntMan-faceplate has dropdowns instead of number fields
Description In the Web Visualization Service the DIntMan-Faceplate had dropdowns instead of field numbers. The issue has been addressed and the Faceplate now has field numbers. To benefit from this fix: Update your zenon Software Platform to the ...
IEC61850 client - TimeQuality not retrieved by the Client using the status bits #21 (_VSB_RT_E), #22 (_VSB_RT_I) and #49 (_VSB_TINVAL_BIT) and #53 (not defined - T_UNSYNC)
Description The zenon Logic IEC61850 Client fieldbus driver does not evaluate TimeQuality as status bits of variables. And the documentation of the driver describes the wrong bits (the same bits list as zenon IEC850 driver, and not these originally ...
Source control: after first connection, it should not be allowed to change project URL
Description Source control: If a zenon Logic project was linked to a SVN or GIT repository for the first time and has been reopened again, it was afterwards possible to change the repository URL and the project name in the repository. The issue has ...
"N" and "P" contacts sometimes do not work
Description In the Main program in the simulation mode the “N” and the “P” contacts in LD language did not work sometimes. The coils were never reset. The issue has been addressed and the “N” and the “P” contacts behavior is now as expected. To ...
Issue with Document Description Field in Print Template - Indexing Page
Description When using the Microsoft print function “Print as PDF,” the index page in the PDF document retained the name of a specific program instead of the name of the index heading. The issue has been addressed and the print behavior is now as ...
WvsOpsManagerController: Fix race condition in SE pre-launch logic
Description A race-condition in the code of the WVS Ops Manager Controller has been discovered that could lead to an incorrect number of pre-launched Service Engine instances. The issue has been addressed and the behavior is now as expected. To ...
Service Engine and Smart Client crash if an Active Directory user uses a password with more than 20 characters
Description The Service Engine and Smart Client were closed unexpectedly if an Active Directory user used a password with more than 20 characters. The issue has been addressed and Service Engine and Smart Client are no longer closed, if a password ...
RGM: Closing RGM and then performing eSignature change causes crash
Description In the Recipe Group Manager, it was possible to perform an eSignature value change after the RGM has been closed. This led to an unexpected closure of the Service Engine. The issue has been addressed and the eSignature value change can no ...
Multiple identical ROT entries for zenrt32.exe (VWS Clients & SE) cause undefined behavior
Description Every running zenrt32.exe of the Web Visualization Service Clients registered itself in the Running Object Table (ROT). This led to multiple identical entries for the APPID of the zenon Service Engine. This inconsistency made it ...
Addin - DeveloperTools: package-file can not be created (error: LiteralContent) when "DevExpress.Xpf.Core.v24.1.dll" is referenced
Description The Addin – Developer Tools package-file could not be created when "DevExpress.Xpf.Core.v24.1.dll" was referenced. The error "LiteralContent" occurred. The issue has been addressed and now the file creation behavior is as expected. To ...
SVG preview in Engineering Studio does not work when using SVG elements from the Global Project
Description SVG files that were stored in the global project and used in projects were not correctly previewed in the Engineering Studio. In the Service Engine the SVG Elements were displayed correctly. The issue has been addressed and the SVG ...
Mainthread sometimes is blocked for several seconds if LFC is enabled in huge projects
Description In projects with large ALC models, each time the Load Flow Calculation (LFC) had to be recalculated (i.e., when a source variable changes its value), the Service Engine main thread could get blocked for some seconds. The issue has been ...
T5BEV : unbuffered variable are buffered
Description If Buffered Event Server communication has been used, the unbuffered variables were also buffered. The issue has been addressed and the buffering behavior now is as expected. To benefit from this fix: Update your zenon Software Platform ...
WVS: Symbols are displayed differently between zenon 14 and 15
Description In the Web Visualization Service the symbols were displayed differently between zenon version 14 and zenon version 15. The issue has been addressed and now the display of the symbols is independent from the zenon version. To benefit from ...
ProfiNet IO RT Controller: Configure slots with Turck GSDML file not possible. Error: "Unsupported: This module contains Parameter data with unsupported data types."
Description The PROFINET IO RT Controller did not support the slots configuration with Turck GSDML file. The issue has been addressed and the slot configuration behavior now works as expected. To benefit from this fix: Update your zenon Software ...
K5B: document the PRJTOUTF8 call in help
Description In zenon Logic the PRJTOUTF8 call was missing in the help and has been added. The issue has been addressed and K5B PRJTOUTF8 <ProjectPath> call has been converted to UTF8. To benefit from this fix: Update your zenon Software Platform to ...
STRATONRT: established broken TCP connections are not closed correctly causing a denial of service when the maximum number of 16 connections is reached
Description The zenon Logic Service on Linux did not accept new TCP connections to the main port for a period of two hours as broken TCP connections were not correctly recognized under specific circumstances and were kept in a half closed state and ...
T5BEVServer: not initialized memory causing random values to be stored
Description The Logic Service communicating changes via the buffered event server sent incorrectly formatted events under specific circumstances following a reconnect of the stratonNG driver. This issue has been addressed and in addition the Logic ...
