Data from server
Hello, I'm using zenon7.10 SP0 Energy Edition in a power plant, for general diagnosis purposes. My goal in to display graphs, trends and different energy parameters in some custom screens, with archiving possibility for captured data, from a SCADA server,
Tapcon commands with 61850
Hi, does anybody know how to set command raise/lower for tapcon on Zenon HMI? Tapcon expects values 1/2, but I can only set 0/1 because command variable (xxx.ATCC1.LTCBlk.ctlVal) is BOOL and it can not be changed. Please help, I have urgent situation
Unlocking in commands
Good Morning, we have defined command groups with several interlockins for each action and they are working fine. Now, our client wants these interlockings not to block the commands, only to inform. I have tried with the "unlocking" button but it does
IEC 61850 Error
Dear Support, In one of our projects we have Zenon running on server connecting to 1000 IED devices using IEC61850 protocol, time to time runtime is stopping and appearing one error "IEC61850 out of memory" see attached snapshot. This is a migrated post!
Sicam 230
Hi, I have two AK1703 and two SICAM 230 devices on network. The first network consists of AK1703 and SICAM 230 that receive information from one group of relays via IEC61850. 2nd network consists of AK1703 and SICAM 230 that receive information from another
Setting transient values to 0
Hi, in our project we have transient type signals (protection signals from equipment) from wich in Zenon we only receive status to 1 (trip) but not the 0 status (normal), so that in Zenon we have to set this signals to 0 in order to have information of
Commands for analog status variable
Hi, we are testing voltage regulator equipment for tranformers, and we can read correctly through IEC61850 the tap position and other status signals (Auto/Man, Local/Remote). The problem comes when we want to execute commands (raise tap and lower tap).
Status: INVALID , NT_870 but reading values
Hi all I have one substation with SIPROTEC4 and thiese SIPROTECS are connected to AK-1703 and I am reading values from AK-1703 with AK-driver. All the variables are ok without currents, they have status : INVALID,COT0,COT1,NT_870 but i can read the values
Regarding to SOE of IEC 61850
Hi All, using a zenon7.10 SP0. Regarding to SOE of IEC 61850, zenon can communicate a device via report type - IEC61850. so, i can get any data (timestamp, value etc.)from device. by the way, I have to create a SOE system that i have not done before.
IEC60870 Einzelmeldung
Hallo Ich verwende Zenon 7 SP0 B7192 und den IEC60870 Treiber (IEC870). Aktuell versuche ich eine Datenerfassungseinheit von Siemens einzubinden (TM1703mic). Es funktioniert auf soweit bei (T30 & T36 in Empfangsrichtung). Diese Datenerfassungseinheit
Befehlsgabe
Hallo Würde eine Anleitung zur Projektierung der Befehlsgabe unter EE 7.10 benötigen. Danke Mfg This is a migrated post! Originally posted on 25.01.2014 by user garfield.79. Please be aware that information can be outdated.
Unhanded Exception
Hi I have a problem with my project. Now I can not access to Function/Script. It always display "Unhanded Exception" ,, log the even to zenon32.txt and exit software But the function still work normally in runtime. Could somebody give me some advise?
Problem with IEC 61850 reports
Hello, i'm trying to configure the 61850 driver on Zenon to receive and update a variable using a report from the 61850 server. The report is correctly configured on the server because i'm able to see it with IED scout. The report consists in a dataset
Opc Com Dcom Tunnel!!!!!
HELLO!!! Base licence ZENON EE SERVER 7.10 included OPC client? If i need connect to remote opc server on PS in LAN. How i do that? THANKS This is a migrated post! Originally posted on 04.12.2013 by user denis1706. Please be aware that information can
Runtime Exceeded
Hello Support, During Testing in the Field in one of my Project, I have Received the following Message(in the Snap) during Command Processing. Although , I am able to control further, but the RED Square will be present until I restart my Runtime Again.
