Create Zenon Logic
Hi, It's possible to create a Zenon logic project and deploy my logic inside it with API? Thanks in advance. This is a migrated post! Originally posted on 19.05.2020 by user matheusmoller. Please be aware that information can be outdated.
Reaction matrix condition time hysteresis
Hey! I'm working with reaction matrixes in ZEE 8.20 and I'm trying to make it trigger CEL entries with time hysteresis. What I mean is that there is an option called "delay" and it works fine, limit value that I set is not triggered until that state is
Controllogix and Zenon 6.20 SP1
Hello- I am using Zenon 6.20 SP1 HMI with a 1756-L61 Allen Bradley cpu(RSLogix 5000 v17). The plc chassis contains both ENBT and EWEB modules for communication and these remain the originals. I try to upgrade the Allen Bradley cpu to 1756-L71(RSLogix
Process Gateway working status in Runtime
Hello, First of all, to give my question some context, this short introduction: Very often, in energy industry specific applications we do, there is some kind of telemechanic communication channel with parallel or parent system. This channel is of course
Message Control
Hi , I am trying to send message through zenon 8.0 to my gmail account. I enabled the pop in my mail settings & did the configurations in zenon. All function related to Message control as well as user for message control has been confugured in zenon.
How to implement the communication with Zenon from Windows Service (C#)
Hoi guys, I'm C# developer but Zenon is new for me. For new project I have to work with Zenon editor en runtime. At this moment I try to communicate with Zenon from a Windows Service. But I have no idee how to do that. Zenon has a lot of drivers that
Sample how to use C# with zenon editor
Hoi guys, I'm a C# developer. For new project, I have to work with Zenon editor en Zenon runtime. I see that I can integrate C# in Zenon editor. But I don't know how to do that. Are there tutorials or samples available for that? Further what is the limitation
Zenon directly with ABB PLC
Hello all, Greetings I'm new to the Zenon . My project is to collect some data from remotely placed PLCs to my Zenon SCADA. I was thinking of taking Kepware as an OPC to communicate them together with the usage of the Modbus TCP/IP protocol. But i heard
Issue launching script via REMA instant function
Afteroon all, I've come across an issue when using a REMA to fire off a script when limit value is reached using the 'instant' function. I've narrowed it down to the minimum required to replicate it. I am using an internal variable to use as a kind of
Change text by numeric variable
Hello i created a new project and using wizard created system_info1 screen and variables exported screen and variables to my project and currently I have Standalone/Server/Standby-Server/Client from sysdrv driver its strange because if I delete that variable
Process Gateway OPC UA used to initiate IEC61850 Double Commands
Hi, I am at the moment working on a project conversion from Sicam 230 to Zenon Energy Edition and I have some questions on the Sicam Gateway functions which now have to be programmed using the Process Gateway. In Sicam 230, I have the following concept:
Allocations FDA Compliance
Hi everyone, IÂ've working on a project for a while and due to the client requirements I've been working on a very specific way. I'm using the Recipe Group Manager to handle recipes. This recipes have to be very flexible and aditable at runtime. They
IEC61850 - Float32 Variable - Data Type REAL - Unable to use 'Numeric value' element
Hi All, I have been trying to display Float32 variable such as Current and Voltage. However, based on the HELP Section, Tip/Workaround: If you nevertheless want to continue working with the Data type REAL , (such as when there is a limitation of the data
Zenon Monitor Administration Problem
Hi Dear Experts, I have a project with 2 screens, I am using monitor administration and there is no problem about screens. While changing screens in seperated monitors, I noticed that: on the bars (left and right side) there was a problem about screen
Call Zenon API outside Zenon Editor
Hello, I'm trying to find a way to manipulate and generate Zenon Logic block's outside the Zenon Editor running an application as a service. Is there any component in Zenon API that can do it? Regards This is a migrated post! Originally posted on 30.04.2020
Mit VBA Dateien von einem PC auf einen anderen PC kopieren
Hallo, Ich habe mir eine Batch Datei erstellt (mit Parameter œbergabe) mit der ich von mehreren PCs zu einem anderen PC Dateien kopieren kann. Der Parameter ist für die Datei die kopiert werden soll. Immer eine andere Datei. Jetzt wollte ich diese Batch
Laufzeitfehler 91 ohne weitere Info
Hallo, Ich erhalte im meinem Code den Laufzeitfehler 91: Objektvariable oder With-Blockvariable nicht festgelegt. [/FONT]Public Sub Ordner_erstellen() 'Diese Modul erstellt Ordner Dim fso As Object Dim VarNr As String Dim Vartext As String Dim Verzeichnis
Zenon network - bandwidth requirements
Afternoon, Has there been any testing to determine the bandwidth requirements for Zenon network? I.e. what is the minimum required connection speed between 2 servers or a server and a client? Any maximum on latency? We are considering a network which
AD authentication without joining server to the domain
I would like to ask if it is possible to use the Domain controller as authorization authority without joining the PCs to the domain? Technically this could simply work with LDAP(S). If this is not currently implemented, is there any way to add new/external
How to link an Sankey XML created in Sankey wizard to WPF element?
