Recent Topics
PLCHandlerDll.dll - versions and PacDrive firmware
Evening - we are having issues connecting to a PacDrive with firmware 1.66.5.1, with firmware 1.56.21.13 it is fine. Anyone else had any issues with later PacDrives? thanks David This is a migrated post! Originally posted on 11.11.2021 by user synergyautomation.
Problem during driver iec870_103 implement
Hi everybody, I need your help!! Here i am going to communicate with some protection relays using 5-103 protocol, but when i used the simulator to communicate with zenon driver, i found the first telegram sent by the driver is "10 47 01 48 16", that means
layering visibility
Greetings everyone!! I would like to ask about layering. In Engineering Studio we can create layering by visibility level. However, it not effect in service engine. How can i make layering visibility in service engine? This is a migrated post! Originally
Reload project after add-in rebuild&deploy
Hi, after making changes at add-in, for that runtime accepted the changes, I need to restart runtime: delete that add-in form the list, after rebuild and deploy, I improting that add-in once more, saving changes, generate runtime files, copy that files
Scheduler problem
Hi, Trying to use Scheduler to run compressor station at my customer site. Unfortunately struggling to set it up, i have created Scheduler Group, Disabled the updating from editor to RT, created RT Scheduler Screen. I am able to create switching points
Open screen if variable value is?
Hi all. I have main navigation menu where I have few buttons (screen switch). But for some screens I should to open screen with subnavigation menu. How to remeber which of subnavigation screens was opened and open it again automatically when main screen
MBUS32 - Standard M-bus
Hi to all, I need one small help. So I'm testing on Zenon 8.10. connection and read out of Siemens water meter on M-bus protocol. For master I use Relay PW20, and its connected to Zenon over RS232 cable (setup is the same like on photo in attach). I managed
FillColor screen element
Hi, I made some code: C# Code: using Scada.AddIn.Contracts; using Scada.AddIn.Contracts.ScreenElement; using Scada.AddIn.Contracts.Screen; using System; namespace wizardHighlightSelectedRow { /// /// Highlights Selected element on the screen /// [AddInExtension("wizardHighlightSelectedRow",
Avalanche Alarm
Hi everyone, I would like to ask regarding the AML. Is there any properties that I can configured in the AML, to handle the avalanche alarm situation. I want to make sure the non-critical alarm is not flooding in the AML screen in the avalanche situation.
Change representation of Numeric Value element using interlocks
Hi, I was wondering if it is possible to link interlocks to "Numeric Values" to use the project setting how interlocked elements are represented (greyed out, invisible, normal) ? My current workaround is to use limits of auxiliary variables which then
Vba editor is not opening?
Dear Zenon team, VBA editor is not opening when press on right click on programming interfaces in zenon editor(V7.60). Please help me. Thank You This is a migrated post! Originally posted on 27.10.2021 by user salman_123. Please be aware that information
How to run Runtime and Client together
How can i run Runtime and Client (zenon 10) on the same system ? This is a migrated post! Originally posted on 27.10.2021 by user Lukas. Please be aware that information can be outdated.
Decision System
Hi everyone, I would like to ask...is there any method that i can use to configure a decision system that can aid user if there is abnormal situation instead of using pre-defined help function. for example, if the alarm occur, then there will be a kind
Update Structure @ Analyzer Version 3.30
Hi everyone, The new variables added in the Analyzer datasets are not transferred to report layout when we do Update structure. I dont wanna loose all my layout and arrangements in the RDL thats why I prefer only update it but that does not work. Is this
Report Engine and Report Launcher
Hi everyone, I would like to ask what is the difference between report viewer and report launcher. Also if i have three machine (database server, SCADA server and a workstation) which application should be installed Many thanks This is a migrated post!
Backend app on base of clients events
Hi, add-in backend application conception (considered for web client and HTML Web Client): in zenon Supervisor we have one workspace, main global project, main project and its subprojects (a lot). it works as one app. Something like apps with static void
Trend curves disappear
Hello, I have normally configured Extended trend. After some time on some Trend screens, curves become invisible. When I configured Extended Trend screen again (delete existing curves and set again the same) it started working again. Any explanation or
VSTA cannot enable
Hi, everyone. I hope everyone well. I have some problem. I cant enable VSTA from Application>Options. When I try to enable it, the progress windows is appear a while that close the Application Setting windows. I hope anyone can guide me to solve this
DR Directory Data View
Hi, I had fetched DIR data from relay it shows in "*!Directory" variable. Relay consist of multiple DR files. I used dynamic text element to view that file, though it have multiple data view could not able to view all in single time. Is there any option
Changing Identification of Variable
Good afternoon, I want to change the Identification text of a variable during the runtime using a dynamic text element. The reason behind it is the following: I want to make a flexible system that can be implemented on different sites. Where the user
ProjectServiceExtention Stop() Status
Hi, I have created add-in, and try to execute him few times, after pressing button. For first one click, he executs, but for second on he is not starting. When I open window "Manage Service Engine services", against of add-in his status as "Started" (but
AML/CEL Filter based on Variable
Hi, I was wondering if it is possible to filter an AML/CEL s.t the filtering is based on a Variable? E.G.: NAME_TO_SHOW="UNIT A" Show all alarms from Variables which contain NAME_TO_SHOW in Variable identification. Of course I could define separate screen
Scaling values in Zenon 8.2
Hi all, I'm polling values from a PLC using DNP3_TG driver. The PLC provides analog values for Phase Currents, Voltages, Power.... Some of the data needs to be linear scaled down/up by 10 to represent the correct measurement. Is there a way to do it in
projektübergreifende CEL?
