Recent Topics
problems with zenon logic
hi' i have a problem in one project: when i start the zenon runtime an error of "initializing the SCADA logic runtime faild" comes on. this cause problems in graphs and other functions in the run time. the same project in other computer works fine. what
Zenon Runtime connected to multiple PLCs
Dear All, I would like to ask about network settings. Our Zenon application will communicate with multiple PLCs on the field (Beckhoff PLCs) But these PLCs are not on the same network, not in the same IP range. Therefor we have multiple network adapters
Demo License not working
I have installed zenon-08 on server-16 but it is not working in demo mode. please guide me over same. same is working on previous installation. This is a migrated post! Originally posted on 24.04.2019 by user gadre14. Please be aware that information
Backfill Trend data using DNP3
Hi guys I am using Zenon Supervisor as a central SCADA monitoring @ 400 RTUs that send data on DNP3 protocol, over GPRS modems. The requirement is that whenever the communication link fails, the data must be logged in the RTU. We are using Sixnet RTUs
Openning Logic project in Editor Using Macros
Hi, I just done all VSTA/VBA training and interested in which. but I am not good at programming skills. I often use Zenon Logic project in the practical project. So, I wonder I could open another Zenon project's Zenon Logic project and see My previous
Zenon Operator freeze
Hello after installation of windows OS updates the Zenon Operator start to freeze without any visible reason close the application and reopen again solve the problem for couple of hours but it's came back after some time please help to find windows KB
Reg: In Report particular cell value is corrupted
Hi Team, Report value got corrupted at particular cell value, Refer to the image attached, particularly in second row and frequency column we are seeing this corrupted value. Please look into it and support. Regards Sarav This is a migrated post! Originally
Problem with ReMa, 61850 Report communication and delay time
Hello, I have a problem with delay in reaction matrix in zenon energy 8.00. I'm using a 61850 driver with Report Enable (All my data points are tagged with COT0, COT1 ). I configured a Binary Rema with a short delay (5s) to create a new entry in alarm
Historian architecture
Hi Support, We are developing a SCADA to monitoring and control 8 electrical substations and power plants. Customer are asking for this configuration: 02 Servers + 02 Clients + 02 Historian (redundant) in 6 different industrial computers. For this we
file format supported in 3d configurator
hi everyone, I want to know What 3D file formats does zenon support(can be inported into 3D configurator) and the maximum file size supported for each format? thanks for your time This is a migrated post! Originally posted on 15.04.2019 by user alfaexec.
Alarm Offline Print
Hi, I have configured Alar_G.frm file as per online help and added in the Files--> Texts and Formats. When I was tried to give print then Alarms columns are similar to each other rows. I have attached here Alarm printed page & configuration files. Please
Individual Variable Alarm Acknowledge from Standard Screentype using Single Function
Hi, Is it possible to acknowledge each and every variable alarm individually from standard type screen (From Annunciation touch screen display). I have created the button to acknowledge area vise. But customer requires individual variable acknowledgment.
Variable bei Erstellung in Rezept einfügen
Danke P.S.: Ich verwende den Rezeptgruppenmanager This is a migrated post! Originally posted on 10.04.2019 by user wenzm. Please be aware that information can be outdated.
Opc ae
Is it possible to connect Zenon with OPC AE by using OPC UA? This is a migrated post! Originally posted on 09.04.2019 by user JohnBar. Please be aware that information can be outdated.
object oriented programming abb Zenon
is there a way to work with objects in Zenon? i can make templates but when you make a change in the template the screens using that template dont change. This is a migrated post! Originally posted on 09.04.2019 by user JohnBar. Please be aware that information
Zenon Data Event Alarm History Clear
Hello I want to known which foder Zenon contains History event and alarm data stored in PC Can I remove or clear it Thank you This is a migrated post! Originally posted on 06.04.2019 by user gunhunter. Please be aware that information can be outdate
ActiveX component can't create object
Hello So W10 64b / Zenon 7.20 32b I get this error when I run a VBA wizard. Have registered the OCX files and the standard program but no joy Any ideas please? This is a migrated post! Originally posted on 05.04.2019 by user lss. Please be aware that
Reg: Report value corrupted in particular cell
Hi Team, Report value got corrupted at particular cell value, Refer to the image attached, particularly in second row and frequency column we are seeing this corrupted value. Please look into it and support. Thanks & Regards Sarav This is a migrated post!
