Error file in RT
Creating file "D:\...\RT\FILES\zenon\system\verriegel.cmp" failed! May i know which is related to this error in RT, if anyone faced this, please share your thoughts. #verriegel.cmp file error
Verbindungsprobleme
Hallo zusammen, ich bekomme beim Verbinden von Zenon mit einer Siemens 1500 SPS leider keine Verbindung zustande. Der Treiber ist scheinbar richtig konfiguriert (Modus: Hardware und IP-Adresse eingestellt). Der Error im DiagViewer lautet: "Error Timeout
Hotline Tag Comments in the SOE
Hotline Tag comments are not being added in the SOE comment column.
Unhandled Exception Occured!
Hi, in our company we use Zenon 7.6 and all computers have the same error, after we install it on a new computer it works for a few hours and then this error appears again. we have already installed the visual update ´(Microsoft Visual Studio 2015-22
Dynamic Animation for Primary and Secondary Server
Hello Copa Data, I have a requirement that the dynamic animation to be shown for the Current Primary and Current secondary. As these two system variables are STRING Variables, How can i achieve this? Regards, Raja
Alarm Sounds
Hi, I would like to play a continuous wav file when any alarm in a group has alarmed. I have done this by a function, but when the alarm is acknowledged or there is no alarms present in that group I would like to turn the wav file off. Graham:rolleyes:
Message Control - Can't send message via gmail
Hello, We tried to implemend sending message via google smtp server. Diagnosis viewer sends message: The Server did not send an OK-Response to the PASS command: -ERR [AUTH] Username and password not accepted It seems that google have some strict rules
WVS Trend Scanning
Hello, is it possible to scan the values of a curve in the Web Visualization Service (WVS) as it is in the HTML Web Engine? HTML Web Engine WVS I am looking for a solution like this since the cursor output list is not working anyway in WVS.
Login error with correct credentials
Initially it was working fine, but after updating password it is not working now with correct credentials. Although "Do not generate and transfer is unchecked".
How to simulate the Variables from HMI
Hello Everyone, I am using Zenon 14. I remember in earlier versions, when you want to simulate the signals in "Simulation-static" mode. You can easily do it in Variable Diagnosis Viewer like New value can be written "Write set value". But now I am not
Zenon 5.50 SP7
Hi, I have an old HMI here that I just don't want to throw away yet. it runs on Zenon 5.50 SP7 is it possible to alter the old program to see if it can run a smaller not yet automated machine? if so what workspace or program do I need.
Automatic Line Coloring (ALC) Stopped Working
Greetings, I have a project that has a big SLD and I'm using ALC. Suddenly today the ALC just stopped working meaning that lines are not changing color even though nothing has been changed regarding SLD's. Is there a ALC Service or a way to check if the
Zenon 10 Installation Build 81649 - TcSysUI.exe - System Error
Hi, During the installation of a Zenon i see a Popup with header "TcSysUI.exe - System Error" "The code execution cannot proceed becouse mfc140u.dll was not found." I did read about this and it is apparently becouse of a C++ Redistribudable. I don t have
SETSTRINGKBD screen and Caps button?!
Hi all. I'm use SETVALUEKBD screen from PharmaHMI APP set (zenon 8.20). On default keyboard screen all letters are UPPERCASE. When Caps button pressed all letters stay UPPERCASE. Is there a way to change it to LOWERCASE?! It is very important for operator
Login Page
Hi everybody, I am trying to make a Login picture in which when I press the 'Ok' button after entering username and password, it should lead me to another picture (of the same project). One way of doing it is through REMA, make a system variable 'User
License Manager not getting start
Hi, I wanted to return Zenon supervisor and Report engine license from one of our VM. Because of some security reason we are getting rid of those vms but I am not able to start license manager. I can start editor runtime but there is issue with license
How to check the Invalid time stamp of the Variables in AML/CEL
Hello, I want to know that how can I check the Invalid stamp of the variables in AML/CEL. If the variables generating from device loose the time synch with SNTP Master Clock? I am using IEC61850 driver. Thanks, Raja
HTML page browser used Zenon 10
Hi all, How can I set the browser used for the HTML pages as it seems to only use IExplorer? I am trying to access to a web service of a device. Thanks
Driver: Intern - Driver for internal variables
Hallo, I've successfully configured a client-server SCADA model using Zenon 12 Energy Edition for a substation. The server-side functions as expected, with the alert icon flashing appropriately when alarms occur. I'm using an internal variable named "Alarm_Area_Status"
Create report in report engine
Hi Everyone I have a license key for 'Report Engine, Data Hub, Identity Service' so is that enough data and conditions to create a report on the report engine that other parties can access to create reports? Thanks for
Network service with COPADATA PRP
Hi, I have problems with ZEE12 network services for redundancy or client-server configuration (which use network service), but ONLY when i use COPADATA PRP. Using the same project, without PRP or using SEL PRP driver, we DONT have any issue. In other
Zenon Process Gateway - OPCUA
Hi, I have observed that the PG OPCUA Server publishes values rounded down to the nearest whole number. For instance, if an integer variable has value of 13.4 in zenon, it would be represented as 134 in zenon logic(which make sense because it's INT value
Filter variables in Report Viewer
Hi everyone i use 'historian' to store data of multiple variables then use 'report viewer' to export report but my problem is i can't select desired variable list to export report i did it by using multiple functions to filter variables in 'data sets'
Lot filter in Report Viewer
Hi everyone i have some problem with my Report . I want to filter Report by Name so i used Lot filter in Report function like a bottom picture But it doesn't seem to work and i can't figure out why Can you pick me an ingredient that can't be made?