Hallo zusammen, früher hatten wir einfach ein Projekt, und in diesem waren alle unsere Steuerungen integriert. Inzwischen ist das Projekt deutlich gewachsen und wurde deshalb in ein Integrationsprojekt und mehrere Unterprojekte aufgeteilt. Seitdem habe
Standard Recipes grey window
Hey! I'm working with 64 bit ZEE 8.20 build 67700 and I encountered a problem. I was working with Standard Recipes window and it worked fine when I had only one recipe defined. When I defined a few other recipes, I couldn't access any other recipes anymore,
Empty General symbol library
Hello, I'd like to ask for a help. My General symbol library is empty. Is it possible to find somewhere the basic symbols and import them? Where are they if so? I'd like to use the symbols as on the screenshot below, it's from Energy edition training.
CSV file import error
Hi, I'm trying to import a CSV file in utf-8 encoding(Converted to .txt form using excel) for the variables list to create variables and for some reason, Zenon throws an error that the import cannot be carried out everytime I try to import variables using
Some of numerical display value = -nan(ind)
Hi all. What is the meaning of variable value -nan(ind)? Variable outside range or?! Best regards, MK This is a migrated post! Originally posted on 17.09.2021 by user milosh. Please be aware that information can be outdated.
Write multiple SDO in canOpen
hi is there a way to write multiple sdo at one time ? function coWriteParam function block write only a single sdo This is a migrated post! Originally posted on 10.09.2021 by user mos89. Please be aware that information can be outdated.
Adding notepad
Hi, I would like to ask, is there any function that I can use to call external application in the runtime. Eg: I would like my operator to leave a note. Thus, by single click he can open notepad and write the note on it through runtime. Thanks in advance
Problem importing runtime files
Hello, I have an issue with bringing back the runtime files from the hmi to my laptop. I manage to connect succesfully, *** Received system status from remote computer: Computer name: DESKTOP-T99A620 Operating system: Microsoft® Windows® XP/Vista/7
Zenon 10 installation failed. Reported "Error 0x80070643: BA aborted execute begin"
Need help! Failed to install Zenon 10 in Windows 10 (20H update). Tried numerous way (uninstall VC redistributable, .net, DB...), no clue how to solve this. The LOG show errors below (or can get the full log in attachement): [3404:1BB8][2021-09-04T22:04:44]i000:
Time Control is not executing any task
Hi community I am having a problem with executing tasks with the Time Control of Zenon. A lot of testing and forum search has been done by me at the last days without fixing the problem. We are running two Zenon server in redundancy and a client. All
VSTA does not work on WebClient
Hi, After upgrade version 8.00 to 8.20 VSTA macros stopped working. The zenon6.ini file has [VSTA] ON=1 CSHARP=1, the general application settings "Enable VSTA" in the zenon startup tool is checked. Macros work propely on the other runtime (zenon ediotor
C# WPF ViewModel-Variable über DependencyProperty mit zenon Variable verknüpfen
Hallo, ich möchte eine Variable aus dem ViewModel eines WPF Control, dass nach MVVM designed ist, herausführen und mit einer zenon Variablen verbinden. Als Beispiel habe ich dazu das "simple" WPF Control aus der zenon online-Hilfe (Addieren von zwei Zahlen
Draw line dynamically?
Hi all. 1. How to dynamically draw polyline on scada screen? We have 10 measuring points, which should be connected with lines. About every 5 minutes, scada get meas. value. 2. Extended trend - how to clear trend on variable change. So, when variable
Addin lose COM connection
Sometimes during runtime addin lose COM connection to Zenon Runtime and execution locks in member access call like "context.Name". No way to exit from this condition other than restart runtime. How do I have to change code? Try-Catch block doesn't help.
CEL/AML Data Loss with PC shutting down unexpectedly
Hello, I wonder is there any option to prevent data loss in AML/CEL when PC or (runtime-service engine) shutting down unexpectedly? Or is proper shutting down only way to avoid this kind of problem ? Thanks for help WIN10-64BIT zenon8.2 This is a migrated
TABLE .ALARM en .CEL not created in SQL database
Hello, For some reason when I create an Export CEL/ALM function that has to Export de CEL/ALARM to the SQL database the table that I want to create is not created in the database that was selected after closing the setup dialog. (dbo._ALARM or dbo..CEL).
Reset zLogic soft plc from Runtime?
Hi all. Is there any way to reset soft plc from runtime? BR, Miloš This is a migrated post! Originally posted on 23.08.2021 by user milosh. Please be aware that information can be outdated.
Next Page