Recent Topics
Run time is not getting started
Hello, While starting runtime ,below popup message is coming and runtime not starting. Looking forward for your reply. Exception in Wnd=0x000B0464(Zenon Supervisor) processing message 0x04F9. IParam=0x99740888 wParam=0x99740672 Regards, Nikhil This is
help with creating variables zenon 6.51
hello, today I tried to create some variables in zenon and couldn't get them working Under variables section in project tree I created as usual and when transported and reloaded project, the variables were created but didnt change, like there was no communication.
Zenon 7.60 Scheduler problem changing switching time in Runtime
Hello everyone, I'm experiencing a problem with the Scheduler in Zenon 7.60 Runtime. I can create a schedule, but once the switching times of the switching points are set, they can't be changed. Double click switching point, change the switching time
Out of memory while starting editor
Hello , While I am starting the zenon editor 64 bit at that time the "OUT OF MEMORY" popup window will open continuously . And zenon editor shows "stopped working" What is the exact issue? I'm using zenon 7.50 Looking forward for reply. Thanks in advance.
[SIPROTEC 5 7SJ82] Issue with command processing... even with command qualifier
Gabriel Simon [email]gabriel.simon@engie.com[/email] PS: I'm suing ZenOn EE 7.60 SP0 with Windows 10 Pro Server 64 bits mode PPS: I can send you a backup of the project if you want.[/FONT] This is a migrated post! Originally posted on 07.02.2018 by user
Version number error in Web Client
Hello, While accessing the SCADA from Web Client it shows the following error: "File 'templates.cmp' has version number 7.50 SP0-butthe project has version number 5.21 SP2!" Kindly suggest a solution. This is a migrated post! Originally posted on 06.02.2018
Alarm Acknowledge popup error
Hello, I am using Zenon-7.50, When i am acknowledging all alarm on Annunciator screen the same time I am getting one popup on Server screen. " You should enter comment in order to acknowledge the alarm!" Even i checked in reaction matrix "comment required
Runtimeservice Reloading - Event
Hallo ich habe das Problem, dass das Projekt reloading Event im Runtimeservice nicht ausgelöst wird. public void Start(IProject context, IBehavior behavior) { try { zprj = context; zprj.Reloaded += Zprj_Reloaded; zprj.Reloading += Zprj_Reloading; } catch
ZenAdminSrv not starting anymore
Hello, on a plant installed a year ago, my customer has a problem when starting one server. The message box "Waiting for service ‘zenAdminSrv" appears when starting the project. The message box does not disappear and the project never starts. I asked
Passing variables to an array by reference
Hi all, I want to group some variables from a PLC in an array so I can process them with the same logic by just iterating the array with straton. The problem is that when I operate the variables in the array the change is not reflected in the original
Checking ping to devices
hi everybody i want to make a function that sends ping to every device (switches,router,PC...) and shows in the zenon if there is a communication to that device or not. thank you. This is a migrated post! Originally posted on 15.02.2018 by user eden212.
Need step by step procedure (with image if possible) to use dongle Wibu-Key for Zenon 6.22 SP1 licencing
I have Zenon 6.22 SP1 Build 0 with Dongle (Wibu-Key). I have installed Zenon 6.22 and Wibu-Key V- 5.22 on Windows XP Pro 64 Bit. Wibu-Key software find dongle when plugged-in. Wibu-Key Server also stat having dongle specified information on status. But
Conditional navigation
Dear colleagues, I am wonder how can I implement manageable conditional navigation for pages. At the moment we have a set of buttons which are laid one over another one with controlled visibility property and each of them has screen switch function attached.
Alarms from a few projects at one alarm list
Hello, I am using zenon 7.60 version. In my application in the project tree I have a workspace which includes 1 global project, and 1 start project in which I have about 30 subprojects. The whole application contains the installation created in two factories.
ETM "Zooming" or "Zooming for Touch"
Hello, The ETM Starter Edition supports "Zooming for Touch", the ETM module supports "Zooming". What's the difference? Kind Regards, Hans van Zijp. This is a migrated post! Originally posted on 21.02.2018 by user hansvanzijp. Please be aware that information
Zenon HTML Bild einen WebClient öffnen
Hallo zusammen, wir möchten gerne einen Web-Client in einem Zenon HTML Bild öffnen. Beim öffnen erscheint immer folgende Fehlermeldung: The control cannot be started as the service ‚zenAdminSrv’ cannot be reached! Please start the service manager
Numerical value representation style
Hello Everyone, I have a plenty variables which stores a values from energy meters and other meters. The lenght of the displayed values is sometimes very long, for example "1092109 kWh". Im asking You if there is a possibility to show the values with
global_vars Einstellung für Redundante Server
Ich habe beide Server in die global_vars eingetragen // Please enter here the computer name, on which the zenon Runtime is installed and on which it is actively running // For redundant Runtime servers, please enter both "server1;server2" var RUNTIMESERVER
Spaltengröße Rezeptwerttabelle
Guten Tag, wo lässt sich die Standardgröße der Spalten in den Rezeptwerttabellen ändern, so dass sie zu der Länge meiner Variablen passt? Wie man im Anhang sehen kann, sind die Namen meiner Variablen sehr lang und werden nicht komplett dem Benutzer angezeigt.
