Kommentarspalte - Funktionen
Hallo, ich hätte einen Vorschlag für Funktionen im Editor. „hnlich als die Spalten Name, Typ, Parameter etc. wäre wegen Beschreibungsmöglichkeit eine neue Kommentarspalte sehr nützlich - wie bei der Symbolbibliothek. Dadurch kann man 'beschreibungslosen'
Profibus DP on WinCE
Hi, I have Siemens PLC S7-400, SIMATIC MP377 touch panel( WinCE, ARMv4) and Profibus DP communication protocol between them. What driver I should use? In ProfibusDP directory (drivers list), I can not see any suitable driver. Regards. This is a migrated
Runtime Error
Hello Everybody. I am getting an error in runtime attached in snapshot after getting this error zenon runtime application is closed. please give me the solution. . This is a migrated post! Originally posted on 21.11.2013 by user sidramsatyal. Please be
RTU(PLC) Communication status
Hello Everybody I have one rtu(PLC) connected to network on LAN. I am getting the values from that rtu(PLC) on scada. I am getting if rtu(PLC) not communicating with scada with the red square box on variable. But i want an alarm when communication between
Schedule
Hi I need to do a schedule weekly or montly, But the options are not enabled. This is a migrated post! Originally posted on 20.11.2013 by user m.y. Please be aware that information can be outdated.
Login problems
Hi there, In the factory that I am working at some point users can not login with any user (Invalid user identification!). We are using Zenon 6.51 SP0 build 1 and standalone machines. The solution is to rebuild the runtime and apply the changes to it.
Size dynamic for ActiveX and Control Elements
Hello, support team. I use version 7.10 I cannot get any result with size dynamic options for ActiveX and Control Elements (CEL list). In same time I easily set size with same size variables for simple elements. Is it possible at all to set, for example,
verschachtelter Strukturdatentyp
Guten Morgen Ich muss leider nochmals mit einem Problem anrücken, hoffe dass mir dieses Mal jemand weiterhelfen kann.. um meine vielen Variablen beieinander zu haben und besser zu organisieren, möchte ich eine verschachtelte Strukturvariable benutzen.
Filter option in Report viewer
Hi everybody. i have multiple variables in report. i want to filter variables with their name/identification. how to do so.please check attachment. This is a migrated post! Originally posted on 15.11.2013 by user jahidbagwan. Please be aware that information
historian configuration
Hi Mark, Thank you for your ideas for my last question, they really helped me :) Now I have another problem :) I need to make a day report with the sum of some values from the process. I have a basic archive where the values are stored each day and I
Report Generator, Reading of Parameters from Cells for SQL-Query
Hallo Marc, I have another problem, which regarding to other forums is not unknown. It refers to the possibility of giving the values for parameters from the customer's input within the cells of report generator. The report generators seems to have the
Popup unter Windows CE unsichtbar?
Hallo alle zusammen, ich komm mal ohne längere Umschweife zu meinen Problem: Ich hab ein Windows CE Panel (Siemens MP 377 19") mit Windows CE 5.0 (ARM Prozessor) Zenon 7.00 SP0 Build 7. In meiner Runtime rufe ich verschiedene Popups auf, diese werden
confirm window for analog
hi all, using a zenon 7.10 5560. I 'd like to make a confirm winodw when writing a set value. now, under properties of numberic value > write set value > write set value via : element. so, on the Runtime, when changing a set value, after click the numberic
multi monitor configuration lost if monitors switched off
We are using multi monitor configuration with 2 monitors 1920x1080 resolution each. The zenon6.ini parameters are set RT_CXMAINFRAME=3839, RT_CYMAINFRAME 1079. On each monitor are shown several frames with buttons, alarm head and plant pictures. After
Clock display
Hi Mark, Than you for your answer. I have already solved this problem with the sqldao with "%d" and now I can see the values as I want. I have now another different problem: I want to set a date value in runtime. I have a tag that is "Time_charge" and
Trend Profile exportieren
Hallo! Ich müsste ein zenon 6.20 SP4 Projekt auf zenon 7.10 updaten. Dazu möchte ich von den Clients die Trend Profile sichern um diese dann später wieder, auf den neuen Clients, nutzen zu können. Ist es überhaupt möglich diese Profile zu sichern? (Wo
max volume size reached messages in CEL
Hello, support team. In one of our projects there are a lot of max volume size [100MB] reached messages which are added every minute. Variable name column is empty so question is what can be generator of such messages? Screenshot of CEL see in attachement.
CEL file date within Zenon
Hello, In the CE version, is it possible to display the time/date of the CEL file within Zenon? Or is there another way of seeing when the last CEL event log file was saved to the Compact Flash card? Regards Matt This is a migrated post! Originally posted
Printing offline CEL/Alarm List
Hi I can not find in the manual (Chronologic event list.pdf) how do I add alarm area and alarm/event group to print. Tell me what key words for the list part can I use for alarm area and alarm/event group This is a migrated post! Originally posted on
Dynamic Alarm delay
Hi ! I raise this thread because I have the same problem : I want to link the delay time to a variable (intern and remanent), just as it is made for limit values. I have already tried to set dynproperty "DelayTime" but it doesn't work the way we need
Zusammengesetzte Namen mit Combi-Element (Hierarchical names)
Guten Tag! Statt der mir bisher bekannten Variante der Verknüpfungsregel, habe ich nun begonnen die Variante mit den "zusammengesetzten Namen" zu gebrauchen. Ich habe eine Strukturvariable aus dem Datentyp Motor_MVS und den jeweiligen Elementen Motor_MVS.STA,
Change the text on a button in the runtime
Hi everybody, s there no way to change the "Text1" from a button? (during the runtime runs) I have a button which triggers a macro. when i press the button the first time, i want to edit the Text1 (start Event -> stop Event) when i press the button the
Dialogfenster Position auf 2 Monitor
Hallo, wir haben 2 Monitor Arbeitsplätze wo das Trend- und AML-Filter Dialogfenster immer in der Mitte erscheint. Sehr ungünstig. (Photo in der Anlage) Wie kann man dieses Fenster auf den linken oder auf den rechten Monitor aufrufen? Danke für die Untertützung,
text message and other
i' m very new with Zenon so i have these issue: where i write the text of the message ?(prompted when one bit in plc will go to one). 2) I put a 0/1 switch in a screen with an associated variable (bit); if i write this bit from plc program i see in runtime
PFS: Nachtschicht 23:00:00 - 05:45:00 nicht möglich?