Events using IEC61850 driver
Hello Support, Following is the requirement of one of our customers, please advise.. There is a need to see events that happen in less than 1 second time by normal IEC61850 polliing, the events only appear after 1 or 2 seconds duration but it is requested
Buffered reports and redundancy
Hello I have one running system with Zenon and 61850 IEDs with Buffered reports. I am installing second server and runtime and the idea is to have redundant servers. I am wondering about the correct configuration for BRCB. Is is enough to add additional
Re: Buffer/Unbuffer report
Hi Roberto/Mark I am facing similar BRCB event issues with GE F650, could you please share the solution carried out. Regards, Anoop MV This is a migrated post! Originally posted on 19.10.2013 by user mail2anoopmv. Please be aware that information can
IEC 60780 Trend problem
We use Zenon 7.00 and IEC 60780. As we lost the communication between Zenon and RTU. Zenon detect that only after 20-25 seconds. In this case when we draw historical trend, we have have that Zenon draw same lines even when the connection was lost, how
IEC 60870-5-104-Time stamp problem
E.g. For a variable i use Type T30 single point with CP56Time2a and i need to show change in CEL. When the value change , i see the result in CEL, but i have one hour difference. With this format, i can't know if it's winter time or not. how i can resolve
Report generator
Hi , I want to make energy report and for that reason I need to know what is the consumption for one hour for example. I make following archive and take MIN and MAX value for this hour but I want to use just the difference between them (MAX - MIN) for
Button with dynamical functions
Hi, I have one substation with 30 siprotec devices, i need to have a button which acknowledge alarm and in the same time resets the leds only of the device which has TRIP (for example), and when I acknowage another alarm with this button from another
Passing ALC color between projects of multiserver model
Hello, colleagues! We use 6.51. In our master project we need to get lines color of child projects. We think about using aliases for this needs, but they work only inside one project. The another way we think is to use VBA to get line ALC color, move
Passing ALC color between projects of multiserver model
Hello, colleagues! We use 6.51. In our master project we need to get lines color of child projects. We think about using aliases for this needs, but they work only inside one project. The another way we think is to use VBA to get line ALC color, move
Graphic Reports
Hello, We need to build a special report on daily values of active power, reactive power and total power. This report must be based on archive data, but we need to represent it graphically, not in tabular style. How can we do it? Can we do it via Trends
Sicam 230
Hi, I am using SICAM 230 in demo mode and I have two questions. Why I see very limited number of drivers even I can see the EXE file of the other drivers in SICAM 230 7.00 SP0 installation folder? I can not find any Automatic Line Coloring (ALC) functionality
IEC61850 to Communicate
hi all, thanks for your kindly cooperation. zenon 7.10 supervisor with IEC 61850 driver. Regarding a driver of IEC850, there are two type to communiate with Elec device. polling and report type . when the read a data via polling type , it has a interval
Double Point Status Breaker & ALC
Hello Support, I have a breaker whose open/close status are from 2 different Variable(Bool type). I am getting open(01) and Close(10) position correct and colour is getting transferred to line across Breaker(ALC Func Type - Switch). But when variable
IEC61850 - Problems with Reports
Dear colleagues I have the Problem the some Signals from a Siemens Protection Device get lost, when the are changing their values fast (0-1-0). When the Signals are delayed/extended they arrive in Zenon. All these Signals are in a Report, the Report are
Reset State Bit
Hi, I have a variable that has the TIMEOUT State bit set due to the Watchdog timer in the Command functionality. Is there any way to reset this bit manually ? Cheers Rob This is a migrated post! Originally posted on 26.06.2013 by user rob.machin@capula.co.uk.
Response variable changing disables Action Buttons
Hello, colleagues! We use in our project command dialogs and some configured commands. We noticed that if we open command window and then response variable is changed without command both Action1 and Action2 buttons changed its state to disabled. This
IEC 60870-5-104 Driver
Hi, We are using Zenon 7.00 with IEC 60870-5-104 Driver,T01 single-point information(reading Status),T45 single command(sending a command). My question: if we lose the connection between RTU(PLC) and Zenon SCADA. After, we made some manipulation(send
Event Register - export options
Dear Sirs, I apologies if I ask obvious questions. I am coming from SIMATIC WinCC World and I am not experienced (yet) zenon user. We are at quotation stage with one of our clients. On it's site SICAM 230 SCADA software (which I believe it is zenon v6.51)
Remote transport
Hi, I try to transfer for the first time my Zenon project from development PC to another PC which has only runtime installed, but I do not have icon "transfer all runtime files". I only have "transfer changed runtime files" icon. Now some symbols are
Standard Edition Commands
Hi, is there any possibility to create and send single command (for example, OPEN/CLOSE to circuit breaker), from "Zenon Standard Edition"? Here I dont have "Command" option in Project tree manager. I know that in Energy edition such possibility exists,
PROFIBUS commands
Hello, does anyone have experience with PROFIBUS commands? How to make pulse commands for PROFIBUS?(example) Thank you in advance. This is a migrated post! Originally posted on 29.04.2013 by user jroht. Please be aware that information can be outdat
PROFIBUS commands
Hello, does anyone have experience with PROFIBUS commands? How to make pulse commands for PROFIBUS?(example) Thank you in advance. This is a migrated post! Originally posted on 29.04.2013 by user jroht. Please be aware that information can be outdat
Alarm screening
Hi, this is my problem... I have 3 buttons for 3 units. In every unit I have about 50 alarms. Button should flash in red color when new alarm in specific unit occur. If alarm is still active after being acknowledged in AML, button should stop flashing,
Button flashing
Hi, how to make a button that will start to flash when a new alarm appears? There are more then 100 alarms that trigger button flashing. What is easiest way to do it? Regards. This is a migrated post! Originally posted on 19.04.2013 by user tihomir. Please
acknowledgment alarms
acknowledgment alarms Dear Support, I have a little problem with the AML screen. IÂ've been working with it without any problem, but I donÂ't know how, now, the alarms can't be acknowledged or deleted. the buttons are desactivated. the alarms came from
Next Page