Recent Topics
StandBy not returning to passive mode
Hello, We used redundancy with zenon and straton (zenon logic) and we have a problem : - When starting the 2 computers, one is active and the second one is in passive mode (normal) - When we unplug the network cable on one computer, the passive straton
Sichtbarkeit von Objekten über verschiedene Bereiche
Hallo, wie realisiere ich am einfachsten eine Sichtbarkeit eines Objektes über verschiedene Wertbereiche einer Sichtbarkeitsvariablen (z.B. von 1 bis 4 und von 6-10) Normalerweise kann ja nur ein Bereich angegeben werden... Grüße Johannes This is a migrated
DownloadTool funktioniert nicht?
Hallo, nachdem ich gerade zu meinem Erstaunen feststellen musste, dass die auf der DVD mitgelieferte Doku bei Zenon7 extrem dürftig ist, folgte gleich das nächste unangenehme Erstaunen: das DownloadTool funktioniert nicht. - Also zumindest nicht bei mir.
CEL Text for Command Actions
Hi, I have configured a Command Group with an Action of type 'Setpoint input' and a Return state/switching derection 'DIR'. The Set value is '65'. When this Action is reported at the CEL the entry in the Text column reads 'Set Value: 65' Is thaere any
Abgleich Archiserver
Hallo, folgende Netzwerkzusammenstellung: Server zenon 6.51 Windows Server 2008 R2 64bit Standby-Server zenon 6.51 Windows Server 2008 R2 64bit Die Editierung erfolgt am Server. Problem: Beim Nachladen, auch kleinster „nderungen und v.a. kurz hintereinander,
VBA and CEL
Hi, I have a VBA script which reads the state of an internal variable in Zenon and is currently creating an entry in the CEL. The internal variable limits are not sent to the CEL. How can I suppress this entry ? Cheers, Rob This is a migrated post! Originally
Textbox and Send Button symbol
Hello, I'd like to create a symbol like this: I need not to send a value to the driver when it's write in the textbox, but when you press the button. I'm almost at the end of the problem but I still need a little help. These are the steps I've made: 1)
Context menu with authorization level
Hi, is it possible to disable the visualization of a context menu for an unauthorized user? I know I can lock all the elements of the context menu according the authorization level, but the menu is still visible. I need to avoid showing it if the user
Extended trend with opc-variable
I try to use extended trend with archive. First, I set up the archive. The archive contains one variable from the opc-driver (opc-variable name: @PBuilding.@SLocations.@DF10_Vent.@OHwInput12.@NnvoTemp4_val.@FSNVT_temp#SI). If I use this variable then
M-Bus auf Ethernet und mit M-Bus Treiber Zenon
Hallo zusammen, wir wollen Genre über einen M-bus-Ethernet-Gateway (Wachendorff) über den M-bus-Treiber (Zenon) Implementieren. Hierzu würden wir ein Gateway von Fabrikat Wachendorff Benutzen. Da der Zenon Treiber für M-bus eine COM-Schnittstelle braucht
Create a busy indicator
Hello, I use a VBA procedure to analyse and write huge files. It takes a while to write all the data to the files. To show the user, that the application is busy but didn't crash, I would like to display a hourglas (or something else). I think it should
API-Zugriff auf Function-Filter
Guten Tag, ich würde gerne über die API Filter einer Bildumschalt-Funktion ( 'Screen switch' ) konfigurieren. Die Funktion ist bereits angelegt und die Filter vorkonfiguriert. Aus C# will ich neue Data-Sets anlegen, editieren und löschen. Leider ist mir
Combi-Element in Symbolbibliothek
Hallo, ich habe in der Symbolbibliothek Symbole angelegt, die mit Combi-Elementen arbeiten. Jetzt würde ich gerne mehrere Variablen dieser Combi-Elemente freigeben, aber das scheint nicht zu funktionieren. Zumindest finde ich weit und breit keine Option,
IEC 60870-104 Slave in Straton
Hello Colleagues I have tried to use IEC 60870 Slave driver in Straton. I inserted IEC 60870 Slave in Field bus configuration. After it I added Master/Port (Connection) and Slave Data Block (Device) for IEC104 communication. But I couldn’t add variables
Dachprojekt inkl. Unterprojekte sichern
Hallo, ich hab da mal eine Frage zu dem Dachprojekt. Kann man das Dachprojekt inkl. Unterprojekt auf einmal sichern, d.h. mit der Projektsicherungsfunktion. Wenn ich es versuche wird nämlich nur das jeweilige Dachprojekt jedoch keine Unterprojekte mitgesichert.
