Recent Topics
Role of Execute Repair in IMM
Hello Team, I have made a demo project and add IMM(Industrial Maintenance Manager) in it. I have used zenon internal variable as a switching counter variable. Sequence for operation performance: 1) Configure device. 2) In maintenance of device assign
Ctrl+Alt+R and Ctrl+Alt+D Shortcuts not working
Hello, I am using zenon 7.60, From my editor i unable to open RT folder and Data folder using the Shortcuts Ctrl+Alt+R and Ctrl+Alt+D respectively. kindly advice. Regards SwamyP This is a migrated post! Originally posted on 24.07.2019 by user swamy.panakala@gmail.com.
Zenon Logic --> S7 300 Connection
Hi everyone! I have just a short question to Zenon logic. So, we make a test, we would like to communicate with S7 300 PLC, but direct with Zenon Logic (we have a soft PLC and our aim is a PN connection). By SCADA site operate the communication well,
Historian evacuation to Microsoft Azure
Hi support, I have a question, we are implementing a SCADA for our end-user. In this instance, they need their licenses are prepared to evacuate historian to Microsoft Azure. The implementation will be performed in an other moment. So, in this case, we
Linking Users to corporate Domain account
Hi, Is it possible to use the corporate domain accounts for user accounts in Zenon Energy Edition. If possible please explain how to do it. This is a migrated post! Originally posted on 18.07.2019 by user Xavier. Please be aware that information can be
Numeric value with decimals
Hi, I am mapping a double variable imported from an OPC-UA server on a 'Numeric value' element. However, I only see the integer part, without any decimal values. On the properties of the 'Numeric value' element, I can't find where to configure the number
HMI Panel
Hello all, I have been working with zenon Energy Edition to try and create an HMI panel for a substation. I was wondering if there are any startup guides or manuals for beginners like me available. If you could let me know, I'd be grateful. This is a
SystemModel von einen Bild in der Runtime auslesen
Hallo! Ich suche eine Möglichkeit die einem Bild zugeordneten Systemmodelleinträge in einem RT Addin auszulesen. GetDynamicProperty ist bei IScreen in der Runtime wohl nicht verfügbar... Hat jemand eine Idee wie man an die Info in der Runtime trotzdem
Message Control
Hallo leute, Ich habe eine problem mit Message control , ich projektiere auf einem Edito 7.0 SP00 Build 25. Ich habe zwei runtime stationen . Eine hat hat die runtime Version 6.50 und der andere hat die Version 7.0 Auf das Projekt mit runtime 6.50 wird
Reportfunktionen
Hallo Leute , Ich habe zwei frage in Richtung Reportsfunktionen. 1-Gibt keine Mathemtishe reportfunktionen ( Subtrahieren) ? Ich habe alle funktionen durchgelesen , aber ich habe keine gefunden, die Substraktion werte macht. 2-Wie kann ich einen über
AddIn build fails using SQLite DLLs
Hi to all, maybe this problem is a bit special, but here we go: We have several AddIns using additional libraries, such as SAP (sapnco connector using sapnco.dll) and everything is working great. But when I try to use the SQLite Package, there is always
Disturbance records (COMTRAD)E IEC 61850
I have several IEDs that I need to read out cometrade files automatically when a new record is created.I will want to use the function file transfer in IEC-61850. Zenon EE 10 supports viewing of cometrade files. But is the predefined script to get the
Ãœbergabe von Parametern vom Element an AddInFramework C#
Hallo, ich habe in meinem Zenon Projekt viel mit VBA gearbeitet. Wir wollen aus vielen Gründen jetzt von VBA weg. Deshalb habe ich begonnen meine Skripte ins Add-In Framework (C#) um zu ziehen. Jetzt stehe ich vor dem Problem, das ich viele Makros habe
OPC communication issue
Hello, I am using Zenon 7.60 build 56016. I am trying to communicate with opc server, so I have added opc UA client driver. I am able to browse opc server variables but variable values are not updating. There are no red dots on screen which indicates
LON Treiber - aktueller Stand
Hallo zusammen, inzwischen ist ja zenon Version 8.10 erhältlich. Ist da inzwischen auch der LON-Treiber aktualisiert, sodass man auch OpenLNS anbinden kann? - Ich würde an dieser Stelle nur allzu gerne von dem alten OPC-Server wegkommen, der seit Windows
Nachricht an Netzwerk-rechner senden
Hallo zusammen, unser zenon-Projekt läuft auf einem Server, der in ein größeres Netzwerk eingebunden ist. Auf ein paar wenigen Rechnern in diesem Netzwerk sind webclients installiert, über die wir normalerweise das Projekt nutzen. Jetzt kam die Idee auf,
Zenon to SQL
Hi, First of all I am new to Zenon and Interested to learn more about the functionality, while working with zenon I am stuck in some points please share valuable advises for the following points 1.Currently I have configured historian with 15 variables
How to get LanguageTable in runtime
Hi there, Is there some way to get LanguageTable in Runtime? I have tried few thinks, but no luck so far. Any tip? My AddIn project is "IProjectServiceExtension". ILanguageTable languageTable = m_Project.Parent.Parent.Workspace.ActiveProject.LanguageTable;
How change the state of variable in AddIn Runtime service
Hi copa-data, (working with zenon 8.0, AddIn Runtime service) i am trying to change the state of variable, specifically the status bit 9 REVISION. I found in documentation one method of IVariable to set a value with lowerState (http://onlinehelp.copadata.com/help/760/addin/html/Variable-IVariable.htm)
Login notification
Hello, I have created two users, engineer and operator for login.. How do i know that if any of this operator has logged in? Is that information is stored anywhere so that i can provide visual indication for that? This is a migrated post! Originally posted