Polling Analog values each 1 second using DNP3.0 Protocol
Hi, We need pool Active Power and Frequency from a SEL-735 meter (Schweitzer) using DNP3.0 or other protocol with time stamp. Our client ask us to save data each 1 second (no by deadband). Could be possible with ZEE using DNP3 or another protocol (IEC61850,
"fpm.cmp" error
Hi I have a computer has install Zenon 7.50 runtime. Last time I use Zenon Editor 7.50 to config system, now I use Zenon 7.6 to config and compile/create runtime for 7.50 But I have a error :" If I change to create runtime for default (7.6) . I do not
establishing connection
hi i'm using zenon 7.6 with abb ac500 plc's, i have 1 driver of 3S_V3 with 20 controllers. in the office i have only 1 or 2 plc's, when i check the programs, every time i open or reload the runtime it takes forever to establish connection to the plc.
Integration of Alstom relays
Hi Support, Its possible integrate Alstom relays (like BM9100 or KMPC130) using K-BUS or another Alstom protocol?. Thanks in advance for your support. Regards, Jos© Luis Torres This is a migrated post! Originally posted on 18.04.2018 by user jose.torres@indexum.com.
Timestamp variable
Zenon is receiving data in DNP3 and after that It generate a report in the report viewer. The value of the time stamp that comes from the device is required in the report. How could I get it to show up in the report viewer report? Or how could I separate
Mit Button und Makro ein bestimmtes Bild öffnen.
Hallo, Ich habe mir 2 Buttons erstellt die übereinander liegen. Die Sichbarkeit der Buttons wird über die SPS gesteuert. Funktioniert ohne Probleme. Der untere Button wenn er von der SPS freigegeben wird soll mir ein bestimmtes Bild aufrufen.(Bild heißt
How to force webclient in to 64bit
Can someone help, Due to the large number of variable in a project circa 500,000 I receive "out of memory errors" using 7.60 webclient. I start the runtime in 64bit mode but all the webclients try and connect in 32bit mode. This is a migrated post! Originally
Change user authorization system screen
Hello. I have a problem. Does anybody know how to change this system screen? (In attachment) It showns when i try to change value in dynamic text element without authorization. I need to change language in this screen or try showns another screen. //
Visibility from 2 variables
Hello, Is any posibility to make a visibility depends of 2 different variables? Current status I have: -variable "Pos[BVAR]" where BVAR is changed for 10 positions (10 different blocks of HMI) -graphic with visibility from "Pos[BVAR]" (graphic is visible
Coloring like lines
Hi, I am using Zenon Energy Edition 7.60. I want to color any shape exactly like Line with using ALC. There is option to check "color from ALC "box for Line Properties , altough being same option for other shapes I can't use it. What should I do for coloring
ProjectServiceExtension Stop() - Freigeben verwendeter Ressourcen
Hallo, ich implementiere ein AddIn als ProjectServiceExtension und erzeuge im Start(..) einen Container für OnlineVariablen und Registriere hierzu ein Event. context.OnlineVariableContainerCollection.Create(AddInOnlineContainer_name); Beim beenden des
Mathematikvariable Wird Beim Nachladen Auf 0 Gesetzt
This is a migrated post! Originally posted on 26.04.2018 by user fineleric. Please be aware that information can be outdated.
World view frame
Hi, Is it possible to open a worldview screen with 0% zoom? I have a screen for world navigation with a size of 4400/2550. When it opens, it opens already with a 100%%zoom. Is it possible to changed that? This is a migrated post! Originally posted on
ProjectServiceExtension - Registrieren VariableChangeEventHandler
Hallo, ich implementiere ein AddIn als ProjectServiceExtension und verwende einen Container für OnlineVariablen. Hierzu möchte ich das Change-Event nutzen. AddInOnlineContainer.Changed += Leider gibt es den aus VSTA bekannten Eventhandler nicht im AddIn.
Report Viewer-Ansprechen der letzten Zeile in der vorherigen Reihe
Guten Nachmittag, Ich habe mit Report Viewer eine Matrix erstellt, wo ich Werte nach Uhrzeiten und Datum anzeige. Allerdings möchte ich bei "00:00"Uhr den letzten Wert der vorherigen Reihe anzeigen lassen. im Anhang befindet sich ein Screenshot der Tabelle
make runtime slow
Hi Team, I have Central monitoring system (CMS) & 4 plants (projects) integrated to it and each project has 3000 tags of event/alarm data that need to be archived. If I add all those tags, Runtime in CMS response slow. Can you guide for a solution? This
Message in unhandle exception
Hi I have a problem log /2/2018, 10:16:06 AM zenOn Version: 7.60 SP0 Build36068 Processor: UNKNOWN //----------------------------------------------------- Exception code: C0000409 The system detected an overrun of a stack-based buffer in this application.
VBA for command prompt
Hi I need a VBA code to call multi command in telnet in Zenon Ex : Call cmd.exe Call Sendkeys ( Telnet x.x.x.x) Wait time... Call Sendkeys (Enter) .. Call User Call Password But It can not work , It stop in Dos window and not send and keys after click
zenon 7 runtime mit windows 10 kompatibel?
hallo, ich möchte näschte , ein Runtime von einem im zenon 7.0 sp25 entwickten projekt mit Windows 7,in einem industry PC mit windows 10 installieren, wird es zu kompatibilitätproblem führen??? mfg This is a migrated post! Originally posted on 02.05.2018
email-nachricht aus dynamischer Grenzwert
Hallo, ich arbeite momentan auf einem projekt mit zenon 7.0 SP0 build 25. Ich hätte gerne zwei alarm emails bekommen. 1- email sollte die grenzwerte ( alarmliste ) von mehrere variable ( 3 ) enthalten . versuch : ich habe eine funktion ( mit sende nachricht
Error while runtime creation about variables which doesn't exists in database. Help is required to solve this error
Dear Team, Error while runtime creation about variables which doesn't exists in database. Help is required to solve this error. This is a migrated post! Originally posted on 04.05.2018 by user saravanan1985. Please be aware that information can be o
Next Page