Archive xx uncompletely read message
Hello, colleagues! We try to move from Zenon 6.51 build 14 to 7.00 build 2 version. So we have some questions while this process, that is one of them: In our project we use self-written program module to archives access with use of archiveFilter.QueryBlock
Email message while running converted to zenon7 project
Hello, colleagues! We try to move from Zenon 6.51 build 14 to 7.00 build 2 version. So we have some questions while this process, that is one of them: While starting runtime with our test project we get message with header text "Email" and body text "This
RtFunction substitution, symbol's elements access
Hello, I have problem with getting full list of variables used in screen which is substituted. So far, only solution, which I have found, is extraction of variable's names using "ItemVariable" method. It would be quite good solution, but when screen contains
XY-Diagramm mit Erweiterter Trend Modul
Hallo, ich möchte mit Zenon 6.51 Messreihen als XY-Diagramme mit dem Erweitertem Trend Modul (nicht Starter) darstellen. Die Daten werden in einem S7-Datenbaustein in einem Array aus Integerwerten abgelegt. Jeweils ein Array für X und für jede Y-Kurve.
dyn. Text aus Excel-Tabelle auslesen - 6.51SP0B1
Hallo, ich brauche dringend eure Hilfe, schon einmal Danke im Voraus Folgendes Problem: Ich habe ein Bild mit 255 Textfeldern. Beim Aufruf dieses Bildes möchte ich, das der Text in jedem einzelnen Textfeld durch den Text aus der Exceltabelle ersetzt wird.
variabler Alarmbereichsname
ein Kunde möchte seine Anlagen je nach Aufstellungsort unterschiedlich benennen. Bei einem Aufstellungsort heißt die Maschine "A" und bei einem anderen z.B. "B". Ok, das lässt sich leicht mit ein paar Variablen verwirklichen. Nun soll aber bei Alarmmeldungen
Projekte korrekt konvertieren ? 6.20 => 7.0.0
Hallo Zusammen, gibt es hier eine Anleitung wie man Projekte richtig konvertiert ? Mit richtig konvertiert meine ich : - das alle Symbolbibliotheken da sind - das aller Verknüpfungen mit den Bildelementen und Variablen da sind Was ist der richtige Weg
Report Viewer / Create pdf automatically
zenon 7 SP0 Build0 Hallo, Frage zum Report Viewer: Gibt es eine Moeglichkeit, den "Create PDF" Button auch ueber einen Funktion oder mittels VBA zu aktivieren, somit die pdf-Datei zu exportieren? Vergleichbar in etwa mit der Funktion: "Export Report".