Hi All, I created an Sankey Diagram Template in the Sankey Wizard with untick for zenon analyzer because i want to use it in runtime only. I got the .XML file in the other folder , but how can i linked it to the WPF element because the WPF element is
104 Driver Error
Good Afternoon, I am adjusting an old V460 project, made in version 6.51. The project is running correctly in a substation and I am using the back-up of this system. To configure the project I am running VMware with windows XP on a windows 10 computer.
Archive Historian Data
Need to archive historian data at 5am every day to generate daily report. although we set the start time at 5 am the archiving is starting at 12am next day. Then with historian data i want to generate daily report so I'm using function to generate the
Load Management in zenon Energy Edition
Dear zenon support team, We would like to implement a Load Shedding in distribution electrical system (IEC 61850 protocol mainly). Is it a suitable solution to use Load Management module in zenon Energy Edition in order to fulfill this need? The manual
screens/variables won't update
Hi, I am facing an issue with my zenon 7.5 installation. Screens and variables in my project don't get updated in the runtime/operator view. It seems like zenon is not communicating with PLC. The zenon operator/runtime screen keeps displaying last read
AddIn Nachkommastellen einer Variable ändern
Hallo an alle, ich versuche gerade die Nachkommastellen einer Variable in der Runtime zu verändern. // Test Nachkommastelle var wert = context.VariableCollection["Panel.Sensor.Si_Nachkommastellen_vv"].GetValue(0); IVariable tarVar = context.VariableCollection["Panel.Sensor.Sr_Istwert_vv"];
Borderless labels
Hello, I recognized that many screen elements differ quite a lot in availability of some visual proerties, like transparency, background, border and so on. For most I managed to find a workaround, but for some I'm stuck. For instance some picture specific
OPCUA32: Failed to evaluate data types
Hallo zusammen! Ich versuche über den OPC UA Client Treiber mittels "Variablen vom Treiber importieren..." Variablen von der Steuerung zu importieren und bekomme eine Messagebox mit folgendem Texte:[INDENT] Failed to evaluate data types at 'opc.tcp://192.168.3.85:4840'!
Tooltip ETM
Dear, I can`t activate option on ETM screen/Diagram window -> Runtime/Display tool tip When I click to activate this option in editor, Help window is opening always, and nothing is happen. Can somebody what is the reason for this behavior of editor (Version
webclient mit multiplescreens und windows 10
Hallo zusammen, wir nutzen zenon aktuell in Version 7.60 mit Webserver und -clients. Einer unserer Clients (der wichtigste) hat zwei Bildschirme. Dort wird aktuell zenon mit dem Tool MultipleScreens genutzt, um das Projekt auf beiden Bildschirmen im Vollbildmodus
Font size in Project Manager view
The size of the font used to display the Project hierarchy in the Project Manager has suddenly gone so small we cannot read it, all other views in Supervisor are showing normal sized fonts. Is there a System setting or .INI file we can edit to enlarge
WPF Error during loading XAML file
Hi! Sorry, if this topic is not in the appropriate section. I am trying to create a WPF element according to WPF manual (point 5, page 23). I have already created a XAML file with no code behind and a .dll, then imported them into zenon (respectively
Commands screen actions not going in CEL
Hello I have an issue where commands (OPEN/CLOSE Breaker) requested and executed from Command screen are going in the Chronological Event List but the operator which have requested the command is not showing in the CEL. Other events executed from the
Modbus (MODRTU32, MODBUS_ENERGY) communication with ABB AC500
When communicating with the MODRTU32 or MODBUS_ENERGY Driver in zenon with ABB AC500 devices, under specific circumstances the device aborts the TCP Connection to the driver. Specific circumstances could be the following: Several Routers (hops) lie between
Setpoint Tracking and Alarms
I would like to create an alarm by comparing two variables. One variable is a setpoint and the other is the measured value. Whe the two variables are not equal to each other, an alarm should be triggered. The multi-numeric reaction matrix I thought would
Zenon worldview screen move center
Hi forum, I am asking too much questions nowadays, sorry for that. For large size screens, ı am using move center function to show whole screen elements on screen switch buttons. I notice that when I click on the screen switch buttons, first it ıs showing
Combined element problem
Hi dear experts, In zenon I am using adp driver for redundancy. On the first initialization of zenon, adp driver cant take datas from field drivers (Iec101). So the combined elements are invisible during this stage. In combined element there is a default
Zugriff auf den Grenzwerttext einer Rema
Hallo, ich möchte in einer ProjectWizardExtension auf einen bestimmten Grenzwert einer Variablen zugreifen und diesen dann in eine andere kopieren. Soll heißen: In einer Integer-Variablen wird der Wert 15 reingeschrieben-> Der Grenzwerttext von Position
Errors logged for zenNetsrv
Hi all, in a network project, when the PC client has logged several errors for zenNetsrv it is possibile to increase the Network timeout settings in zenon.in, or it not solve the problem? now there are these default settings: [Netz] TIMESYNCH =0 USE_ENCRYPTION=0
zenon enrgy edition runtime license
Hello I would like to know the difference beween runtime server license and runtime client license for zenon energy edition. version 8.00 Thank you This is a migrated post! Originally posted on 29.03.2020 by user syous. Please be aware that information
Communication Details of IEC60870-5-101
Hi dear experts, For IEC-101 driver, I need to show communication status of devices. At zenon editor creating new variable, there is option for plc marker or communication details. I have created variables from predefined variables for communication details,
Next Page