¿Cómo puedo configurar el Service Engine para que maneje correctamente los datos de medición en zenon?
Estoy buscando información sobre la configuración óptima del Service Engine para asegurar que los datos de medición se manejen de manera eficiente. ¿Alguien puede proporcionar una guía o algunos consejos útiles?
[FEATURE] S7TIA Driver - Access separate bits of a variable in Zenon
[FEATURE] S7TIA Driver - Access separate bits of a variable in Zenon P.S. If you find this feature useful, please copy and paste this post into an email to your local support team. The more requests they receive, the quicker it may be considered for
Restoring of zenon backup
Dear Support, Can u please confirm, if we can restore zenon backup from runtime. We have zenon service engine running, and we want to modify the backup. Unfortunately we do not have the project backup. Is ther any way project backup can be restored?(Version:
Linux Operating System
Does Zenon Scada run on Linux operating system? If Zenon Scada runs on Linux operating system, what are the requirements?
User name is not appear in CEL
Hi Guy I have problem with my CEL when i choose Logging in CEL then information about the editor will appear but when i choose Limit values in CEL , information about the editor is not appear How can i fix that ? Thanks for help
User name or User full name in CEL
Hi Everyone I want to display the text as I want on CEL so I use 'Limit value text' but it doesn't show the username like when using 'Logging in CEL' can you tell me how to fix it ? thanks for the help
ZENON 7.00 SP0 BUILD 7
HELLO I need the version zenon 7.00 sp0 build but I idn't found it in the download plateform. could you help me please.
User Information Updating Problem
Hello, The Zenon version I use is "Version 12 Build153415 64Bit". I'm having a problem with users. When I add a user to the project I created, I can log in with him/her. But when I try to log in with a certain number of incorrect information (I set it
[FEATURE] Calculated value "DELTA" for historian aggregated archives
Feature request to implement a "DELTA" calculated value for historian aggregated archives, representing the difference between MAX and MIN. This would make it possible to display data such as energy consumption (water, gas, electricity) or machine running
Filter Recipe value table by Variable
Hi guy I have some problem with my filter recipe group I want to choose Recipe group name and recipe name by String Variable ( internal ) I am setting like the picture below but the filter doesn't seem to work and the value of the variable is limited
Logging of PLC signals in CEL
Hi Everyone, i have some problem with my CEL When i Change Value in my PLC , Variable still can be Read/Write but Can't update data in CEL , so How can i fix that? thanks for help!
[FEATURE] Setting variable values bitwise via function and button
Function and Button to set variable values bitwise, not just by decimal value. This functionality is standard in the PLC world, where setting a variable bit by bit is essential. For example, consider a control word for a motor. If you want to change only
Alarm shelving
Hello, How can create alarm shelving with activation and deactivation in runtime without depending on the time setting (Shelving duration). Kindly help me to find the solution.
[FEATURE] Invert Boolean value
[FEATURE] Invert Boolean Value Add the ability to invert BOOL values from the PLC in Zenon. Although there is an existing built-in option to adjust values for other datatypes (INT, DINT, etc.) using VBA functions, this option is currently disabled for
[FEATURE] Service Engine - Copy/Export values from tables
Hi, It would be convenient to have a feature allowing us to copy values from table window(AML,CEL,VariableDiagnosis,ExtendedTrend....) directly. Often, when investigating AMLs or CELs, you can't to copy and paste data from Zenon in anyway. Currently,
[FEATURE] Service Engine - Ignore casing
Hi, How can the Service Engine be configured to ignore case sensitivity when using filters? For instance, in the Filter Row for AML, CEL, RGM, Archive Revision, etc. Currently, if there's a case mismatch in the characters, searches return no results.
Next Page