regarding alarm abnormality
sir, in my project there is a problem by which all alarm are suddenly enabled due to a raw valve #2147483647. when this raw valve arrive ,then all bit will be high and alarm will be enabled. so this is a false state. how to disable all alarm when all
Download or Buy WPF Elements?
Where can I buy (or free download) WPF elements ?
Show REAL type data from Zenon Logic to Zenon Scada
Hi, I have a problem with showing variables from Zenon Logic to Zenon SCADA screen. I made one Zenon logic ST file which read data from TXT file and convert strings into REAL. When I start simulation it is working (see Pic.1) and I see the values of
Send couple variables to master 101 or 104
Hello We want to combine some signals that have the same meaning in one single signal (OR LOGIC) and send this signal to the master Iec 104 or Iec 101. Is it possible to do it in iec 101 slave (gateway).
Alarm Area Unacknowledged alarm status
Dear Mr. /Mrs. For alarm audio purposes we defined some Alarm Areas and two Alarm classes (Minor and Major Classes), i assign a internal varaible to unacknowledged alarm in class linking section, and by reaction matrix tools check the second bit is set
SICAM 230 IEC61850 Driver RCB Config
Hi, How can I set the IEC61850 RCB(Report Control Block) setting on the SICAM 230(Version 7.2 ). In zenon, it is easy to find the rcb setting, but in sicma 230, the setting part of RCB cannot be found. This is a migrated post! Originally posted on 09.05.2022
IEC104 Error (Unadvising id)
Hi , I have been working to send data through IEC104 i have added variable along with their CAOA and IOA addresses and the connection has been made on the other(master) side as well but the values are not showing up and its showing the following error/massage
Default value ACL when no power supplied
Hi, Is there a way to change the default black color to Green if no power is supplied to a substation? I know you can change the clolor of the lines to Green but it seems to cause an issue with combine elements using ALC. If there is no power it defaults
Manual for Configuring IEC61850 Server & Goose in Zenon EE8.0
Hi Is there any configuration manual available for configuration of IEC61850 Server & Goose in Zenon EE V8.00 Regards Gaurav Shukla This is a migrated post! Originally posted on 21.03.2022 by user GauravShukla. Please be aware that information can be
IEC60870 101/104 variable
Is there any difference between IEC60870 104 TCP/IP and DNP3 protocols? When I am using IEC60870 104 TCP/IP protocol I can't receive command processing. Should I create new variable (tag) additionally on Zenon? This is a migrated post! Originally posted
SICAM230 to Zenon10(EnergyEDT)Migration
Hi, For my project,i want to migrate(convert) SICAM230 to Zenon10(EnergyEDT).Is there a wizard for this? This is a migrated post! Originally posted on 17.03.2022 by user EmreDeniz. Please be aware that information can be outdated.
Event page alarm sequence
Hi, I have one issue with sequence of event, I am using 8.2 version. If The page of event opened and the IED sent around ten signals I am founding some alarms not in sequence as per time, the arrangements of alarms not as per time, I checked inside relay
DNP3 configuration
Hello, I am using Scada system with Zenon. I have DNP3 protocol as slave and it's communicated properly with devices. But I can't receive alarm and analogs at real time. It's to late 10-15 minutes. I also used IEC60870-5 101/104 protocols that can transmit
Symbolic Address bsaed on Functional Constaint
Dear Mr. / Mrs. is it Possible to define Variable on IEC850 Driver Based on FC? for Example "Server!F05BCUPRO/PTOC1$ST$Op"? or we must define 3 or 4 Variable to indicate which phases involved in faults. for example: Var1="Server!F05BCUPRO/PTOC1/Op/PhA[ST]",
Command Processing with Interlocking
we having 10 no's of outgoing feeder, For breaker command we are using (CSWI/Oper.ctlVal) eg, 1.H01-OUTGOING FEEDER1 (H01_CSWI1/Oper.ctlVal) 2.H02-OUTGOING FEEDER2 (H02_CSWI1/Oper.ctlVal) . . . 10.H10-OUTGOING FEEDER10 (H10_CSWI1/Oper.ctlVal) and interlocking
How to use command processing for IEC 104 and IEC 101 process gateway?
Hi, i want to check the command through process gateway using command processing with interlock check, i am using IEC tester for executing the command. command is also executing without command processing and interlock check. is there any setting need
action lock symbol
Hi everyone, Currently, i have configure a lock action in my command group. I want to ask how do i configure the combi element that show my item was lock. I am referring to this lock action in the command processor. based on this help chapter, the lock
feedback and response variable using iec104
Hi all, Is there any sample of creating action and response variable using iec104. I have an issue here where both variable is not connected each other. Thank you This is a migrated post! Originally posted on 08.12.2021 by user aizatmasuri. Please be
Problem during driver iec870_103 implement
Hi everybody, I need your help!! Here i am going to communicate with some protection relays using 5-103 protocol, but when i used the simulator to communicate with zenon driver, i found the first telegram sent by the driver is "10 47 01 48 16", that means
DR Directory Data View
Hi, I had fetched DIR data from relay it shows in "*!Directory" variable. Relay consist of multiple DR files. I used dynamic text element to view that file, though it have multiple data view could not able to view all in single time. Is there any option
IEC61850 and Process Gateway IEC870Slave Direct Command Execution with Interlock check
Hi, I have a Zenon Energy Edition communicating to x IED's in IEC61850. A dispatch center is connected to the Zenon using the process gateway IEC870Slave. I have a question about commands sent from a dispatch center without using the Select Before Operate
TABLE .ALARM en .CEL not created in SQL database
Hello, For some reason when I create an Export CEL/ALM function that has to Export de CEL/ALARM to the SQL database the table that I want to create is not created in the database that was selected after closing the setup dialog. (dbo._ALARM or dbo..CEL).
