Recent Topics
Runtime pictures differs from project pictures
Hello. I'm using Zenon V6.22 SP1. I got project (made with V6.22 SP0 so it was automatically and successfully converted during opening) to make some changes. I have the panel (Windows CE) with this project already loaded. The problem is when I open picture
About Runtime License
Dear friends, If I have a Zenon Energy Server License installed in a computer and I connect a monitor to it, i can see the HMI (in local mode), because server license already includes runtime license inside. That is right? or we need to buy also a Client
Windows driver communication problems
Dear Forum-Community, Due to major security leaks in Intel and AMD processors, Microsoft and other software / hardware vendors released security updates at the beginning of the year 2018. An issue in these updates leads to problems with zenon. The effect
BECKHNG Treiber Problem
Hallo zusammen, ich habe in meinem Projekt kürzlich einen BECKHNG Treiber hinzugefügt. Die Variablen konnte ich einwandfrei aus der Steuerung auslesen, aber ich bekomme keine werte herein obwohl ich in im Twincat 2 eine Value von dem Sensor habe. Ich
Windows driver communication problems
Dear Forum-Community, Due to major security leaks in Intel and AMD processors, Microsoft and other software / hardware vendors released security updates at the beginning of the year 2018. An issue in these updates leads to problems with zenon. The effect
Alarm doesn't appear at alarm Message List
Hi, I'm a beginner with Zenon 7.50 and I'm just playing to understand how Zenon works. I'm trying to visualize 2 alarms on a Alarm Message List but the only message that I can see is 'Creating List...'. What i done: 1) I created 1 variable type 'HIHI_Level'
Änderung der API von Version 7.10 zu 7.60?
Hallo, ich habe ein Problem mit einem selbst geschriebenen Wizard zur Erstellung von Alarmbereichen und deren Klassenverknüpfungen. In Zenon 7.10 funktioniert er tadellos, in 7.60 wird eine Exeption ausgelöst. Hier ein Teil des Codes, bei dem das Problem
Find Maximum or Minimum Value
Hi Everyone, there is a Function block "MAX" which finds maximum value out of two inputs (whose input cannot be extended more than two). So my query is is there Block or a way to find Maximum or Minimum Value out of 8,16 or 32 input values. Thank You...
syntax for post build actions in project/settings
hi what is the syntax to use for post build actions in project/settings I want to copy some files from one directorie to another thanks This is a migrated post! Originally posted on 17.01.2018 by user mos89. Please be aware that information can be o
Problem Process Gateway with GE SCADA software GENe
Hi I have a problem for connection between 101 Process gateway and GE SCADA GENe dispatching centre? I tested with process gateway by other software 101 master (Siemens IEC test ) or Triangle 101 master that it connected well with process gateway (signals,
Hardware Requirements
Hi support, We want change an exisiting SCADA to Zenon EE, but client wants use the existing computers (hot stand by system). The computers are: - Model: UNO4683 Manufacter: Advantech W7 PRO Core i7 2.0 GHz 4G DDR3 SDRAM 64GB SSD - Model: ECU4784 Manufacter:
error when installing zenon 7.6 operator
hi i'm installing zenon 7.6 on a project pc and everything is ok except the installation of the editor. log is attached. thank you This is a migrated post! Originally posted on 21.01.2018 by user eden212. Please be aware that information can be outd
Zenon 64 Bit application is not opening - unhandled exception- exception code C0000005 ACCESS VIOLATION
Hello, In my laptop i have installed Zenon 7.50 and OS is windows 7 professional SP1. I can able to open Zenon 32 bit editor application in my laptop, but i can't able to open Zenon 64 bit editor application. It is showing the unhandled exception, i hereby
web server zenon config location
hi im using ABB zenon 7.6, im trying to use the web server and client but the problem is that the file "zenon" that contains the file config that Should be in C:\inetpub\wwwroot is located in C:\Program Files (x86)\ABB\zenon Web Server instead. so when
Zwei Webserver Versionen auf einem Rechner
Hallo, wir benötigen Update vom Webserver Sicam 230 Version 6.51 auf 7.20 durchzuführen. Kann die 7.20 Version über 6.51 einfach installiert werden ? Oder muss man zuerst die 6.51 deinstalieren und erst danach die 7.20 installieren. Ich vermute, dass
Web Server 6.51 and 7.20 on the same PC
Dear support I want to ask, if I can have Web Server ver.6.51 ( already running) and ver 7.20 on the same PC? Installation of 7.20 version started but failed. If not. If I have to uninstall Web Server ver.6.51 and then install Web Server ver7.20, can
OPC - Quality bits mapping
Hello, I have one OPC dirver to a Funnel connection with around 13000 tags. If I look the tags in Funnel, using Matrikon Explorer, I can see all tags with good quality, however, in Zenon, near half of those tag have INVALID, T_STD quality and I cannot
web client "file does not exist"
hi, i'm trying to start the web client and I followed all the manuals and the client start connecting to the server but then gives me an error "file does not exist". I can see the client trying to connect in the web server "active client" and then the
PloGGIO Block - IEC 61850 with Alstom Micom P443/P444
Hi everyone, I must send command with 61850 to Alstom Micom p443. I want to use PloGGIO block for that. However I can not find when i am importing to editor. I can see and control that block with IED Scout. Also try importing from .cid file, I can see
ABB 3S_V3 Connection Problem
hi everybody, i'm using ABB ZENON 7.6 and I have problem with the communication to the PLC in the driver: if there is 2 PLC's in the driver and they are connected O.K then everything is working good, but when there is 8 PLC's in the driver that only 2
Run time is not getting started
Hello, While starting runtime ,below popup message is coming and runtime not starting. Looking forward for your reply. Exception in Wnd=0x000B0464(Zenon Supervisor) processing message 0x04F9. IParam=0x99740888 wParam=0x99740672 Regards, Nikhil This is
Run time is not getting started
Hello, While starting runtime ,below popup message is coming and runtime not starting. Looking forward for your reply. Exception in Wnd=0x000B0464(Zenon Supervisor) processing message 0x04F9. IParam=0x99740888 wParam=0x99740672 Regards, Nikhil This is
help with creating variables zenon 6.51
hello, today I tried to create some variables in zenon and couldn't get them working Under variables section in project tree I created as usual and when transported and reloaded project, the variables were created but didnt change, like there was no communication.
