Recent Topics
Power management system
I am attending to use Zenon energy edition for management of a power pant. Power plant includes 5 turbo-generators. I reviewed EMS module in Zenon and could not find any function related to active power sharing, reactive power sharing, Generator control,
IEC 101 - End of Initialization
Dear Supporter, I could not connect zenon IEC101 Process Gateway to Test Harness (ver. 3.7.0.0) successfully. According to attached log files, the connection does not established correctly because Zenon does not reset the Remote Link at the start up and
combinatorial logic
Hello all the world Firstly thank you for this forum; this really is a very good guide for beginners. Secondly; thank you for all the moderator that meets everyone without exclusive * + now I have variable .A and B and C; and I want to do the arithmetic
COM Exception
Hallo liebe Community, ich bekomme bei einem unserer Rechner folgenden Fehler wenn ich mich versuche über die COM Schnittstelle zu verbinden: System.Runtime.InteropServices.COMException (0x80080005): Retrieving the COM class factory for component with
Dynamischer Grenzwertext in Rema
Hallo, ich möchte das in einem Textfeld die aktuelle Schrittnummer einer Schrittkette angezeigt wird. Die Variable hierzu lautet : iSchrittnummer Da in diesem Textfeld noch andere Meldungen ausgegeben werden, habe ich eine Reaktionsmatrix angelegt. In
delay in redundancy
Hello , I’ m glad to tell you that redundancy had finally worked, but I have some problems with delays response, because when I disconnect the primary server, I must wait more than 30 seconds to visualize my states. In other hand, when I disconnect
Path.Combine
Hallo Zusammen ich möchte die Methode Path.Combine() ausführen. Combine wird aber nicht im IntelliSense angeboten. System.IO ist eingebunde This is a migrated post! Originally posted on 26.06.2015 by user armins. Please be aware that information can be
Export eines Archives fct Export Archive
Hallo, ich habe ein Bild Typ Archivnachbearbeitung mit Taste ExportData die mit Standartfunktion Export Archive verknüpft ist gebildet. Ich verwende Archivfilter, damit ich nur bestimmte Variablen ansehen kann, also nicht komplette Datensätze. Das funktioniert
redundancy problem in server
hello everyone I have this architecture please check this setting. and tell me is that it is correct or not thank you. This is a migrated post! Originally posted on 25.06.2015 by user hajjsaid99. Please be aware that information can be outdated.
N_UPDATE Statusbit erkennen
Guten Tag, ich versuche eine nicht aktualisierte Variable auf folgende Weise zu erkennen: t_invalid_Var:=VSIGETBIT( E7_2, 29 ); // Logic Es funktioniert leider nicht. Kennt jemand eine Lösung? Danke. This is a migrated post! Originally posted on 25.06.2015
Changing Variable Name in Zenon Logic
Hello, I am using Zenon Variables in Zenon Logic. I wrote some Programs using those Variables by dragging and dropping them and every thing is working. The only problem is when a Variable name changes in Zenon it also changes in the Variable declaration
Alarmliste Export - Pfad einstellbar
Hallo, da es nicht möglich ist den Export-Pfad einer Alarmliste zur Runtime bzw. am WebClient auszuwählen, habe ich mir gedacht dass ich es in VBA schreibe, nur leider treten dort auch Probleme auf. 1. Ist es wirklich nirgends möglich den Export-Pfad
RT zenOn v7.11 - WebClient v7.20 Fehler
Hallo, ich habe ein Problem mit der neuen zenOn Version 7.20 Build >17k. WebClient: Ich habe auf meinem Rechner den WebClient geupdated, es wird beim öffnen meines Projekts auch der richtige WebClient geladen. Runtime: v7.11 BUILD >18k WebClient: v7.20
Rechtsklick Variablenanzeige mit... in Runtime wählen
Hallo! In den Projekteigenschaften/Graphische Ausprägung/Runtime allgemein/Variablenanzeige mit... wird ja festgelegt was bei einem Rechtsklick und Halten auf verschiedene Elemente für Informationen angezeigt werden. Das nutzen bei uns intensiv Mitarbeiter
Trend-Element
Hallo, gibt es eine Möglichkeit bei dem Trend-Element (NICHT der erweiterte Trend !!) Kurven dynamisch auszuschalten ? z.B. wird das Bild zum ersten mal aufgerufen sollen 2 der 6 Kurven dargestellt werden, wird das Bild nochmal aufgerufen sollen 4 der
Rema-Object einem Limit zuordnen...