CEL doesn't record events when loss of connection to RTU
Hello, I've had some problems with getting events from an RTU when the RTU loses connection. The connected RTU stores the change of events when it looses connection to it's OPC gateway, zenon connects to the OPC gateway as an OPC DA client and reads the
geographic information system in Zenon
hello support, I need to use kMZ files but I do not know if the Zenon has the GIS functionality. Please indicate if it is possible to make such an implementation and how you could do it. regards This is a migrated post! Originally posted on 29.03.2019
Report Generator
Hi Team, As you can see from the attached screen-shot, the archive date is repeating in some of the adjoining cells to the right in Runtime. When I checked in the editor, the cells were empty and the font was also set to white. The formula used for the
Report Generator
Hi In few of my PC's I can find Report Generator but few of my PC's dont show that in the Editor. What is the Problem?? :-/ This is a migrated post! Originally posted on 28.03.2019 by user Praveen Kumar Karthikeyan. Please be aware that information can
Zenon Logic to check if a Zenon Variable is online
Hello everyone! I'm using Zenon Logic to check if a 61850 variable on Zenon (External Visibile) is Invalid through VsiGetBit IsInvalid := vsiGetBit ( {QSACC!QSACCUPCIN/DP8GGIO6/DPI1/stVal[ST]}, 18 ) But in the first 10 seconds of start of the Runtime,
Database cannot be opened
Does anyone know how to solve database cannot be opened in zenon version of 7.60 that installed in OS system of Windows 2012 Server R2? Is it database problem will influence restore backupfile function? As for my case, the backup file can be selected
Events classes, specify in a variable without reaction matrix
Hello, I have a problem with the event classes in the reports. I want to filter the events in the .pdf reports with CEL classes that I previously created. I cannot specify the class of the event in a single variable without reaction matrix. And if I use
Elements are not visible on screen editor
Hello, I'm starting using Zenon for the first time and I've installed the version 8.00 on my laptop windows 7 Pro 64. I'm having a dificulty when creating new screens because when I try to add an element (button, combo box, line, etc..) the object is
Grenzwertfunktion bestimmter Variablen oder bestimmte Funktionen deaktivieren
zenon Version 8.00 Hallo zusammen, ich habe eine Variable vom Typ Bool und löse damit, falls diese den Wert 1 hat, über den Grenzwert eine Funktion aus. Dies soll aber nicht dauernd der Fall sein sondern nur zu bestimmten Zeiten. Ist es möglich, zur Runtime,
Reaction matrix disappearing after import
Hi, I am using the Zenon 7.6 energy ediiton. I am facing an issue wherein every time I import the variables from .CSV format into the editor, the reaction matrix of those variables get deleted. Is this a bug with Zenon 7.6 This is a migrated post! Originally
Static assignement URCB : they are not enable and reserved on IED's data model
Hello everyone! I have a question that I can't explain myself. I'm using Zenon 850 Driver with a Static assignement RCB (Buffered and Unbuffered). If I browse online the Data Model of my IED (for example with IEC Browser or IED Scout) when my project
GIS Editor
Hello I'm trying to use GIS Editor in zenon Energy Edition v8.00 build 53129 I have connect to internet using proxy. May GIS Editor connect to map provider with proxy? If yes how to set proxy configuration? I made it in License manager but its don't work.
Network issue
Hello team, Has anyone faced an issue where the network traffic is affected because of Zenon Energy edition 7.6? I have a small network with 10-15 devices and 2 switches. There is some significant lag in the network. The switch configuration seems to
Variable Value Correction
Hi Guys I am facing a problem while communicating with Modbus. The issue is the Modbus slave is giving Junk Values suddenly (-65535 or 876728162876817). This is causing an issue when i aggregate it to 15 minutes average. Is there a way to correct the
Context List
I have a system where there is a context list for alarm causes. There are four PCs running Zenon, two line PCs (PC1 and PC2) and two servers (primary and standby). If I enter some alarm causes on PC1, they appear also on the list on PC2 as they should.
Zenon application hang
Hello, I am using zenon 7.60 build 49005. My application is running but recently I am facing application hang issue when my system is idle. So to troubleshoot problem I checked zenon log files,I observed following errors but I am not getting exact meaning
Erweiterte trend darstelluns aus Archivdatenherkunft
Hallo , Kann Jemand mir erklären , 1- wie ich der Trendsdaten aus der Archivedaten in Runtime darstellen kann? In Runtime werden nur die Trenddaten aus der ONLINEDATEN angezeigt. Wenn ich aus der Archivdaten darstellen möchte,werden gar nicht angezeigt
Macro for fixing nested symbol names
When nested symbols contain elements with the same element names, this will lead to problems when using the XML Import/Export. This macro fixes the project, makes all element names per parent symbol unique, and updates the linked symbols in screens. It's
Erweiterter Trend ==> Chargendrucken mit Dateinamen/Chargenquerverweis
Wir haben in unseren Visualisierungen eine Trendaufzeichnung mit Chargennummer realisiert. Wenn ich jetzt einen dieser Trends mittels Chargennummer öffne und ausdrucke, fehlt mir auf dem Ausdruck aber der Querverweis, welcher Chargenausdruck das jetzt
how to do OEE calculations in zenon
Hi Team, I want to create OEE, performance, availability, for my sun tracking system. I have 200 tracker control units in the field. I want to have availability and performance (MTBF) for each tracker and also calculate total OEE plant and display in
Zenon logic watchdog variable
Hi Guys, I'm using Zenon Energy 8.00. Is there any function block or method to check on HMI Zenon if the associate Zenon Logic project is running ? I would like to rappresent on HMI a light that is Green if Zenon Logic is running and a Red light if Zenon
Zenon V8.00 - Recipe name is empty
Dear Smart people of the forum! We are working on a Zenon Supervisor project lately, because we need to do some update here and there. The project was created many years ago and the origin is unknown. Through the years, the project has been updated multiple
Next Page