Recent Topics
Zugriff mit Hilfe von VBA auf die Aktualwerte eines Datenbausteins S7
Hallo, ich möchte mit Hilfe von VBA auf die Aktualwerte eines Dautenbausteins einer S7-SPS zugreifen und diese in einer Datei abspeichern. Mit Problem dabei ist wie kann ich im VBA-Editors auf die einzlenen Speicherbereiche des DB`s zu greifen und diese
change font size of ActiveX ListBox
Hi there! I use a ActiveX-Element "Microsoft Forms 2.0 ListBox-Control" on my screen and add some entries to it. But unfortunately the fontsize is much too small. How can I set the font size of the control? It doesn't matter if at runtime or design mode.
Datenaustausch zwischen V6.50 und V7.00
Hallo, ich habe ein Netzwerk mit Server, Clients und Prozesswerten aus Hardware-SPS. Als Runtime läuft ZenOn Version 6.50 SP0 Build1. In dieses Netzwerk wird jetzt eine neue Anlage integriert mit SPS/Server/Clients in ZenOn V 7.00 SP0 Build2. (alles Windows
Communication Error
Dear Support I have two redundant servers (primary and standby) in control room that receiving data from 5 workstations at substation level with IEC 61850 protocol .Server communicate with DCS system via OPC protocol .I received communication error on
Password in Worspace
Hello, Whenever I am opening a workspace or creating a backup, i am prompting to enter user name and password. How can I disable this option? I am using zenon 7. Thanks This is a migrated post! Originally posted on 05.03.2013 by user salmanhassan2. Please
VstaIDE Error: Unable to create macro project...
Hallo! Ich habe ein Problem beim –ffnen der VSTA-Umgebung für ein ProjectAddin. Wenn ich in einem Projekt unter Programmierschnittstellen -> VSTA -> VSTA-Editor mit ProjectAddin öffnen... auswähle bekomme ich folgende Fehlermeldung: [INDENT] VstaIDE Error:
VstaIDE Error: Unable to create macro project...
Hallo! Ich habe ein Problem beim –ffnen der VSTA-Umgebung für ein ProjectAddin. Wenn ich in einem Projekt unter Programmierschnittstellen -> VSTA -> VSTA-Editor mit ProjectAddin öffnen... auswähle bekomme ich folgende Fehlermeldung: [INDENT] VstaIDE Error:
sichtbar nicht gleich sichtbar?
Hallo, habe gerade mit einem sehr merkwürdigen Phänomen zu kämpfen: ich habe mehrere Elemente, die in Abhängigkeit derselben Variablen sichtbar oder unsichtbar sein sollen. Die Sichtbarkeit hängt nicht vom Grenzwert ab, sondern ist fest definiert: wenn
Archivkonfiguration editor spalten
Hallo Mark. „hnliches Problem ist es bei Archivsortierung. Sortiert wird nach Kurzbezeichnung und nicht nach Name. Da die Archive nacheinander entstehen, können wir zwar Reservierung für Kurzbezeichnung vornehmen. Diese Kurzbezeichnung ist nachträglich
Archivkonfiguration
Hallo, Kann man einfach nicht nur leere Archive mit allen Eigenschaften ohne Variablen anlegen/definieren ? Welche Variablen welchem Archiv zugeordnet werden könnte man direkt in Variablendefinition (csv. Import/Export inbegriffen) hinzufügen. Im Archiv
Multiple Variables assignment in Straton
Hi Support, I need to know if multiple assignment to variables is possible (in one line) in Straton? If yes, what is the syntax? I am trying like below but receiving compilation error: newVar := newVar1 := newVar2; The above is not working! :confused:
Programm access to child project in multi-server systems in runtime
Hello, colleagues! Now we check multy-server system functionality in context of program access to child project data on up-level project. We found way to acces of child-project archive data in runtime (function archive.ArchiveVariables().ItemByIdEx).