Hallo, wie kann ich eine zuvor erstellte Reaktionsmatrix (Rema) einem Limit zuordnen? Es geht genauer um das Belegen des Feldes "Rema" im Reiter "Limits". Danke. This is a migrated post! Originally posted on 15.06.2015 by user nollh. Please be aware that
Zugriff auf Farbpalette
Hallo, ich möchte einem State einer Reaktionsmatrix einen Farbwert zuweisen. Im globalen Projekt sind unter Farbpalette bereits einige Farben angelegt. Wie kann ich aus C# heraus auf diese Farbpalette zugreifen? Die Zuweisung mittels vState.Color = Color.Red;
Recieving Goose on Raspberry Pi (Straton)
Hi, I am trying to configure my straton running on Raspberry Pi to recieve goose. however, I get the following error (see attached file). However, i dont know why it says "MMS", since I am using Goose. Anyone got a clue? Best, Jonas This is a migrated
Alarm taucht auf, obwohl nicht angewählt
Guten Tag, ich habe eine Meldung in einer Struckturvariable. "In Alarm Message List" ist nicht aktiv. Die Meldung ist aber im Bild "Alarme" (Typ "Alarm Message List") zu sehen. Welche Einstellungen sind bei mir falsch? Danke für die Hilfe. This is a migrated
iec850.exe error
Hi! In diadnosis viewer i have some error with my iec850 driver: e:\builds\1_zenon\zenon\zenon711sp0_build\source\zenon drivers\drvkit\DrvKit.cpp Value image not aligned! Start without aligned values. Timeout is 120000 ms. And after this error iec850.exe
Anlegen einer Reaktionsmatrix
Hallo, ich suche momentan die Möglichkeit aus C# einen Eintrag in die Reaktionsmatrix zu bewerkstelligen. Leider bisher ohne Erfolg, d.h. ich finde das entsprechende Objekt nicht. Welches Objekt muss ich denn verwenden? Danke. This is a migrated post!
Use of Zénon Operator ?
I want to develop a module based on Z©non but i wonder i should use Supervisor or Operator. In fact, this module should communicate through Modbus TCP with 2 other Modbus servers and shall implement himself a Modbus Server. Can i use Z©non Operator for
variables external use
Hi support I changed driver mode to ''simulation - programed" and created simulation project. Ofter that I wrote some logic in ST and in runtime it worked OK. but I want to use variables form another driver. I enabled "externally visible" for those variables
if Anweisung funktioniert nicht
Hallo, kann mir jemand sagen, warum die folgende Anweisung „false“ ergibt, obwohl die zwei Variablen den gleichen Wert haben (auch den gleichen Datentyp): C# Code: if (obZ_Par_Var.Item("Zellen_Parameter_CmbBox_Sel_Item").get_Value(0) == obZ_Par_Var.Item("Trend1_CmbBox_Sel_Item").get_Value(0))
Upgrade from zenon 6.50 tto zenon 7.2
Hi We want to upgrade our system / database from 6.50 to 7.20. We will upgrade OS system from window server 2003 to 2008 64bit for extension memory, SQL from 2005 to 2012. But we still concert that zenon database upgrade from 6.50 to 7.20. Do we need
Export DataSet Using C#
Hi, I am new in web development. I have little problem. Could you help me please? For your information, I'm using asphostportal.com hosting and I have windows account that supports .NET 4.5. Is there any way or codes for export dataset or datatabe to
NPAPI-PlugIn und Google Chrome
Hallo, Google Chrome unterstützt ab Version 42 keine NPAPI-Plug-Ins mehr. Dies betrifft wohl auch den Webclient von Zenon. Weiß jemand, ob es hier in Zukunft einen anderen Webclient bzw. eine Lösung zur weiteren Unterstützung des Browsers Google Chrome
Array and licensed I/O variables
Hi, quite new in this technology...i have to store an array of 5000 float through modbus driver. My question : does this count as 5000 licensed variables or is it a way so it counts as one variable (the array in fact) Thanks ! This is a migrated post!
