Probleme beim Umstellen des Treiber für Kommunikation mit Beckhoff, TC ADS Communication Library
Hallo User! Ich beschäftige mich erst seit kurzem mit Zenon. Nach ageschlossener grrafischer Visualisierung bin gerade dabei Variablen der Beckhoff-EtherCAT-Steuerung in die Visualisierung einzubinden. Leider kriege ich die Umstellung des Variablen-Treibers
Profibus FMS Configuration Help
Hello! I have to set up communication to Siprotec devices via Profibus FMS. Simatic CP 5613 card is installed. Simatic NET PC Software is also installed. Communication DIGSI<>Siprtotec via FMS is OK. To set up FMS communication in Zenon/Sicam230 a configuration
SIMUL32-Einträge in zenon6.ini
Hallo, ich habe gerade ein Verständnisproblem zwischen der Treiber-Doku des SIMUL32-Treibers und den zenon6.ini - Einträgen bei zenon 7.0: laut Treiberdoku finden sich die zu diesem Treiber gehörenden Einträge unter den Abschnitten [SIMULATOR] und [SIMULATORTREIBER].
Backnet driver
Hi all, Regarding Backnet driver, (zen 7.10) while communicate with device via backnet driver, the communicate is not working after several hours. but connection is ok. important thing is that it could not recommunicate. it may lose a communicate between
Simotion Verbindung
Sehr geehrte User! I hätte ein paar Fragen zur Anbindung von Zenon 6.51 zu einer Siemens Simotion. 1) Gibt es eine Möglichkeit auf die Alarm-S Störmeldungen auf der Simotion zuzugreifen? 2) Kann man nur über die *.sti Datei kommunizieren? Wenn ja, muss
S7TCP Driver IP Address
Hi, Is there a Driver Variable or other means to display the Driver's (Primary) IP Address? Thank you This is a migrated post! Originally posted on 04.07.2013 by user ronmany. Please be aware that information can be outdated.
Kommunikationsproblem mit ModBus TCP
Hallo zusammen, ich versuche vergeblich, einen Energieanalysator Typ UBN400E-IT der Firma Berg Energiekontrollsysteme über Modbus TCP auszulesen. Bisher habe ich Siemens FactoryLink verwendet und keine Probleme mit der Kommunikation gehabt. Doch unter
WinAc + Zenon
Hello I try to setup comunication between zenon on siemens panel 677 and winLC RTX on remote PC whitout luck My WinLC RTX hardware is rack (0) PC 2 WinLC RTX 3 IE General card On Zenon i have interface S7 TCP-IP setup Net address 0 Connection name XXXX
Driver configuration file
Hi, we change often the IP address(communication between SCADA-PLC). We create a button that call configuration file(IEC870_IEC 60870-5-101_104.txt) and the operator can change the IP address. Of course we write that the new IP will take effect only after
How to start and stop driver simulation project from runtime?
Hello, colleagues In Editor there are 4 modes for driver configuration. I used driver for IEC60870-104 protocol. I use Straton for driver simulation project and in driver configuration I select mode “Simulation-programmed†for this case. It work well.
DNP Driver Error...
Hello Support. During My testing I got the following Error (Shown in attachment) while starting the Runtime. And these error will not be there .. if i uninstall and install the whole zenon again. then It work Fine. Can Anybody advice, why that error comes
Zenon Modbus TCP connection to phoenix ILC
Hi, I am trying to connect a phoenix ilc 191 with a suetron windows CE panel running Zenon. The controller can act as a slave and i can write or read coils and registers. I use the Zenon modbus rtu/tcp driver to be the master. The problem is that in the
Add a variable type 'byte'
hello, I have a value of the type byte stored in my datablock. I'm working with siemens step7. Now i want to have this value on my screen. But when i want to add this variable i cannot choose the datatype byte. I can see it in the sub-tree 'datatypes'.