TREND Änderung der Defaulteinstellung
Hallo, wie kann ich anstatt default 'Variablename' die 'Kennung' der Variable im Kurveneinstellung definieren. Evtl. ist auch substring möglich ? Beispiel: Variablename =G40_008RLT19AA01.OS1 Kennung=G40_0/08/RLT19 @œberspannungsschutz (De-)Aktivierung
Text-to-Speech and Windows 7 64 Bit
If the voices Klara and Reiner does not work on a windows 7 64 bit environment please use the following workaround: (this effect occurs because of a failure of microsoft) With the following link you can find a description regarding that effect: post 7
Process gateway - Backup
Hi, I wanted to know if there is a different procedure to take backup of the the configuration of process gateway? or does the configuration gets stored while taking the project backup? i am using zenon 7. I had configured a few tags in process gateway(
Neues bei der Monitorverwaltung?
Hallo! Ich habe ja schon ein paar Fragen zur Monitorverwaltung hier im Forum gestellt... Jetzt würde mich interessieren ob sich in den letzten Versionen dazu etwas getan hat? Ein paar Ansätze dazu waren ja zu erkennen: http://www.copadata.com/forums/showpost.php?p=1604&postcount=2
Beckhoff TwinCat NG driver -> Red square
I am having the set of machinery running at the downfloor. I would like to create a summary diagnostic screen which will give a brief owerview of the statuses of all machines. Each machine runs at Beckhoff1020 CX and having dedicated IP adress. Below
Zweite Zeitachse
Hat sich erledigt, manchmal sieht man den Wald vor lauter Bäumen nicht... Tobi This is a migrated post! Originally posted on 25.02.2013 by user zero. Please be aware that information can be outdated.
How to display CEL/AML time column in 24 hour format
Hi guys, How do you change the time format in the CEL/AML time column from 12 hour format to 24 hour format? Best regards, Justin This is a migrated post! Originally posted on 23.02.2013 by user jjplaw. Please be aware that information can be outdat
WAGO PLC - on Zenon 7 - what drivers are needed?
Dear forum We use Zenon 7 to visualise our building automation systems. It mainly consists of Siemens S7 PLCs and and a number of KNX installations. One of the cooling system, however, comes with a WAGO PLC, 750-842. CoDeSys 2.3.9.7 was used to program
Sprachumschaltung im ReportViewer
Hallo, wie können die Texte in einer rdl Datei des Report Viewers mehrsprachig gestaltet werden. Ich habe gesehen, dass es bei der Sprachumschaltfunktion die Möglichkeit gibt, eine Report Definitionsdatei zu definieren. Kann hier eine rdl Datei ausgewählt
Texte in Tabellen im ReportViewer
Hallo, ich möchte in einem Bericht (Report Viewer) u.a. eine Tabelle darstellen. Diese Tabelle besteht im wesentlichen aus 2 Spalten (Bezeichnung, Wert). Die Daten werden dzt. in einem Archiv bereitgestellt. Nun kann ich eine Tabelle autom. mit den Daten
Read Date & Time from Time Attribute on IEC61850
Hello, I would like to read date and time from variable and display it in numeric field.I am using IEC61850 driver. I have tried to do this by mapping the time attribute of that specific variable. When I import the variable in zenOn the data type it is
Screen Timer
Hi All, How do I create an on-screen timer that will count down from 90 seconds? Cheers, Rob This is a migrated post! Originally posted on 20.02.2013 by user rob.machin@capula.co.uk. Please be aware that information can be outdated.
Online Printing
Hi All, I've edited the ALARM.FRM file to include the @ACLASSNAME keyword so that the Alarm Class name should be printed. However, when the Alarm List is printed this field is blank. I've changed this keyword to @ACLASSNR and the Class number is printed.
