zenon EE 7.2 iec-61850 communication

zenon EE 7.2 iec-61850 communication

For now we have been in trouble to processing YANBU phase 3 project regarding IEC-61850 communications in SaudiArabia

1. a matter for phenomenon>>

We are communicating about 100~150 IEDs from one Server by using ZENON EE 7.2 ver.>>
While we are communicating ABB REF542 a problem comes up now, however when it works rightly the data is transmitting properly, too.

Though, When IED Power turn off or delete LAN CABLE
it doesn't recover automatically.
RCB it can't be enabled.

2. test

We been repeated on/off three of(IED) at the same time, we recover them three out of ten times randomly.
And also the rest of 7 times it didn't recover
We need to check about wireshark capture and diagnosis log.
Attached File on email.

Zenon driver : setup status
Polling : 500ms
IP : 10.50.11.245
SUBNET 255.255.255.248


IED IP address>>
10.50.12.90>>
10.50.12.91>>
10.50.12.92

wireshark & logfile
http://bigfile.mail.naver.com/bigfileupload/download?fid=UXFZ16+GW4YjK3YZaAiGFAtXFxtma3YZKAulKxgqKxUwFxMqF3YwFxb9KxU9axvlHrMrFqtqK6KwMxICFqJvaxuZpoi4FxiCKoKmM4k0FA0S>>

I am looking forward to your quick response




This is a migrated post! Originally posted on 06.11.2019 by user nafunky7. Please be aware that information can be outdated.

    Disclaimer

    This document governs the use of our Community Forum. By registering and using the platform, you accept these conditions.

    The COPA-DATA Community Forum serves to encourage the exchange of information and experience about the zenon software between forum users respectively zenon users.

    Please mind that any published information on the Community Forum is the subjective opinion and view based on the experience and the level of knowledge of the author. COPA-DATA does not overtake any responsibility for the content and the accuracy of the shared information.

    Users of the Community Forum are encouraged to share only well-founded experiences and to point out any risks associated with the implementation of proposed solutions to problems. COPA-DATA at its absolute discretion, reserves the right to moderate the forum. In this connection COPA-DATA may remove any information containing false facts, potentially dangerous solutions, bad language or content that may insult, degrade or discriminate others. COPA-DATA may block a non-complying user from forum access if the user violated this provision.

    COPA-DATA reserves the right to change this document from time to time at own discretion.


    Ing. Punzenberger COPA-DATA GmbH
    Karolingerstraße 7b · 5020 Salzburg · Austria
    www.copadata.com