Recent Topics
Forecast calculations
Hi i am trying to create a screen where i can perform some forecast calculations. This is done in collabaration with the PLC controller and zenon basically sends the parameters to the PLC which calculates the values for at certain timeperiod. Then the
IEC 61850 .cid file import
Hi to all. I have dilemma about how some files are imported with .cid file. Example: When I open xyz.cid file in notepad++ a get 6 values of mag.f[MX] type, but when I do import and when I filter those same tags with same name, there are more tags with
Siemens Logo
Moin, ich wollte mich mal erkundigen, ob es eine Möglichkeit gibt eine Siemens Logo auf die Zenon aufzuschalten und was genau ich dabei zu beachten habe? Also welcher Treiber zu verwenden ist (S7 TCP/IP) oder einen anderen? Gibt es bei dem Zugriff auf
Schablone / Bild in den Vordergrund bringen
Hallo, ich habe ein Projekt in dem mehrere Schablonen gleichzeitig aufgeschalten werden können. Diese nehmen nie den gesamten Bildschirm ein, sondern sind kleiner. Ich möchte nun eine Schablone die sich im Hintergrund befindet mit einem Mausklick darauf
bildspeziische Funktionen 2x einfügen
Hallo, ich möchte bildspezifische Funktionen, wie z.B. Alarme quittieren zwei mal auf der Alarmseite einfügen. Hintergrund: ich habe je nach Einstellung Button mit Text oder Grafik, deshalb brauche ich zwei Button mit dieser Funktion. Zenon 7.50 meckert
Language error to restore?
Hi My zenon is V7.50 installed in Spainish languague, where i created my project, so i tried to restore my project in zenon v7.50 english version installed, and i got error. i need to open always in spainish language? thanks This is a migrated post! Originally
Change Screnns with buttons
Hi I have 20 screens, and with 2 buttons i would like to change the screens, how can i do it ? This is a migrated post! Originally posted on 02.03.2017 by user marcelodias. Please be aware that information can be outdated.
Bildelemente nicht sichtbar in Runtime
Hallo! Wir sind ein Projektteam an der FH Oberösterreich, dass eine HMI für eine Fertigungsstrasse in einem FH Labor gestalten soll. Wir haben nur leider ein großes Problem mit den Bildelementen und Schablone. Bestehende Schablonen ändern funktioniert
Sicam230 Editor V7.20 - Bilder nicht sichtbar!?
Guten Tag Ich habe eine Sicam230 Editor V7.20 installiert. Die ganze Installation inkl. Registrierung hat reibungslos geklappt. Nun habe ich ein bestehendes Projekt importiert. Die enthaltenen Bilder sind jedoch nicht sichtbar wenn man sie öffnet (nur
Does this pop up msg can caused startup fail to boot up?
Does Zenon Runtime pop up msg (As per attachment) can causing startup fail? This is a migrated post! Originally posted on 28.02.2017 by user lim hui sin. Please be aware that information can be outdated.
Zenon up gradation from 7.0 to 7.50
Dear Support, Can you please help out in up gradation of my running system from 7.0 to 7.50. I am having project running on zenon ver 7.0 but for more features i want to upgrade my system to 7.50 without disturbing my previous system. so can you please
Reading COMTRADE files automatically
Hi, I need to read COMTRADE files from a bunch of relays (35-40) in a substation. The operator has requested a function by which all COMTRADE files can be read automatically (either by a single button or at a fixed time). Does anyone have some idea on
Command Information IEC61850
Hi all, Could I ask how to add command information (Select, Operate, Cancel) into Zenon 7.5 ? I followed the step of manual (Additional Cause Diagnosis) to create 2 variables *Oper.ControlRun and *Oper.ControlState according to the varible *Oper.ctVal[CO]
Zenon v7.20 unable to communicate with S7 1200
Hi i am trying to comunicate with the PLC 1200 and i cant what should i do? This is a migrated post! Originally posted on 23.02.2017 by user marcelodias. Please be aware that information can be outdated.
