Recent Topics
SetValueWithStatusEx restriction in VBA 7.11?
Hello support team. After switch to 7.11 our old project's VBA code cannot be compiled with selection of SetValueWithStatusEx function and shown an error message: Function or interface marked as restricted, or the function uses an Automation type not
Printer Select......
Hi, When trying to select a printer in run time i get the attached error? I have printers installed on the OS. Any clues as to what this blank error is... ;-) .? thanks SA This is a migrated post! Originally posted on 01.02.2015 by user synergyautomation.
Originator address in T104
Dear sirs, Is it somehow possible to define originator address for command datatypes in Zenon T104 driver? Searched the topic throughout the forum, and the only link found is following, from 2011: http://www.copadata.com/forums/showthread.php?t=1581&highlight=originator
Disable Element.....
So if I was using vb.net i could just do btnLogin.Enabled = False This would grey out the button and not let the user click on it. Is there the possibility for this? I thought i could just put a rectangle over the top of the element in question with a
Message Control SMTP mit web.de
Hallo, ich bin gerade dabei das Message Control einzurichten. Ich möchte zunächst einfach eine E-Mail zu Testzwecken verschicken. Hierfür verwende ich den Postausgangsserver von web.de. Ich habe die Einstellungen direkt von https://hilfe.web.de/mailprogramme/pop3.html
Display in 2 screens
Hello Support Team!!! I have 1PC with 2 screens (2 ports DVI) - Working OK When start Runtime Zenon I want it displays in two screens( with seperate contents) Can you show me? Thanks. This is a migrated post! Originally posted on 30.01.2015 by user tuanda88.
Filters in Extended trends
I have a project with an extended trend page, and the user can create and use filters. However, he wants for one specific filter to always be displayed when the screen is opened. Is there a way to call up a filter other than by the selection box? To do
Trending Diagram Error - C0000005 ACCESS_VIOLATION
Hi , There is an error pop up when click on the "diagram" button in the trending screen. Unhandled exception: C:\ProgramData\COPA-DATA\zenon711\zenrt32.txt C:\ProgramData\COPA-DATA\zenon711\zenrt32-7.11.0.10238(0)-20150129-105922-DT0000.dmp In Zentr32.txt:
Writing and reading bits from\to Word
It's my first post on this forum, so maybe I haven't noticed a post answering to my question, if it have been already written. I've read posts of using Zenon Logic and Combined elements etc. to read bits from word, but it haven't solved my issue if I
Relays Offline In Runtime
Dear Support, We are using DNP3-Process gateway over serial communication. Our network include 50 relays out of which 3 relays are showing offline on Gateway Runtime. In actual Relay is reachable(pingable) and from other workstation on the same network
IEC 61850 Edition 2
Hello colleagues, Does zenon v7.11 support IEC61850 Edition 2? I need to integrate to HMI protection device which can use IEC61850 Edition 2 only. I tried to connect this device to zenon v7.10 (build 15292) and couldn’t get reports, only polling. I
Iec61850
Hi everyone I have a GE protection relay muliline L30 and IEC61850 protocol and I want to animate the state of the input digital output. (GGIO1). 1-What are the steps I follow to achieve this animation 2-How to configure the driver? Server? Client configuration?
Process Gateway error
Dear Support Team When I turn on Process Gateway there is an error. You can see picture. Can you help me to give the reason for this? Maybe this is the reason I can not connect ASE2000 to Process Gateway??? Thanks This is a migrated post! Originally posted
Alarm limit enable/disable
Hi everybody, I want to know, how can i enable/disable some limit of alarms in runtime? have a nice day... This is a migrated post! Originally posted on 27.01.2015 by user fatih.oz. Please be aware that information can be outdated.
Setting values in Editor and using them in Runtime
Hallo every body, I have some problems with settings values!!! I have a dll which I developed in Visual Studio 2010 with C#. This Dll has a Form in which I can set some values in Editor and I will use this values in runtime.. To save some configuraion
Commands with Simulation variables
Hi! In my project i use commands to control ABB IED's through iec850. All ok, all working. Also, i have some swithes which i can't control and read their position. But operator need to see their position and send "virtual" commands to swith them on or
Communication Error
Hey guys, I'm having a problem with my wireless connection between the pc and the ev3, every 2 or 3 sec there is a communication error, and that makes it very hard to control e whatch my variables, because they keep blinking e stopping the response. Thanks.
WPF Element Indicating Instrument
Hi There, I have managed to get all the WPFs working well except this one: WPF Element Indicating Instrument I cant find where to link my variable so that the indicator changes. I read a previous post that suggests the WPF was not formatted correctly
Size and Rotation Dynamic - CE
Hi all, so I understand the the Size and Rotation Dynamic for a drawing object is not possible under Windows CE, so i ask is there a way to do this that is possible under Windows CE project? Basically i need to change the width of a rectangle based on
Global updatetime and polling time
Dear Support Team I have a question that : What are differences between " global updatetime" and "polling time" ? How 2 parameters affect to each other? Thanks. :confused: This is a migrated post! Originally posted on 21.01.2015 by user mrdaotrongviet.
Verbesserungsvorschläge Erweiterter Trend
Guten Morgen, da der Weg über den lokalen Support bisher nicht den erhofften Erfolg gebracht hat, versuche ich es nun auf diesem Weg. Bin mit den Features des erweiterten Trend Moduls nicht besonders glücklich und hätte folgende Wünsche bzw. Verbesserungsvorschläge:
Zenon 7.0 Runtime
Hello Support, I have zenon 7.0 runtime installed on one gateway with windows XP embedded, we are facing an error(Unhandled Exception OR Window Dump), I am using process gateway also there. Please advise. This is a migrated post! Originally posted on
Changes have no effect in touch screen.