Diagviewer - "Hijack" values
Hi Im debugging a driver and are using the DiagViewer to obtain debugging information. I would like to get a custom view of the data (there is a lot of data). Is there a way where I can connect to DiagViewer with a .net program and be notified when a
Writing Cell values from Reports to Internal Variables
Dear Support, I am trying to write some cell values from a Report to Internal Variables, but it seems like not happening. I am using the below function: = variablerw('variablename', 'value', 'read') I have tried by writing 'write' instead of 'read', but
Unit conversion - Single unit
Hi I'm trying to do unit conversion in zenon 6.51. I have created a few units, and created a unit conversion function. However, this way changes ALL the created units, so if you create a button that changes Degree C to Degree F and afterwards presses
Bargraf-Eigenschaften in Symbol freigeben
Hallo, ich wollte ein Symbol erstellen, das u.a. einen Bargraf enthält. Die Variable, die den Anzeigewert für den Bargraf liefert, sollte über "Eigenschaft freigeben" freigegeben werden. Der Bargraf selbst soll seinen Anzeigebereich nicht über den Wertebereich
General Report
Hello! I wanted to ask a question about the tool Report. At the moment we are doing some tables for each Lines (for example, one table for the line W1G, one table for line signals W2G etc). We have to add in archive all the signals that need to be in
DragDrop VBA macro never executes
Hello, I have a problem that is a DragDrop event and linked VBA macro never gets executed when I try to move any of my Combined Elements with a mouse. Combined Element's set as 'Graphical file or system symbol' or smth like this. I doubt this is important,
Issue with Loading the last used Workspace and Project
Dear Support, I am using Zenon Energy Edition, 6.51 SP0. The problem that I am facing is stated below: I create a Workspace and a Project in Zenon Editor and start doing the Engineering. Before exiting the Editor, I create all Runtime files for the Project.
Save CEL/AML data options
Dear guys, please advise what is differecnces in the "Save CEL/AML data" option of the project settings? I am having project in Zenon 6.51 SP0 and those options are: - Ringbuffer and historic data - only ringbuffer - Default I faced with the issue that
X-Axis configuration in Report Builder
Hi, I have to generate a report of a welding process. Therefore I use ZenOn 7 with Report Viewer. The parameters, I am interested in, will be stored within archive server. Now, I use Report Builder to create and configure the chart. The chart should display
Zenon 6.51 RT, update variable Range
Hi We are doing some unit scaling in 6.51 by editing the RangeMin and RangeMax. It has been working fine in 6.22, but in 6.51 the change in value is not displayed in Zenons "Numerical inputs". The value is scaled correctly, but not shown. It seems like
Zenon Compatibilty
Hi, I would like to know if zenon performance is dependant on whether the machine is 32bit or 64 bit? I tested my project in win 7 which is a 32 bit and also in win 2008 server R2 which is 64bit. In 32bit it works fine but in 64bit it is very slow and
Gleicher Wizard in zenon 6 und zenon 7
Hallo zusammen, bei uns laufen verschiedene selbstprogrammierte Wizards, die für zenon 6.51 programmiert wurden. Wir wollen auf Zenon 7 umsteigen, in der Zwischenzeit wollen wir aber die gleichen WizardÂ's ausführen, in Zenon 6.51 und Zenon 7. Beim Ausführen
Editing Symbols from project symbols Library via VBA
Hi all, I'm new with zenon. I have simple question is it possible edit symbols from symbol library via VBA. Is it possible to access them via VBA like pictures ? Thanks This is a migrated post! Originally posted on 12.02.2013 by user rrkobra. Please be
Process gateway(Modbus)
Hi, in process gateway of zenon(7.0), i have noticed that there is only option for setting holding register offset. But i want to configure for read input register in process gateway(function 02h). How do i make this possible? This is a migrated post!
Fanuc Robot data exchange protocol
I would like to know if Zenon 6.50 SP0 BUILD8 , support fanuc robot controller data exchange protocol. Robot supplier told me the protocol is called SNPX or SRTP over ethernet or is also known as "fanuc" data exchange protocol. I haven't seen this type
Next Page