ProcessGateway Control 2 BCU Hot Standby
Hi all, My system is now having 2 BCUs working with mode Hot-Standby. That means in one time just only 1 BCU is Hot mode and the other is Standby Mode. The Hot mode allows controlling but the Standby does not allow this. So, the problem here is when communicating
SetValueWithStatus
Hi, I have some problems with the SetValueWithStatus function in which the DateAndTime has to be supplied as a long, instead of a Date Type ... In my program, if an alarm is selected in the AML and then a button is pushed, I set the M3 StatusBit of the
Sm@rtServer/Client in Zenon integrieren
Hallo, ich habe die Aufgabe mehrere Tochpanel (Siemens) mit auf einem Leitstand darzustellen. Die Siemens Touchpanel bieten die Möglichkeit per Sm@rtServer eine VNC Verbindung aufzubauen. Als Möglichkeit auf den Server zuzugreifen gibt es den Sm@rtClient
Data is not updated in RT when change setting
Hi all, I got a problem about the data when I tried to change setting but nothing was updated in RT For example: - I changed the ordering and the name of column for Alarm Message List and Chronological Event List but when I move into the screen Alarm
Interlocking teks
Hello I created an Interlock for additional controlbutton in commandprocessing display. For every Interlock you can set the Interlocking tekst. I expected to see the interlock text in the same Interlocking tekst indication in the Commandprocessing dialog.
IEC680, Qualifier of command, Befehlsgabe
Hello! I have a Problem with the Interlocking check. It Looks like that this flag is not set. In the helping Information i can read that this function only works with "Auto/Remotebefehl" and "Pulsbefehl" and not with "Schaltbefehl". Is this correct? thanks!
Versionsupdate 7.50
Hallo, leider bekomme ich auf meine Email-Support-Anfragen keine Antwort... ich hoffe daher, dass mir jemand im Forum weiterhelfen kann. Ich schalte bspw. Comboboxen über eine interne Variable sichtbar. Diese interne Variable setze ich mittels Button
Error file fpm.cmp in Zenon 6.21 SP1
Hi, I have a HMI with Zenon 6.21 SP1 installed, so i used the Zenon 6.21 SP1 Editor version to send the project to the HMI, but now the following error appears: ERROR: "The file 'fpm.cmp' has version 6.22 SP1 - but the project has version 6.21 SP1!" Anybody
Auslesen der selektiereten Alarme in der AML
Hallo! Ich suche eine Möglichkeit die in der AML selektierten Alarme am Stück (so etwas wie "getselectedAlarmItems()") auszulesen. Der Event "AlarmListSelectionChanged" wird beim gleichzeitigen Selektieren von 30 Alarme 30 mal hintereinander ausgelöst
Zusatzinformation eines Variablengrenzwerts ansprechen
Hallo alle Zusammen, ich würde gerne in Erfahrung bringen wie ich die Zusatzinformation eines Variablengrenzwerts anspreche. Ich habe eine BOOL-Variable und löse einen Alarm aus wenn sie den Wert 1 hat. Das bedeutet der Grenzwert[2] ist aktiv, in der
Nachladen vom Webclient verkürzen
Hallo, ich versuche derzeit, die Runtimedaten, welche der Webclient verwendet in einem Gemeinschaftsverzeichnis ab zu legen, damit sie von mehreren Usern gleichzeitig genutzt werden können. Zur Konstellation: Es gibt einen Zenon Runtimeserver 7.0 mit
Report View Screen Type
Hello, I have zenon V7.20. I want to display a report. I have created .rdl file for it. When I am creating a new screen, there is no screen type with "Report Viewer" or similar. How shall I display the report? I am much worried, Please help ! And thanks
What is that tpKanaltypes all about?
