Highlight a Symbol Using a Button
Hello, I need help in achieving a specific task, the version am using is Version 11 Build111398 64Bit. The problem statement is: 1) I have a custom Symbol with 2 buttons, each will open a specific window. 2) The highlight is a rectangle that will act
Screen View Issue in Zenon 10 on Win 11 OS
I am facing issue with standard user profile. Whenever I click on Screen in Project view then my project navigation pane getting un-pin and hide. Each and every time I need to click again on Load Standard Profile button. Please find attached step by step
Checking Batch History
Hello team, I have used various versions of Zenon starting from 7.00, however, I have a query where, I can check my lot name history for it to be unique. As per our customer's requirement, the lot name(which is combination of my "Batch name" and "Lot
SCADA Zenon & C#
Hello everyone. I'm a beginner in SCADA Zenon. I know that in the basic version of this software, it is possible to write scripts in C#. How can I do this? I need to work with tags and write computational formulas.
"New Screen" Dialog don't open
Hello everyone, I'm new to zenon and i'm following the zenon basic training. I'm ready to create an alarm screen and when i try to create a new screen to select the ALARM MESSAGE LIST special screen type, the dialog doesn't open and zenon creates a blank
How to modify frame depending on the screen
Good morning everyone! I'm doing now in a project a navigation system, and I'd like to use the same frame for a set of screens, that all have the same width and different height. Is there a way to change the height of a frame accordingly to the screen
Structured signal names
Hello Dear! In accordance to customer requirement all signal names have to be structured. And length of each part of signal name should have the same length. The goal is to have easily reading CEL as shown below: My Idea is to use "TAB" symbols as separator
Process Gateway -IEC101 - double command T46 with SBO
Dear Support, I have achieved Command Processing in Zenon EE v11 . Status (response variable) is CSWI2/Pos/stVal[ST] and action variable is CSWI2/Pos/Oper.ctlVal[CO]. Everything works fine in service engine from my station PC. Now the Remote Dispatching
Latency runtime
Hello We encounter in our factory several latency problems with the activation of HMI buttons. It turns out that sometimes we are forced to press several times to get a response from the runtime. Can you give me the steps to adjust a parameter or find
Whether Installed Zenon 10 build 10031 in Windows 11 Pro 12th Gen. laptop. works?
I have installed Zenon 10 Build 10031 in my Windows 11 pro 12 Gen. laptop. Installation was successful without any error. Standard services registration was also completed properly. But I am facing following two issues: 1. When I started Engineering Studio
Is it possible to make a dialog window open at a exact possision on screen
Hello, i am trying to find a way to make the setpoint input window from a dynamic text field open at a spesific place. Is this possible Thank you
How to change the size and possision of the alarm status line
Hello, i am trying to change the size and possision. I used the help option and read " select the alarm status line and deactivate the Use standard position option." but i cant find it :O thank you
how to insert a image to a screen
hello, how do i insert a image to a screen? i want to add the company logo to the top left of the navigation meny.
Number of Tag's when using smart objects
Is it correct that when I use a smart object template with for instance 50 IEC61850 signals and create a smartobject with this template and link it with the 50 IES850 signals from a specific feeder that i use 100 tag's per feeder? Steps taken: Number
driver with ID '1000027' is unknown!
I'm using the Zenon demo project for creating a template for a new project but whenever I open the project even without any variable in the project ,attached error messages raise. How can I get rid of these?
Source Column in AML and CEL
Hello, I would like to know how to add "source" column in AML and CEL. My purpose is to show the source device (e.g. RTU, IED, Gateway) of the incoming signals which is communicating with Zenon via a communication protocol (e.g. OPC-UA, IEC 104, IEC 61850)
Replace Index Variable in Screen switch function using VBA
Greetings, I’m writing code to create functions with VBA. While creation of RT function is successful, I’m getting an error while replacing Index Variable in Screen switch function. Please note that Zenon version is 8.20 I’m following this example from
How to differentiate signal Identification / description from Smart Objects in AML / CEL table
Hi all, I have 1 Smart Object Template (Circuit Breaker) with Variable "ST" - Identification = Description "Status" with event (Reaction Matrix) "Close, Open" , and about other 40 variables with event like that Then I have 2 Smart Object from that: CB1
CEL cumulative export
Hello! In accordance to my customer specification, event list to be stored in dedicated location with following parameters: -One *.txt file per day must be created, continuously updated and stored with the daily schedule (e.g: 20100201.txt) - The storage
How to create and configure hundreds of Smart Objects
Hi all, I am working on an energy project that have 8 blocks, each block has 32 to 48 inverters (totally about 300 inverters). Each inverter model has variables, screens, logic functions. For efficient update of model in future, my idea is creating smart
Display and Calculation of Epoch time
Hi all, I am working with inverter's signal list. Some of them are Start-up time and shutdown time that have datatype of "Epoch second" (number of seconds since 1/1/1970 0:0:0). The driver is Modbus, so using UDINT for time with "Epoch second" type is
more zenon versions on the same windows OS
Hello, is possible to install and use the Zenon version10 and v.11 on the same OS separately? Thanks.