Beckhoff BC Buscontroller Treiber - Performance Problem
Hallo, Ich setze gerade bei einem Projekt den Beckhoff BC Treiber ein. Wenn ich jedoch per Zuweisung mehrere interne Variablen(ca. 50) auf die Steuerung schreiben will, dauert das ca.35-40 sec. Dasselbe funktioniert mit einer Vipa SPS und dazugehörigem
Update OnLIne User List in VBA
Hi All, In Zenon7 sp0 Build 2 I have used a lot of VBA to create my personalized editing function for manage the "User List" . The last function that I would like to implement is the read-back of the last saved Password.cmp file, used to backup in encrypted
Embedded IE version
Hello Im having a rather strange problem when I try to use internet explorer as an active x component. I have installed IE 9 on my computer and are using Zenon 6.51 sp0 First I added the Microsoft Webbrowser from the active x list. I could see that it
OPC Client configuration
Dear support, I'm a new Zenon user, and I hope this is the right place to write. I've started using Zenon for importing some Wit RTU with an OPC Driver. I've noticed that OPC is a bit hard to configure, but I've got a problem that you may solve. I've
OPC Client configuration
Dear support, I'm a new Zenon user, and I hope this is the right place to write. I've started using Zenon for importing some Wit RTU with an OPC Driver. I've noticed that OPC is a bit hard to configure, but I've got a problem that you may solve. I've
C# - write stringvalue to a Picture Element (Screen Type: Login, Element: Current user)
Hello everybody, I have tried to assign a stringvalue to the control element "current user". It apears not to be possible to reach the value thrue the object modell, there is no object which discribes the value like the object "text" of the element "static
Question about Project_Log.LDF
Hello, I have a file in the below path is too big, what it is? C:\Documents and Settings\All Users\Application Data\COPA-DATA\SQL\00ae9b66-df68-4e95-a468-98d39949a487\SQL\Project_Log.LDF It takes up more space (1.8GB) of disk C: of my laptop. Can i delete
Popup 'Archiv XY nicht vollständig eingelesen'
Hallo, wenn ich in der Runtime Archivabfragen weiter zurück in der Vergangenheit mache, erscheint immer folgendes Popup: ############################### Archiv 1S nicht vollständig eingelesen Bitte kleineren Zeitbereich einstellen! ###############################
SNMP v2c Informs
Hallo, werden vom SNMP Treiber auch SNMP Informs ("quitterte" traps) unterstützt? Diese wurden mit v2c eingeführt. Gruß Eric This is a migrated post! Originally posted on 26.09.2012 by user scheweeric. Please be aware that information can be outdate
DNP Analog Inputs
Hi, I have DNP driver and it is communicating properly with the devices :). But am not getting the fractional values for Analog inputs (real) from the slave. Even i configured the number of decimal points as 2. TIA This is a migrated post! Originally
DNP commands
Hi, I have to use DNP pulse commands , how we can configure the same in Zenon 6.51 SP0. DNP3 slave needs pulse commands. TIA This is a migrated post! Originally posted on 26.09.2012 by user ansab.tp. Please be aware that information can be outdated.
ZenonRT hangs
Good day. Periodically ZenonRt hangs and I get error message: Description: A problem caused this program to stop interacting with Windows. Problem signature: Problem Event Name: AppHangB1 Application Name: Zenrt32.exe Application Version: 7.0.10450.0
VBA on the client
Hello! I have the project with 2 PCs: the first with Editor and Runtime as server, the second only with Runtime. So the same project runs both on the 1 and on the 2 PC. I have created mouse over VBA, that contains simple code: [SIZE="2"]Public Sub MouseOver_EO_WO2_KM1(obElem
How to access DynProperties("Function") of a button
Hi, I'm trying to execute a function linked to a button element from vba. But i cant figure out the syntax to execute the function. Hope someone can help me out here. Public Sub LeftClickUp_Default(obElem As Element) Dim Func1 As RtFunction Set Func1
How to access linked symbol sub elements
Hi to all, I'm searching for a way to dynamically access sub elements of a linked symbol instance inside a picture. In particular I need to search for the Function dynproperty inside a particular subitem of a linked symbol. I'm able to know the LinkedName,
trend element
hello,mark i have a question about the trend element. The y axis represents the Percentage of the online value But i want to display the value on the curve,how can i do ? Secondly,if i can let the curves show multi y axis?:confused: This is a migrated
C# form on screen
Hello I would like to know if its possible to embed a C# winform (vsta) on a screen? The only way I can seem to work with winforms is in a popup. Is there other ways? Best Regards Brian This is a migrated post! Originally posted on 18.09.2012 by user
Next Page