Red dot on the variables display screen
In one of my project, I am using zenon operator scada which is communicating over ethernet with two AC-500 PM-583 PLCs in redundant configuration. I am getting red dot on variable displays sometimes for some of the variables and the communication freezes..After
Red blocks
When i navigate in the SCADA-application it cost time to load some objects. This shown bij a red figure next tot the icon. Is there a way to speed up Zenon? This is a migrated post! Originally posted on 25.06.2019 by user JohnBar. Please be aware that
Remote desktop fehler Projekt nachladen
Hallo, Ich benutzte eine Zenon 7.00 SPS 0 Build25 Der editor ist bei mir im Büro, wenn ich mit Remote-desktop/projekt nachladen benutzt, erschein fehler (siehe anhang) . ich muss nur der Runtime neue Starten. weiss jemand woran kann das liegen oder wie
Alarme Wiederholung
hallo, Wenn eine Alarm ausgelöst ist , bekomme ich jede 5 minuten die gleiche Meldung per mail. Gibt es eine möglichkeit so einzustellen, dass ich nur einmal oder nach einer von mir definieten Intervall bekomme ? Mein Postfach its schnelel voll mit der
IoC inside AddIn
Hello everyone, looking for help regarding to integration of Zenon AddIn. We are creating a Addin that shall do several stuff like running WebSocket server, Http Api server and of course consume some data from Zenon itself, like Variables or Language
Archive Error Message
Hello Team, In One of our project i got error message "Archive XX Data could not be read completely Please set shorter time period" at the time supervisor runtime is on. The message is keep on coming after clicking "ok". This project is running perfectly
Time value Archieve
Hi, I need to create a variable and store the shift start time and stop time to add in report, please let me know how to store time value in a variable Regards Sandeep This is a migrated post! Originally posted on 20.06.2019 by user sandeep2018. Please
S71200 communicatin problem
Hi, I have established a communication with siemens S71200(via S7TCP driver) from Zenon 8.0.If there is a small communication drop the connection is completely failed and it is not reconnecting only if I go to editor and open close the driver properties
Archivwerte in ein anderes Archiv übertragen
Hallo, ich habe Variablen mit Zählerstände per VBA + Zeitfunktion von einander abgezogen, um so einen 15min Verbrauch zu erzeugen. (gibt es hier was besseres?) Das gleiche habe ich für die Tagessumme, Wochensumme und die Monatssumme gemacht. Ich glaube
EveryWhere Server Create Variable with ODATA-Request
Guten Tag, ich teste gerade den everywhere-Testserver mit dem Postman Die Zugriffe funktionieren soweit, ich scheitere aber bein Anlagen einer Online-Variable. Könntet ihr mir bitte ein Beispiel eines XML-Create-Post-Requests zeigen ? Danke This is a
VSTA editor problem
i can't open my VSTA editor anymore. vba works very well. i've tried all of them, backup and restart computer. This is a migrated post! Originally posted on 18.06.2019 by user Clarissesig. Please be aware that information can be outdated.
Right Click continuously button for a multi touch
Hello, I would like to insert in my project (for a multi-touch panel) a button that simulate continuously right click if stay pressed. I found only a function that if I press on button , the next click is a right click... But I have to press on it everytimes
Alarm Cause Text
Hi, I just want to know if its possible to define the alarm cause text and description from the zenon workspace editor or is it only possible to create via context list screen in runtime. I have 5 nodes with 30 fault reasons in each node. Regards Sandeep
Report Viewer Export/Print won't work
Hi All, Since we have upgraded Windows on our server, I have a problem with Report Viewer Export/Print function. I am using it in two ways. Once to generate AML Report and once for generating report of actual values. I attached DiagViewer logs and screen
Data extraction using function code 14
Hi, does anyone have any experience on using function code 14(read general reference) to extract data from a meter? Can share about the steps and software used to extract the data? Zenon have a function that can send specific command(driver command) to
Command Processing with USINT data type from a DNP3.0TG driver
Hi, I would like to ask on how I would configure command processing for Close/Trip command of a breaker. From the zenon energy edition training that I attended, they have used IEC61850 driver and BOOL data type. Right now, the controller of the breaker
Bedienfreigabe nach Timeout ablehnen
Hallo. Ich habe ein Problem miteinem Zenon 7.10 Projekt mit 2 Redundanten Rechnern und Bedienfreigabe. Aktuell ist dies über die Standarteinstellungen geregelt. Nach Ende des Timeout erhält der anfragende Rechner also die Freigabe. Der Kunde möchte nun
Hysteresis / Deadband for process gateway signals
Hi, I'm trying to achieve a 'deadband' on analogue inputs sent via DNP3 outstation from process gateway. Support have confirmed that PG doesn't have such a feature so I have requested that be added to roadmap for future. In the meantime I'm trying to
Alarm filtering
Hi, Is it possible to retrieve only acknowledged alarms in the report? if so please let me know Regards Sandeep This is a migrated post! Originally posted on 11.06.2019 by user sandeep2018. Please be aware that information can be outdated.
DynamicProperty bei Send Mail Funktion wird nicht übernommen.
Hallo, ich versuche den Text einer Send Mail Funktion vor dem Versenden abhängig vom Alarm zu bearbeiten. Ich nutze hierfür C#. Wenn ich es richtig sehe ist der Grenzwerttext so zu erreichen: m_Project.FunctionCollection["FU_Send_Alarm_Mail_Grenzwert_"
Next Page