I have a problem. I made changes witht Zeno editor. Save, transfer the proyect to touch screen, but the changes have no effect. I know it can not be happening. Someone can help me. Thank You This is a migrated post! Originally posted on 19.01.2015 by
Tooltip
Hi, Is it possible to set the tooltip of an object using VSTA in runtime? I'm using VB.net. I have got the mouse over event working but object.tooltip is read only. This is a migrated post! Originally posted on 17.01.2015 by user allmendinger. Please
Zenon Editor v7.11 SP0 Build10238 can't be started!
Hi, :) Zenon Editor can't start, however Runtime has no issue to run. Editor is running well previously, however it can't be started now, no error message, no response, even re-installation can't solve the problem. ZenSysSrv.exe, ZenDBSrv.exe, and ZenDBAdmin.exe
Import DATA mit IEC61850
Ich habe eine Anlage mit einem ZENON Energy und einige Sepam von SChneider. Ich benutze den Driver IEC61850. Im Sepam will ich die Energie auslesen, der Daten Typ ist INT64. Beim importieren der Varible in Zenon erhalte ich eine Variable mit Daten Typ
Alarmstatuszeile im Standby
Hallo. Ich habe eine Frage zu einem redundanten System. Bei dem Server wird die Alarmstuszeile korrekt dargestellt, im Standby ist sie nicht sichtbar. Woran kann das liegen und wie kann ich dieses Problem beheben. Vielen Dank für Ihre Hilfe. This is a
Sprachübersetzung mit VSTA
Hallo, könnten sie mir an Hand eines Beispiels zeigen, wie die Sprachübersetzung im VSTA zur Laufzeit der Runtime anzuwenden ist? Eine weitere Frage wäre, wenn ich mehrere Sprachdateien in meinem Projekt habe, wie ich kann ich über VSTA ermitteln, welche
Redundante IEC 60870-5-104 Verbindung mit Gateway
Hallo liebes Forum, es soll eine redundante Verbindung auf ein redundantes 2-Server-Zenon System gebaut werden. Funktioniert momentan aber nicht redundant, es wird nur auf Server 1 zugegriffen. Dafür ist ein Gateway eingerichtet. Soll die Verbindung redundant
Redundante IEC 60870-5-104 Verbindung mit Gateway
Hallo liebes Forum, es soll eine redundante Verbindung auf ein redundantes 2-Server-Zenon System gebaut werden. Funktioniert momentan aber nicht redundant, es wird nur auf Server 1 zugegriffen. Dafür ist ein Gateway eingerichtet. Soll die Verbindung redundant
Beckhoff NG Treiber und TwinCat 3 keine Kommunikation
Hallo, ich arbeite zur Zeit an einem Twincat 3 Projekt welches mit einer Zenon 7.11 Visualisierung ausgestattet werden soll. Nur leider wollen die Beiden trotz der installation auf dem gleichen Rechner nicht mit einander sprechen. Laufzeitsystem: Win
Missing drivers for engines on EV3
Hey guys, anyone knows how to solve this problem, when i configure my controler to the ev3, only shows sensors e the button, but no drivers... Thanks. This is a migrated post! Originally posted on 13.01.2015 by user manoelribas. Please be aware that information
Hardware Requirements (General)
Hello Support, Assume we have 7000 tags, 6000 are Modbus TCP tags and 1000 belong to Math variable type. Further assume that we have around 500 screen switch functions and few allocations ( lets say 10) What should be the minimum hardware parameters to
Variable Identification in REMA
Hi! I have some variables (Var1, Var2, Var3...). I create 1 Numeric REMA and check option "Treat each change of value as new limit violation". So, now i see some static text in AML when any of this variables changed. My question: Can i use identification
Opening Windows Application from Runtime
Dear Support Team, According to the customer requirement, Windows start key and task manager will be locked after completing our SCADA commissioning. So Please guide about the settings need to be done in the Zenon editor to open the windows application
Kreisdiagramm, Alarmmeldung, ARchiv
Hi ich hätte einige Fragen / Probleme beim Zenon Editor 7.11, bei welchen ich keine Antwort im Hilfebereich / Forum gefunden habe. 1) Kreisdiagramm Ich weiss nicht ob ich blind bin oder nicht, jedoch entdecke ich keine Möglichkeit ein Kreisdiagramm zu
Alamrmeldefenster Elementhöhe dynamisch
Ist es möglich das Alarmmeldefenster mittels der VBA Ereignisse DragDrop / DragOver / DragBegin z.B. in der Objekthöhe zur Runtime verändern zu können? Oder gibt es eine alternative Möglichkeit dies zu erreichen? Zenon Version 7.00 SP0 Build 17 This is
VSTA ProjectAddin not being executed?
I'm trying to implement OnlineContainer functionality to perform certain actions if a variable received from the PLC is changed. I've copied and implemented the code from the tutorial in this forum. However, the code isn't being executed. I've tried adding
Tooltip für Linie oder Kreis erstellen V7.11
Hallo, Zenongemeinde, gibt es irgendeine Möglichkeit in der Version 7.11 einen Tooltip für eine Linie / Polylinie, Kreis zu erzeugen, damit man in der Runtime beim Mouseover einen Text wie z.B "Verbindung 1234" als Tooltip angezeigt bekommt? Im Forum
Remanente Variablen per VSTA schreiben
Hallo, laut der Dokumentation werden Variablen mit der Eigenschaft"remanent" erst beim runterfahren der RT in ein File geschreiben. Leider hat dies zur Folge, dass bei einem Spannungsausfall „nderungen noch nicht gespeichert sind. Kann ich das sicher
Next Page