Recent Topics
Auto export of CEL mix up events in export files...
Hello all I want to export a CEL every day at midnight containing the events of the day in a file where the name states the date. I have a Zenon 6 6.51, where i have defined a Timecontrol "cyclic from that day" at 23:59:00, it calls a build in function
How to create dynamical elements in VSTA
Hi, I am using a demo version of Zenon 7.1 Supervisor. In an application we need a dynamic number (depending on varying setups) of controls such as buttons, static text elements and textboxes. I tried running some code like this, adapting to samples in
zenOn performance metrics
Hello, support team. Question 1. I need to dublicate value of one variable into second variable. I my project there is a lot of such variable pairs. What is the fastest way - to use Math variable with X01 formula or to use Allocations (or may be there
Setting for Restoring PLC Value.
Dear All, I need your expert help on following customer requirement. Customer want to see updated analog values and reports on run time , not a previous restored values when there is some system problem. Could you please help me on following Zenon setting.
2 monitor
Hi, if I have 2 monitor (1920x1200 each), in GRAPHICAL DESIGN/MONITOR ADMINISTRATION/Monitor resolution, 1920x1200 should be written or 3840x1200? Thanks. Regards. This is a migrated post! Originally posted on 09.09.2013 by user tihomir. Please be aware
RTFunktion Erweiterter Trend
Hallo, Ich hätte eine VBA Frage zu einem anderen Thread, (http://www.copadata.com/forums/showthread.php?t=972) der nicht zur Kathegorie VBA gehört. Daher dachte ich mir, ich stelle die Frage auch hier, da ich mir nicht sicher war, ob sie zu dem Thread
Editor license issue
Dear support i am facing problem that when i open zenon editor, error appeared and its hang editor window. i have zenon6.51 dongle with editor and run time license.attached error snapshot help you to find solution. This is a migrated post! Originally
Online Container erstellen Vorgehensweise
Hallo, wie und wo sollte ein online container erstellt werden. In meinem Beispiel habe ich ein Popupbild, das auf 30 verschiedene Steuerungen zugreift über Substitution. Soll online Conainer beim Auftstart der visu eingerichtet werden oder beim –ffnen
Report Viewer
Hi Everybody, In my project i have multiple Device. Am monitoring all readings related to Device and also communication status of that Device. My RTU is holding the reading even if the communication failed.So if communication failed i would like to display
Multitouch under Windows 8 reactivity
Hello, support team! We try to use 7.1 multi-touch functions using my Windows 8 laptop (Asus TX300CA). We turn-on WIndows 8 Multi-Touch recognition in project options. and select Worldwide screen call on start of double-sized target screen. As result
Screen Name identification in Double Monitors
Hello Gents, First Question: I have a double monitor project, i am opening same screens and frames in the startup so two monitors are clones and after project start it gives me flexibility of having different screens. I am getting the picture name from
Message sending via function
Hello Everybody I am having multiple bool variable.if any one bool variables goes to false then message will sent to user via outlook.One message will sent to user if one bool variable goes to false if multiple variable false then multiple message will
Curve name an axis titles
Hi. I wonder if it's possible to get a text string from a string variable presented as the curve name in a local trend screen. Also the axis title could be of interest. WBR S¸ren Bro. This is a migrated post! Originally posted on 30.08.2013 by user sbc.
Projektkonvertierung Sprachumschaltung in Textfeldern
Hallo, ich möchte dieses Thema für eine kleine Bitte an die Entwickler missbrauchen. Ab Version 7 (glaub ich) ist bei dynamischen Textfeldern die Eigenschaft "Anzeigetext übersetzen" hinzugekommen. Mir ist aufgefallen, dass bei der Konvertierung von Projekten
Bool variables in Report viewer
Dear all, I have a Bool variable for Communication status and these bool variables taken in historian so when i open report viewer am getting variable status as 1 or 0. But i would like to display as "Ok or Not Ok" instead of "1 or 0". This is a migrated
Communication Failure Indication
Dear all, I have a Bool variable for Communication status. If Communication failed then Bool value = 0 otherwise 1. Our field device is holding the last values even in communication failed condition. But we have to change the values to ***** or in some
Using VSTA instead VBA V.6
Hello. I little confuse, because VBA Ver. 6 is deprecated MS technology. And MS suggest use VBA.NET, but in Zenon in most case i can't full functional replace VBA to new supper-puper .NET. Besides, in 64bit system some code not work properly, ActiveX
Using VSTA instead VBA V.6
Hello. I little confuse, because VBA Ver. 6 is deprecated MS technology. And MS suggest use VBA.NET, but in Zenon in most case i can't full functional replace VBA to new supper-puper .NET. Besides, in 64bit system some code not work properly, ActiveX
AK Driver Properties
Hello Gents, Because of a long story i would like to check AK Variables "Marker" property in VSTA for all my variables. For testing of one variable i used; C# Code: this.Variables().Item("Variable1").get_DynProperties("MERKER")ToString(); but it is not
Makro ausführen nach Textfeldeingabe
Guten Tag. Giebt es eine Möglichkeit in Zenon, ein Makro direkt nach der erfolgreichen Eingabe eines Textes in ein Textfeld auszuführen? Bislang habe ich nichts dergleichen entdecken können. Das ganze sollte ohne Schleife, welche eine Wertänderung überwacht
Report: Wieviele Filter kann man anlegen?