Beckhoff BC-BK9000 - Problem beim Lesen von Variablen mit Merkerbyte > ca.800
Hallo, habe folgendes Problem: Sobald ich in irgendeinem Bild in der RT (7.00 SP0 Build2) ein Element (z.B. Zahlenwert) mit einer Variablen verknüpfe, die auf eine Beckhoff Steuerung zugreift und deren Offset > 800??? beträgt, sind plötzlich alle Variablen
PSC7 style faceplates in zenon SCADA
Dear Sirs, I apologies if I ask obvious questions. I am coming from SIMATIC WinCC World and I am not experienced (yet) zenon user. We are at quotation stage with one of our clients. On it's site SICAM 230 SCADA software (which I believe it is zenon v6.51)
String in Byte-Array
Hallo, gibt es eine Möglichkeit, einen String in ein Byte-Array umzuwandeln ? Ziel ist es, aus einer Namespace-Stringvariablen eines OPC-Servers über die Zuweisung zu einer Modbus-Variablen (kein String möglich!) zu kommen. Danke im vorraus This is a
How to debug driver simulation projects?
Hello, colleagues! In my test project there is some zenon Logic project (let it be named NG_PROJECT) connected to zenon with STRATONNG driver. In hadware mode of STRATONNG driver everithing works well commands from commands variables goes through zenon
DNP3 Treiber Frage
Hallo, kann der zenon 7 DNP3 Treiber auch folgende Class 0,1,2,3 ? Ist nur pooling, oder auch spontan möglich ? Bitte um ein Beispiel der Adressierung von Bool und Real Variable. Class assignment Configuration Description None Integrity class 0 scan returns
Catching Driver-specific Commands
Hi I'm trying to send a abritrary command to my driver through Zenon. Im trying to use: Function->Variable->Driver Commands->Driver-specific command But how do I react to the command in the driver? At the moment I get: verknüpfte Funktion existiert nicht
Treiberkommandos - Reihenfolge entscheidend?
Hallo, gibt es bestimmte Reihenfolgen, die zu beachten sind, wenn man Treiberbefehle zur Runtime mittels Button ausführen möchte? Konkret geht es gerade um den OPC-Treiber, bei anderen habe ich das Verhalten noch nicht beobachtet. Wenn ich das richtig
OPC-Client "invalid" mangels Wertänderung
Hallo zusammen, ich habe ein Problem mit einer OPC-Anbindung: mit dieser Anbindung wird eine Sicherheits-SPS abgefragt, die viele Alarm-Variablen enthält. Da die Alarme nicht gerade oft auftreten, ändern sich die Werte der zugehörigen Variablen entsprechend
Zenon v7.0 Modbus Slave PROCESS GTW Limitation for Integration Projects
Hello, In one of our Project, We have MB Slave - Master interface with the DCS where our Zenon7.0 is MB Slave and DCS is the MB Master. We have integration Project which have 3 Subproject. Zenon Modbus Process GTW does not function fully for the Integrated
Zenon v7.0 OPC Server Version
Hi, I would like to know which DA Version(s) does Zenon OPC Server Support ? Thanks DJ This is a migrated post! Originally posted on 01.04.2013 by user daujivar. Please be aware that information can be outdated.
Communication Error
Dear Support I have two redundant servers (primary and standby) in control room that receiving data from 5 workstations at substation level with IEC 61850 protocol .Server communicate with DCS system via OPC protocol .I received communication error on
Beckhoff TwinCat NG driver -> Red square
I am having the set of machinery running at the downfloor. I would like to create a summary diagnostic screen which will give a brief owerview of the statuses of all machines. Each machine runs at Beckhoff1020 CX and having dedicated IP adress. Below
WAGO PLC - on Zenon 7 - what drivers are needed?