AUTO LINE COLORING
In ALC, if the type of the used variable is integer, the automatic line coloring (ALC) will not work correctly in all cases. In this case, a four values of the variable are used which are (0,1,2,3). two of these values (1,2) are working as intended, and
Closing a screen with a WPF in it crash the editor
Hello, Last version of Zenon 10, I try to save a screen with a WPF element in it. Editor crashes with attached error file. What can I try to improve the situation? Best regards.
Zenon 11 - IEC850 Driver Configuration Wizard error: Configuration Failed
I use IEC850 Driver Configuration Wizard to configure the drivers but when I click Apply, it always appears the error log: Configuration Failed for whatever changed: creat new driver, change existing driver name, add new report, manually or from *.cid
Set Fonction by variable
Hello, i 'm beginner on Zenon Software, i 'm trying to start a function by used a variable ( from logic). There is not a possible to link a variable in the function parameter's. How can i do this? Manu
Erweiterter Trend mit Beckhoff-Steuerung
Hallo, ich habe folgendes Problem: Ich möchte in meinem Projekt ein Bild vom Typ "Erweiterter Trend" einbinden (Onlinedaten, genauer vom Datentyp TIME und REAL in jeweils eigenen Bildern, direkt aus der SPS, Treiber: Beckhoff TwinCat NG driver; YT-Achse,
Zenon 11 Projektsicherung rücklesen nicht möglich (Login an SQL Server [SQL2019] schlägt fehl)
Hallo, ich habe soeben Zenon11 installiert. Nun möchte ich eine Projektsicherung rücklesen, jedoch schlägt das fehl. Mit dem System Information Collector habe ich herausgefunden, dass ich keine Verbindung zu SQL2019 habe, der Login für 'zenOnSrv' schlägt
Download zenon V6.20
Hi, I want to download Zenon V6.20. Actually only the recents versions are available. Best regards
using alarm class color in AML only on Priority number (Alarm class number)
Hi everyone, one of my clients is asking a specific format for his alarm list he is looking to use the color alarm define in alarm class only on the Alarm class number. I looked in AML it seems the only choice possible is on time or whole row. here a
object explorer in the screen
Hi everyone, I quite new in Zenon but have experience on other HMI software. one of the feature that i'm quite fond in other engineering tool is object explorer that can show you all the element present on the screen and you can select it from there.
TREND - Marks special points
Hi All!! I am interesting that is possible in Zenon set something like i did in Report builder. (see below) I mean vertical line which show me changes phase in my process (normal value set in historian - on change). Exist any way to make something similar
Set ReleasedProperty via c# doesn't update in the runtime after compilation
Hello everyone, I have created a C# Addin Wizard for the Engineering Studio to create a SmartObject via a json configuration file. The addin first creates the smart object and then updates all the released properties of each symbol to have updated symbols
Print Function
Dear Forum, I have two monitors in project. I added button for print screen function. The problem is that it only prints one screen-V_01, but V_02 is not printed. Is there any additional configuration for printing of both screens? In function description
Is there any tool for variables monitoring?
Is there any tool that could help me identify the usage of a variable? (what objects they are linked to. If used in the Zenon logic or not, and so on).
command processing screen
hey I'm learning on zenon energy basic edition in zenon academy but when I reached the command processing chapter, I followed the same steps but the screen is not working with me. can anyone help me ? when I open the diagnostic viewer it says that the
No database access project zenon 7.6 after install zenon 10
hello I have two zenon 7.6 and zenon 10 licenses I currently use version 7.6 for my projects, I wanted to install version 10, everything went well but now I can no longer load my projects in version 7.6 because it tells me that the databases are not accessible
Monitor Profile
Hello everyone I hava a project with Energy Edition v8.1 ,normaly there is a standart monitor profile in monitor administration, but my case there is not standart monitor profile and I can not add new profile ,how can load or retrive standart monitor
XML Editor that works with Zenon exported files
Dear Community, Please recommend an XML editor which works with format of Zenon exported files. I'm trying to export some variables and edit them, since variable type is an array I can't edit them in CSV or dbase format. I can edit XML file in MS Excel
Zenon DMS Demo
Dear Community, Can anyone provide Zenon DMS Demo project backup? Preferably version 8.20
Next Page