Sicam 230

Sicam 230

Hi, I have two AK1703 and two SICAM 230 devices on network. The first network consists of AK1703 and SICAM 230 that receive information from one group of relays via IEC61850. 2nd network consists of AK1703 and SICAM 230 that receive information from another group of relays via IEC61850. Both AK1703 act as gateways and exchange information via IEC104 protocol. Both SICAM230 receive information from another system via IEC104. When signals come from 1st group of relays they appear in 1st SICAM230 ( via 61850) and 2nd SICAM230 (via IEC104). That is ok. When signals come from 2nd group of relays they appear in 2nd SICAM230 ( via 61850) and they not appear in 2nd SICAM230 (via IEC104). So, at the moment I have good exchange of information only in one direction. Here are GW1703 file from both SICAM230. IP addresses are ok. I dont know what else to check. In both GW1703 files 3rd line is: TOPOLOGY_OWN_SYSTEM=1,1 (what that means, how to find that info in RTU project ?) In both GW1703 files, LAN definition 2nd line is: TOPOLOGY_CONN_SYSTEM=1,10 (what that means, how to find that info in RTU project ?) Regards.

This is a migrated post! Originally posted on 26.05.2014 by user tihomir. Please be aware that information can be outdated.

    Disclaimer

    This document governs the use of our Community Forum. By registering and using the platform, you accept these conditions.

    The COPA-DATA Community Forum serves to encourage the exchange of information and experience about the zenon software between forum users respectively zenon users.

    Please mind that any published information on the Community Forum is the subjective opinion and view based on the experience and the level of knowledge of the author. COPA-DATA does not overtake any responsibility for the content and the accuracy of the shared information.

    Users of the Community Forum are encouraged to share only well-founded experiences and to point out any risks associated with the implementation of proposed solutions to problems. COPA-DATA at its absolute discretion, reserves the right to moderate the forum. In this connection COPA-DATA may remove any information containing false facts, potentially dangerous solutions, bad language or content that may insult, degrade or discriminate others. COPA-DATA may block a non-complying user from forum access if the user violated this provision.

    COPA-DATA reserves the right to change this document from time to time at own discretion.


    Ing. Punzenberger COPA-DATA GmbH
    Karolingerstraße 7b · 5020 Salzburg · Austria
    www.copadata.com