Show alarm value with different text
Dear All, I need to show the status of the variable or it value with different txt, like I want to show the value not numbers (0/1) I need to make (ALARM/NORMAL)(FAULTY/NORMAL)…..etc. When I use the txt at reaction matrix only one value coming at the
Command processinng zenon edittion
Dear support team. Good working day to all of you. I just started learn about Zenon edition 8.2 32bit with a simple project. In my project, I create a standard screen named "overview" for single line Diagram. In which i Created a combined element object
Switch with more than 2 states
Hello Everyone, I have some difficulties to make what I wanted. I wanted to create a switch with more than 2 possible states and to change the state of the switch when I click on it on RunTime. But, I succeeded to create a switch with more than 2 states,
Reading health of standby IEC61850 server
Hi As zenon IEC 61850 client only establish connection with standby server once primary server is failed is there any way to read health of standby server even when primary server is up and running in IEC850 driver. Regards Gaurav This is a migrated post!
Automatic line coloring and MMXU
Hi, I am new to zenon and I ave tried to connect automatic line coloring with MMXU1 lock of measuring voltage. So, when you have voltage over some value the line should be colored otherwise it could be white. But can not connect MMXU1 block with automatic
1200 + IEC 61850 device connection to Energy Edition
Has anyone attempted to connect 1200 plus 61850 devices to redundant zenon energy edition systems? Is there a front end com device normally used? I don't see adding the number of 61850 driver instances required for 20 devices each Thanks for any advice
ALC Alarm Line Coloring
Hi, I am a begginer user in zenon energy and I am making my first application. I have 2 line input bays, each bay powered by a source. Source 1 is configured with red color and source 2 with blue color according to ALC, when connected. I configured the
Real time Data bits transfer between server & clients in zenon
Hi All, I have a bit of doubt like as simple, in zenon is it possible to find out the databits transfer for every sec from server & clients and in all protocol like MMS packets in IEC 61850, 101, 104, modbus, opc, dnp??/ Kindly suggest me if any solution
IEC870 driver, use originator in REMA
I former used Sicam230 before I recently switched to zenon v8.20. In Sicam230 I used M1-M8 in REMA to be able to recognize the source of a command TI45/TI46 and display it in CEL. But when I use these M1-M8 in zenon (1=external scada, 127=zenon) no entry
Reading value of [CO] in IEC850 variable
Hi I am using iec850 driver in one of our project command processing works fine when command is given from zenon scada however when command is given from any other location e.g IEC101 I am not able to log them to CEL which I understand because of [CO]
Connection Timeout When Remove DO Card from RTU
Hello, I have a project requirement, where I need to find out the acknowledgement of Action Variable command initiate and execute successfully. For that I am using COT reference of command variable i.e. if COT-7 Command Select and COT-10 Command Execute
Connection error variable.
Hello, I have two RTU connected to one driver via redundancy. So if I lose connection to RTU1 then RTU2 take over. But I want an alarm in the HMI that driver lost the communication to a specific RTU. Before I run Sicam230 and AK-Driver then I just made
Periodic Synchronization of PLC
Hi all, I'm a beginner on zenon and I would like to send periodically a command of synchronization on driver IEC104 to one or more PLCs (RTUs). This command should be sent eg. every five minutes once the link IEC104 with the PLC is up. Many thanks in
Zenon Energy Edition IEC104 driver Redundancy According Edition 2 LANGROUPS
Hi, I have a question related to redundancy according IEC60870-104 Edition 2. I'm at the moment converting a Sicam 230 program into a Zenon program. The existing configuration with Sicam 230 has following setup: - Two Redundant Sicam 230 SCADA Servers.
ICCP Configurations in Zenon 8.20
Hi, I trying to connect Zenon ICCP Server wit Triangle Microworks Iron ICCP test client. When I try to connect client is gives to me connection error. I tried this case with Triangle Microworks SCADA Data Gateway and Iron was correctly connect to SCADA
Response variable value Command Processing
Hello. I have an problem i need to change the response variable value that are 0 and 1. I have made an Command group and also a reaction matrix for my signals. The response value is an T31 dubble point information and the command is an TI46 dubbel command.
Experience on Trasformer Monitoring on Zenon
do we have any specific experience on connecting Transformer for its parameter monitoring and reporting? then kindly share some document or sample screens. Thank you in advance. This is a migrated post! Originally posted on 22.09.2020 by user Amit Bharadva.
Historian and report generator
Hi. I want to create a archive which will save value of variables once per day at specific time e.g. at 2 pm. I have archive, but It only safe at 12am. I tried to change some settings like 'Start of Archiving', but it didnt help. This is a migrated post!
Next Page