Zenon 7.60 Scheduler problem changing switching time in Runtime
Hello everyone, I'm experiencing a problem with the Scheduler in Zenon 7.60 Runtime. I can create a schedule, but once the switching times of the switching points are set, they can't be changed. Double click switching point, change the switching time
Out of memory while starting editor
Hello , While I am starting the zenon editor 64 bit at that time the "OUT OF MEMORY" popup window will open continuously . And zenon editor shows "stopped working" What is the exact issue? I'm using zenon 7.50 Looking forward for reply. Thanks in advance.
[SIPROTEC 5 7SJ82] Issue with command processing... even with command qualifier
Gabriel Simon [email]gabriel.simon@engie.com[/email] PS: I'm suing ZenOn EE 7.60 SP0 with Windows 10 Pro Server 64 bits mode PPS: I can send you a backup of the project if you want.[/FONT] This is a migrated post! Originally posted on 07.02.2018 by user
Version number error in Web Client
Hello, While accessing the SCADA from Web Client it shows the following error: "File 'templates.cmp' has version number 7.50 SP0-butthe project has version number 5.21 SP2!" Kindly suggest a solution. This is a migrated post! Originally posted on 06.02.2018
Alarm Acknowledge popup error
Hello, I am using Zenon-7.50, When i am acknowledging all alarm on Annunciator screen the same time I am getting one popup on Server screen. " You should enter comment in order to acknowledge the alarm!" Even i checked in reaction matrix "comment required
Runtimeservice Reloading - Event
Hallo ich habe das Problem, dass das Projekt reloading Event im Runtimeservice nicht ausgelöst wird. public void Start(IProject context, IBehavior behavior) { try { zprj = context; zprj.Reloaded += Zprj_Reloaded; zprj.Reloading += Zprj_Reloading; } catch
ZenAdminSrv not starting anymore
Hello, on a plant installed a year ago, my customer has a problem when starting one server. The message box "Waiting for service ‘zenAdminSrv" appears when starting the project. The message box does not disappear and the project never starts. I asked
Passing variables to an array by reference
Hi all, I want to group some variables from a PLC in an array so I can process them with the same logic by just iterating the array with straton. The problem is that when I operate the variables in the array the change is not reflected in the original
Checking ping to devices
hi everybody i want to make a function that sends ping to every device (switches,router,PC...) and shows in the zenon if there is a communication to that device or not. thank you. This is a migrated post! Originally posted on 15.02.2018 by user eden212.
Need step by step procedure (with image if possible) to use dongle Wibu-Key for Zenon 6.22 SP1 licencing
I have Zenon 6.22 SP1 Build 0 with Dongle (Wibu-Key). I have installed Zenon 6.22 and Wibu-Key V- 5.22 on Windows XP Pro 64 Bit. Wibu-Key software find dongle when plugged-in. Wibu-Key Server also stat having dongle specified information on status. But
Conditional navigation
Dear colleagues, I am wonder how can I implement manageable conditional navigation for pages. At the moment we have a set of buttons which are laid one over another one with controlled visibility property and each of them has screen switch function attached.
Alarms from a few projects at one alarm list
Hello, I am using zenon 7.60 version. In my application in the project tree I have a workspace which includes 1 global project, and 1 start project in which I have about 30 subprojects. The whole application contains the installation created in two factories.
ETM "Zooming" or "Zooming for Touch"
Hello, The ETM Starter Edition supports "Zooming for Touch", the ETM module supports "Zooming". What's the difference? Kind Regards, Hans van Zijp. This is a migrated post! Originally posted on 21.02.2018 by user hansvanzijp. Please be aware that information
Zenon HTML Bild einen WebClient öffnen
Hallo zusammen, wir möchten gerne einen Web-Client in einem Zenon HTML Bild öffnen. Beim öffnen erscheint immer folgende Fehlermeldung: The control cannot be started as the service ‚zenAdminSrv’ cannot be reached! Please start the service manager
Numerical value representation style
Hello Everyone, I have a plenty variables which stores a values from energy meters and other meters. The lenght of the displayed values is sometimes very long, for example "1092109 kWh". Im asking You if there is a possibility to show the values with
global_vars Einstellung für Redundante Server
Ich habe beide Server in die global_vars eingetragen // Please enter here the computer name, on which the zenon Runtime is installed and on which it is actively running // For redundant Runtime servers, please enter both "server1;server2" var RUNTIMESERVER
Spaltengröße Rezeptwerttabelle
Guten Tag, wo lässt sich die Standardgröße der Spalten in den Rezeptwerttabellen ändern, so dass sie zu der Länge meiner Variablen passt? Wie man im Anhang sehen kann, sind die Namen meiner Variablen sehr lang und werden nicht komplett dem Benutzer angezeigt.
Next Page