Hallo! Ich fange gerade an mich mit dem PFS näher zu beschäftigen. Momentan versuche ich das Schichtmodell der Kunden abzubilden. Einfache Aufgabe: Nachtschicht: 23:00:00 - 05:45:00 Dazu habe ich ein Zeitmodell angelegt, dort eine neue Schicht (die momentan
Time control function - interval
Hi copadata, I have one archive and I want to start archiving variables in this arhive every day at 08.00AM and to stop archiveing at 11.00AM, I have made function "Archive:start" and "archive:stop" and connect thiese functions to time control function
Mistake with the store of the global variables. There is no parameter file!
Hi there, After changing the name of the project an error appears when the runtime is started. "Mistake with the store of the global variables. There is no parameter file!" I also copied the runtime information form the old project inside the data folder
Multiplex tag
Hi, I have a problem with displaying the numerical values of tags whose current value depend of others tags values (equivalent to MULTIPLEX TAG in Wincc Flex). f.e. In Wincc Flex I have numerical value which is multiplex tag (internal tag--Float_f.e.
Problem with zenonRCE.exe
i have a project using zenon 6.51 hmi scada softwear . the project using the advanced TPH-1250 hmi touchpanel with wince 6.0 when i transport wince runtime file to the touchpanel and run the zenonRCE.exe problem, it appears an error dialog box as below
Remanence of the internal variables
Hi It is necessary to set initial value of the internal variable and later let the operator change and keep its changes. I see the manual Variable -> Internal variable -> Remanence. Off: When starting Runtime, the alternate value of the variable or an
Automatische Variablennamen Anhänge
Hallo zusammen, ich verdwende Zenon und eine Beckhoff Steuerung (Twincat3). Jedesmal wenn ich vom Trieber Variablen importiere, erzeugt Zenon einen automatischen "Variablennamen Anhang". Eine importierte Variable mit dem Namen z.B,: GV.Motor_1.Lüftung_ein
Alarm/event classes, areas, groups filter sort order
Hi to all I've created CEL filter screen. I've put on it predefined control elements for alarm/event classes, areas, groups filtering. But its sorting order is so strange. Items of listboxes are sorted by string number code - i.e. 1,10,11,...,19,100,101,102,...,199,2,20,21,22,...
Alarm Timestamp
Hi, I want to know what is the source for the time stamp is displayed in the alarm message list for the "time received" column. Is it the system time? TIA This is a migrated post! Originally posted on 15.10.2013 by user kavya. Please be aware that information
convert 2 integer into 1 float
hiiii.... I get data in 2 integer registers.. Idon't have float register in my device.. but i want this in a single float register.. can we achieve this?.. Please help.. This is a migrated post! Originally posted on 15.10.2013 by user jahidbagwan. Please
Max.Storage time of Alarm Message list & Chronologic event list
Dear All, What is the maximum storage time of the Alarm Message list & Chronologic event list...? Because I removed the Delete button in the Alarm message list and Chronologic event list screen for customer wish. Customer would like to know maximum storage
Write a complete name of the user to string variable
Dear All, I am having five users including Admin. Admin user only has a authorization for user control. But other users also like to see the complete name of all the users. So I like to make a small pop-up like user detail. In this screen user detail
Zoomstufe in Editor default 100%->75%
Hallo. Default ist dieser Parameter auf 100% eingestellt. Kann ich irgendwo (zenon6.ini, etc.) diesen Parameter auf z.B. 75% einstellen ? Ich möchte mehrere Bilder aufeinmal öffnen und diesen Parameter automatisch auf 75% eingestellt haben. Sonnst muss
Grenzwerttexte
Hallo Zusammen, bei unserem Zenon Projekt verwenden wir die Alarmmeldeliste:cool:. In der Liste werden zwei Variablen in einem Alarmfall über Grenzwerttexte angezeigt. In den Projekteigenschaften ist bereits die Option: “Lange dynamische Grenzwerttexte
Monitorprofil zur Laufzeit ändern
Hallo. Ist es möglich das Monitorprofil während der Laufzeit zu ändern (z.B. über ein Script beim Bildwechsel) ? Hintergrund: Wir nutzen derzeit 4-fach Grafikkarten mit entsprechenden Monitoren. D.h. pro Monitor wird ein Bild dargestellt. Nun haben wir
Comm.Failure and related animation
Dear All, When the communication failure is happen, I am getting the small red rectangle at right side corner of the Numerical value display. At the same time, Is it possible to make any one of the internal Boolean variable to "True"...? Best Regards,
Next Page