IEC870_103 driver does not set value, status and timestamp when there is no connection after Service Engine start
Description The IEC870_103 driver did not set the value, status or timestamp when no connection was established after the Service Engine started. The issue has been addressed and the IEC870_103 driver behavior is now as expected. To benefit from this ...
T5BEV : IOT2050 lost on localhost connection after Buffered connection is lost
The IOT2050 Device with Siemens Industrial OS lost on localhost Unbuffered connection after remote Buffered connection was lost. The issue has been addressed and the behavior is now as expected. To benefit from this fix: Update your zenon Software ...
Beckhoff NG driver: Import does not work correctly in Version 11
Description The BeckhNG driver variable import did not work correctly. The import dialog did not display all variables available in the *.TPY file. The issue has been addressed and the variable import behavior now works as expected. To benefit from ...
Duplicate equipment group links break metadata synchronization to Asset Modeling
Description When an equipment group was linked more than once to a variable, archive, ... this resulted in the error message "the object to add is already used in this association" in metadata synchronization to Asset Modeling. The issue has been ...
stratonNG driver loses status information of variables which are not BEV Buffering active after Server and IoT (Logic Server) network breakdown
Description The stratonNG driver lost the status information of variables which were not BEV buffered after a network breakdown between the Server and the IoT (Logic Server). The issue has been addressed and the status information is now transmitted ...
CDProtDrv: zenon Logic Studio cannot access CDProtDrv (Can not connect CDProtDrv driver!) in Engineering Studio x64
Description In zenon Engineering Studio x64 the zenon Logic Studio could not connect to CDProtDrv driver. The issue has been addressed and the connection now works as expected. To benefit from this fix: Update your zenon Software Platform to the ...
Deadlock cancelling remote transport in network topology view
Description When a large project was transferred via Remote transport using the network topology, and the Cancel button was clicked in the progress bar during this process, a deadlock could occur. The issue has been addressed and the project transfer ...
Active Directory: Not possible to change user password when password expires
Description The user password in the Active Directory could not be changed after expiration. The issue has been addressed and the password can be changed now after expiration. To benefit from this fix: Update your zenon Software Platform to the ...
T5BEV: data loss of buffered events with T5MRT.exe with -evlatency=10 and T5BevClient.exe
Description The stratonNG driver lost connection with smaller evlatency as a default to Logic Service. The issue has been addressed and the behavior is now as expected. To benefit from this fix: Update your zenon Software Platform to the latest build ...
T5BEV: data loss of ~ 20 seconds after ethernet connection is lost and re-established
Description The stratonNG driver using the "Buffered Event Server" lost buffered data by detection connection was lost. The issue has been addressed and the behavior is now as expected. To benefit from this fix: Update your zenon Software Platform to ...
Bad copy with drag&drop of a POU having action blocks
Description When action blocks were copied from the main FBD program to another program using drag&drop, the action blocks were not copied correctly. The issue has been addressed and the copying behavior now works as expected. To benefit from this ...
FBD - Print a program using Print Setup other than "Default" leads to unexpected variable "TAG" and "Description" display results
Description Printing an FBD program with a print setting other than Default resulted in unexpected display results for the TAG and Description variables. The issue has been addressed and the printing behavior is now as expected. To benefit from this ...
Equipment model linking for variables is inconsitent due to duplicate key entries - even on new Metadatabases
Description The Equipment Models/Groups from the global project were not consistently linked to variables. Variables and Equipment groups were both present in the metadatabase. The issue has been addressed and the linking behavior is now as expected. ...
Trend Graphic Corruption When Using Cursor with Multiple Archive Variables(4+) and Zoom Out
Description If a zoom out function has been executed in a Trend Graphic Screen with activated cursor and four or more archive variables added the Trend display was graphically corrupted. The issue has been addressed and the zoom behavior is now as ...
Keycombination Does Not Work on Login Screen When Opened via Keycombination and Authorized Function
Description The key combination did not work on a Login Screen if the screen was opened via a key combination and an authorized function. The issue has been addressed and now the key combination works on the Login Screen regardless of how it was ...
Unreachable SQL evacuation server-> SE hang, opening Report Viewer lot selection
Description Due to an unreachable SQL evacuation server, the Service Engine became blocked whenever the Report Viewer’s lot selection was opened in wildcard view. This blockage occurred because the serial list of archives timeouts had to expire. This ...
Bug: Write Error to setVal[SP] on IEC 61850 Server
Description The IEC 61850 Server fieldbus driver accepts the write requests for read-only ('RO') data attributes (variables) with FC=SP; e.g. */setVal[SP]. And it refuses the write requests for data attributes with FC=CF, if SCL-configured as 'Set' ...
Performing eSignature for SetValue ends with a crash
Description When eSignature was executed for a SetValue operation and the last button was clicked, the ESignature screen was successfully closed. However, the execution of the SetValue operation was terminated by an unexpected closure of the Service ...
WVS: SysDrv variables for Set value input not working
Description In the Web Visualization Service opening a keyboard screen for set value input from a dynamic element and using the following system driver variables produced empty results: [Project summary] Variable for set value input [Project summary] ...
Next page