Dear forum We use Zenon 7 to visualise our building automation systems. It mainly consists of Siemens S7 PLCs and and a number of KNX installations. One of the cooling system, however, comes with a WAGO PLC, 750-842. CoDeSys 2.3.9.7 was used to program
Adressierung von Variablen aus Siemens S5
Hallo! Ich darf gerade ein bestehendes Leitsystem auf zenOn umrüsten und stehe vor einem kleinen Problem was sie Adressierung von Variablen in S5 Steuerungen an geht. Als Grundlage habe ich die Konfiguration der Variablen aus den INAT-OPC Serveren, die
Sql Driver Problem
Hello, I have a problem with Sql Driver and redundant servers. when only main server is active, sql driver works normally but when standby server is turned up, the variables from sql driver turn into invalid values. in the driver settings, i tried both
Modbus-Variablen nacheinander statt gleichzeitig abfragen
Hallo, gibt es eine Möglichkeit, innerhalb von zenon 6.51 dafür zu sorgen, dass verschiedene Variablen des MODRTU32-Treibers nacheinander abgefragt werden und nicht gleichzeitig? Hintergrund der Frage ist: ich habe ein Gateway, das mehrere ModbusRTU-Kanäle
project data base driver C damage! how to recover database?
Dear Mr. or Ms: I have a big problerm: I generate the project database in Drive C: of my loptop, after some days, my laptop driver C was crashed, luckly is i copy the folder (zenon_Projects) out from driver C. the question is how to make this folder back
Unhandled exception during variables download
Hello, I am quite a new Zenon user and I currently started creating project for visualisation with Beckhoff CX1020 PLC. Everything is going well, until I'm trying to download variables from the controller. I'm entering AMS Net ID, port and I'm connecting
OPC AE and Zenon
Hello! We need to use Zenon as OPC AE client. Is there such ability? if not, may be some workaround exists? This is a migrated post! Originally posted on 15.11.2012 by user stolyarov_as. Please be aware that information can be outdated.
Verbindung zur Bachmannsteuerung
Hallo Support, Da bei uns hauptsächlich mit Bachmannsteuerungen gearbeitet wird und wir als Leittechnik Zenon besitzen muss eine Kommunikation zwischen beiden installiert werden. Die einfachste Verbindung dachte ich, wäre der Bachmann M1 Treiber, der
Extended trend with opc-variable
I try to use extended trend with archive. First, I set up the archive. The archive contains one variable from the opc-driver (opc-variable name: @PBuilding.@SLocations.@DF10_Vent.@OHwInput12.@NnvoTemp4_val.@FSNVT_temp#SI). If I use this variable then
M-Bus auf Ethernet und mit M-Bus Treiber Zenon
Hallo zusammen, wir wollen Genre über einen M-bus-Ethernet-Gateway (Wachendorff) über den M-bus-Treiber (Zenon) Implementieren. Hierzu würden wir ein Gateway von Fabrikat Wachendorff Benutzen. Da der Zenon Treiber für M-bus eine COM-Schnittstelle braucht
Beckhoff BC Buscontroller Treiber - Performance Problem
Hallo, Ich setze gerade bei einem Projekt den Beckhoff BC Treiber ein. Wenn ich jedoch per Zuweisung mehrere interne Variablen(ca. 50) auf die Steuerung schreiben will, dauert das ca.35-40 sec. Dasselbe funktioniert mit einer Vipa SPS und dazugehörigem
OPC Client configuration
Dear support, I'm a new Zenon user, and I hope this is the right place to write. I've started using Zenon for importing some Wit RTU with an OPC Driver. I've noticed that OPC is a bit hard to configure, but I've got a problem that you may solve. I've
OPC Client configuration
Dear support, I'm a new Zenon user, and I hope this is the right place to write. I've started using Zenon for importing some Wit RTU with an OPC Driver. I've noticed that OPC is a bit hard to configure, but I've got a problem that you may solve. I've
DNP Analog Inputs
Hi, I have DNP driver and it is communicating properly with the devices :). But am not getting the fractional values for Analog inputs (real) from the slave. Even i configured the number of decimal points as 2. TIA This is a migrated post! Originally
Readout comtrade file
Hi Does zenon now is capable to retrieve waveform/harmonics data from relays in comtrade file ? Brgds. This is a migrated post! Originally posted on 06.08.2012 by user skywalker. Please be aware that information can be outdated.
Next Page