Hi, where can I find information about 'tpKanaltypes' from CreateVar function? i.e. myVariables.CreateVar(VarName, zDriver, zenOn.tpKanaltypes.tpSystemVariable, zVarType); Thanks in advance! This is a migrated post! Originally posted on 18.11.2016 by
Workspace file cached locally?
Hi, I have experienced quite a strange issue while working with the Zenon editor across different machines, with the editor losing changes when editing on a different machine to the previous time. Maybe you can advise what may be the cause.... Some basic
Multi user variable administration
Hi, I'm using Zenon 7.5 SP0 Build2596 64Bit. While editing a structure data type I triggered the "variable Administration" option. i saw in your manual "Distributed engineering" page 20 section 8.2.1 : "In the special case of the variable administration
VSTA API documentation
Hi, I'm starting to create a new Wizard in Zenon 7.50 with VSTA. I've started with the Wizard_Demo as template and it looks good. My wizard must perform many different operations with functions, scripts, copy workspace, etc. I'm looking for an API description
Screen title in header screen
I am new in zenon. I have question related to screen navigation. Let say, that we have two frames - one on the top, named “header†and one below the first one, named “main†. In the “header†frame, by default, a screen “HEADER†is opened.
Web Server Pro Light - how to start, which browser I can use
Dear All, I am using zenon v7.50 under Windows 8.1 Professional. I am useing zenon Supervisor and Web Server Pro Light on the same PC I just install Web Server Pro Light. I opened the Web Server Pro Light dialog from Control Panel. The license was entered
Report Viewer Configuration
Dear support, Can you please brief me how to configure report viewer in Zenon 7.50 as i have configured but not getting value in report. Also can you tell me how can we add specific time filter for report viewer. Your help really appreciable. Thanks Vivek
Bild aktiv - Variable
Hallo, ich möchte mit dem zenon Editor die Bild aktiv-Variablen auslesen. Dazu verwende ich folgenden Code: For j = 0 To thisProject.DynPictures.Count - 1 MsgBox thisProject.DynPictures.Item(j).DynProperties("PicActivVar") Next j Wenn für das jeweilige
Extraction of Files through IEC 101
hi, i am using Zenon energy edition 7.5, Problem 1: case 1: i have a IED of IEC 61850 and its connected to a gateway (SEL-2241) which give IEC 101 to Zenon, now that IED has a Disturbance recorder (COMTRADE) files in it and i need to extract those through
Key word
Hello everyone, I have set on the Zenon Supervisor (v 7.50SP0 BUILD 25796 32 bit) the language as follows: Language 1: DE.TXT Language 2 ENG.TXT Master: ZENONSTR.TXT I can not solve this annoying problem, In the Runtime, by selecting the English language,
Function mit Substitutionper VBA aufrufen
Gibt es eine Möglichkeit eine Funktion mit ihrem "Parameter für Substitution" aufzurufen ? Habe ein Bild und dazu passend eine Function Substitution {PARAM} angelegt. (für den Substitutionsparameter eines dynamischen Elements). Vom dynamischen Elements
VBA am Webclient debuggen
Ich habe seit längerer Zeit ein Problem mit einem Webclient. Jetzt muss ich dann wieder zum Kunden und möchte das endlich beheben. Da es jetzt aber schon eine Weile her ist dass ich dort war, bin ich mir mit den Angaben zum Verhalten nicht mehr 100%ig
Whats the "BECKHNG" DynProperty for "Symbolic Address Resolutions"
Hallo Team, i created a "Beckhoff TwinCat NG Driver" (BECKHNG) driver and want to set it to "Symbolic Address Resolutions". What is the DynProperty to use? I could modify the data stored in the driver table in the SQL Server. There is a number that flips
Sichtbarkeit eines Trends
Guten Tag an alle Ich habe folgendes Problem: Ich würde gerne die Sichtbarkeit eines Trends (erweiterter Trend auf eigener Schablone) über eine mathematische Variable steuern. In dieser math. Variable sind zwei boolsche Variablen mit ODER verknüpft. Dies
Next Page