Wolf-SPS KLM-L mit BACnet anbinden
Hallo! Wir möchten eine Lüftungsanlage mit einer KLM-L SPS über Ethernet (Firmen-Intranet) auf unsere GLT anbinden (Zenon-Supervisor V7.11). Die dokumentierte Schnittstelle ist BACnet. Dafür soll man nur eine Karte nachrüsten. Da ich keine Erfahrung mit
packing 16 bool variable to one 16 bit interger variable
Hi, In our project , we are sending data to DCS control system through process gateway MODBUS , in this method each address of modbus can carry only one variable , so in the 16 bit we are effectively using only one bit and rest of the 15 bit are unused.
Alarm Handling i and variables in Subprojects
Hello I have these Project i am working on, the project have an integrator and 4 Sub projects, each sub project runs on a CE platform. The variables that each sub project reads are created on each sub project and read by the Server which runs the integrator.
WPF Element - cosphi
Hi everybody, Except the cosphi element, i can working WPF... Properties of cosphi element are different pursuant to other element. How can i use it? where can i entry PF variable.. Best Regards, This is a migrated post! Originally posted on 27.05.2015
Tastaturlayout in Runtime versehentlich verstellt
Hallo zusammen, wie um alles in der Welt bekommt man es denn hin, in der zenon runtime das Tastaturlayout auf eine andere Sprache (in meinem Fall vermutlich englisch) umzustellen, wenn man hierfür weder eine Funktion gebaut hat noch ein Tastenkürzel irgendwo
how to change build version
Dear support I have build98 with zenozenon6,51...I need to change it asbuild 0...kindly send me a procedure how to do it This is a migrated post! Originally posted on 25.05.2015 by user tanveerali. Please be aware that information can be outdated.
New AML record
Hi! How can i add new record to AML list? I know, how to add it to CEL: thisProject.Cel().WriteCelString , but need AML This is a migrated post! Originally posted on 23.05.2015 by user diemon. Please be aware that information can be outdated.
Value Calculation on Real numbers
I am have some issue with some values in PLC not being read from Zenon on a graphic. The varible diagnostic window shows these values with no status instead of spontanious. Can this be somehow related to the value calculation? The default in Zenon is
Lizensierung
Guten Morgen, wie sieht eigentlich die Lizensierungs Politik bei Zenon aus? Gibt es noch die Möglichkeit neue Lizenzen oder „nderungen an bestehenden Lizenzen, z.B. Variablenausbau für 6.51 oder ältere Versionen zu bekommen? Jürgen Berger This is a migrated
SBO in iec 61850
Hi all I have such problem: on the raley I'm using the sbo-with-enhanced-security and DPC commands are not executing. I also enabled the "select before operate" checkbox in the "*Pos/Oper.ctlVal[CO]" properties. what would be reason? thanks This is a
Zenon 6.51 massage control and email fetures
Dear COPA data support , I am using zenon v6.51 SCADA , wanted the do massage control for sending sms and email . any one can help me about ....How i can do it ?? Thanks in Advance.. This is a migrated post! Originally posted on 21.05.2015 by user vivek.
Math Drv. no modulo operation
Hello to all! Is it possible to use MOD operation in math. variables? I do not see this under arithmetics...:confused: I have tried for example X01%60 which is OK but does not give me the rest of the variable. Is this even possible with this driver without
Next Page