Hallo, wieviele Filter kann ich für einen Report anlegen? Ich bin gerade dabei einen Report zu erstellen der theoretisch bis zu 10000 Filter benötigen würde. Geht das überhaupt, und wenn ja, wie wirkt sich das auf die Performance bzw. die Aufrufzeit des
DynProperties sind immer leer
Hallo Kollegen Ich versuche mich gerade wieder im VBA-Programmieren. Jedoch ist jedesmal wenn ich die Methode "DynProperties" verwende der Rückgabewerte Leer.:confused::confused: Es komm keine Fehlermeldung!! Muss ich irgend etwas einstellen wenn ich
binary Reaction matrix GI status bit
Hello, I have a question about reaction matrix. For some signals, i want to check if its GI status bit is 1 via reaction matrix. But i couldnt see GI status box in reaction matrix. How can i check GI status bit? Thanks This is a migrated post! Originally
Header Project flashing random colours
Hello, I am using Zenon 6.20 and normally if we have a pc fail onsite because we have them all raided we can swap out a harddrive, change its credentials and we can recovery fairly quickly. However the siemens box pcs that we use has gone from a IPC627B
Sprachumschaltung in Unterprojekten
Guten Tag Ich stehe wieder vor einem Rätsel in meinem Projekt. Und zwar geht es dieses Mal um die Sprachumschaltung in Unterprojekten. Ich habe ein Global-Projekt, ein Main-Projekt und dann 3 Unterprojekte im Main-Projekt. Die Sprachdateien (Deutsch,
zenon Everywhere application for Smartphone
Hello colleagues Do you have any documentation about zenon Everywhere application? What is a Terminal Server? How can we install this server? Where can we take application for android devices? I didn’t find it on play market and installation DVD, only
Bilder Export von Runtime
Hallo. Es gibt im zenon 7.00 SP0 Build 7 den Project Doku Wizard für Export aller Editor Bilder im Projekt in BMP Dateien. Leider nur für Editor Bilder. Meistens benötigt man für Kunden als Doku die aktuellen Screenshots von "lebenden" Bildern im Runtime.
cdwpf code examples, where to get?
Hello, colleagues! Can you give to people some examples of cdwpf (with source code of course)? For example bargraph with code corrected percent scale, or something like this. This is a migrated post! Originally posted on 20.08.2013 by user stolyarov_as.
Problem with Web Server on zenOn 7.10
I managed to install all the necessary software and configurations based on the manual. Unfortunately i'm not able to run zenOn runtime from web client. attached here are the screenshot from my computer. in Services, Zenon Web is started but port 1102
Ip-Change(S7TCP32) with VSTA
Hello All, is it possible to change the ip-address from a S7TCP32-driver via VSTA-Editor? I guess i just donÂ't get the right property. i tried something like: myZenWorkspace.ActiveDocument.Drivers().Item("S7TCP32").get_DynProperties("IP").ToSting();
Button with dynamical functions
Hi, I have one substation with 30 siprotec devices, i need to have a button which acknowledge alarm and in the same time resets the leds only of the device which has TRIP (for example), and when I acknowage another alarm with this button from another
Pointer in Straton
Hallo Kollegen Ich würde der Funktion "VSISTAMP()" eine Variable übergeben. Diese Variable ist ein "IN/OUT" eines Unterprogramms. Gibt es dazu Pointer oder vergleichbares? Welche Datentyp muss der IN/OUT sein? Mfg Karnst This is a migrated post! Originally
Trend with Report Viewer
Hi! I want to draw trend on my report page. i made a .rdl file on 'myproject/Files/Report Viewer'. and then i add a trend figure to my page with visual studio. Query importing is ok, every thing ok, but this report not run online industrialpc (its working
Auto-Login
Hi, I'd like to implement a swipe card reader into our system. I'd like the operators to login using their own card. I can write the code in VSTA to read the code on the card. Is it possible to automatically login the user using VSTA? If I have a SQL
Zenon Webclient über Terminalserver
Hallo Zusammen, wir haben den Webclient auf einem Terminalserver laufen, und das Problem, dass bei den meinsten Anwendern die Meldung erscheint, der Dienst ZenAdminSrv konnte nicht gestartet werden(seltsamer Weise nicht bei allen). Der Fehler ist leider
What SNMP versions are supported in what versions?
Hello colleagues. We need to connect to equipment using SNMP v3. We search for SNMP versions compatibility information of zenon SNMP driver and one thing we found is SNMP Trap v1 и v2 starting from 7.00 version. So my question is what SNMP versions are
Log-Dateien begrenzen
Werte Kollegen Gibt es in Zenon eine Begrenzung der Logdateien, damit nicht über eine lange Zeit die Festplatte unnötig angefüllt wird? Wenn ja, ist dies Standardmäßig eingestellt?? Mfg karnst This is a migrated post! Originally posted on 14.08.2013 by
Anmeldung an Runtime geht "fast" nicht mehr
Hallo zusammen, heute ist mal wieder Staunen und Wundern angesagt: während die webclients völlig reibungslos ihren Dienst tun, ist es mir momentan nicht möglich, mich an der Runtime (auf dem Rechner, auf dem die Runtime und der Webserver laufen) anzumelden.
VBA Code automatisch ausführen, wenn sich ein Wert im Online Container geändert hat
Hallo, Ich möchte, dass mein Vba Script "Public Sub Home_Anzeigen" immer dann ausgeführt wird, wenn sich ein Wert im Online Container ändert. Das Script läuft soweit und wenn ich es manuell aufrufe macht es auch das was es soll. Der Fehler liegt also
External IEC 60850 variables names not recognised in ZenonLogic
Hi I've made externally visible several IEC 60850 variables so that I can do some data type conversions in ZenonLogic. These will then be allocated to IEC 60870 variables. The problem is although the variables are visible in ZenonLogic and values visible
Next Page