Recent Topics
'œTime Stamp Issue in Zenon Runtime'
Hi, We want to show OPC variable with external timestamp in Zenon runtime, however, OPC driver is not listed in drivers which are taking care of status bits and data/time stamping. On the other words, when we receive a variable and it's corresponding
problem s7tcp32 driver problem when adding new variables
hello, I have added new variables to existing project of s7tcp communication driver. (zenon ver 6.51) I have added a new DB to the plc, and new variables are directed to this new DB. When I load to the screens a small red rectangle appears like there
Showing popup user32.dll
ZenRt32.exe Entry point not found , the procedure Entry point close touch Input could hand could not be located in the dynamic Link library user32.dll This is a migrated post! Originally posted on 17.07.2018 by user jarvis. Please be aware that information
UserChange() Event
Hello , i have a problem with UserChenge() event , when i change user in the runtime this event is not execute i don't know why . My code is below : Project_Active() = thisProject.Passwords End Sub [/FONT]_UserChange() MsgBox("it's working") End Sub [/FONT][LEFT]
SMS-Nachricht über SMS-Gateway
Hallo, hat wer Erfahrungen zum SMS-Versand über ein SMS-Gateway? Die Beschreibung in der Hilfe sind etwas dürftig, eine DIALOGS GmbH finde ich nicht. Wenn ja, welches Modem wurde verwendet? Welcher SMS-Server wurde verwendet? Was muss bei der Konfiguration
Alarmstatuszeile
Hallo, zenon 7.10 Ich verwende bei einem Projekt die Alarmstatuszeile. Nach einer Wartung des Servers, inkl. Einspielen aller Windows Updates, erscheint nun zusätzlich zur Alarmstatuszeile ein Fenster (Status) in der Taskleiste. Wie kann ich das wieder
Setting tool tip for multiple instance of a symbol
Hi . I have a symbol that is used in various places in project , and i need to set tool tip for each of them. I used a button with transparent background with tool tip enabled , but it will be shown for all instance of this symbol and i can't modify it
Logic, a loop for an array with type variables
Hello, I have a type BatteryInRack: Voltage: real; Ready: bool; and a type BatteryRack: Battery1: BatteryInRack Battery2: BatteryInRack Battery3: BatteryInRack ... I have in Logic a variable: BatteryRack: BatteryRack I try to assign a value to the Voltage
Styles content is not visible in Zenon 7.60
Hello, Please find the attached screenshot, STYLES are present but not visible. Please suggest the settings regarding it. Regards, Rahul. This is a migrated post! Originally posted on 11.05.2018 by user rahulindore05. Please be aware that information
Kurvenreihenfolge In Trendbild ändern
Hallo zusammen! Ich suche eine Möglichkeit um die Reihenfolge der Kurven in der Kurvenliste von Trendbildern zu ändern. Die Bildumschaltungen, die die Bilder aufschalten und die Trends parametrieren sind schon vorhanden und fertig. Jetzt soll aber die
SICAM 230 Editor Licence
Hi Team, I am facing issue with SICAM 230 Editor licence. I have a Wibu key [Dongle], Licence sheet, Serial 7 , SICAM 230 Key7 , Activation Key 7 placed in zenon6 ; C:\ProgramData\Siemens\System My licence below; ACTIVATIONKEY7=2XXXXXXa SERIAL7=8XXXXX1.101006.8.0
email-nachricht aus dynamischer Grenzwert über smtp
hallo , ich möchte eine email aus dynamischer Grenzwert über smtp senden . zudem sollte dies auch in der alarmmeldeliste angezeigt werden . Problem: Wenn die variable verletz werden , werden sie nur in alarmmeldeliste angezeigt , und werden keine email
Remote: Reload project do not works
Hi boys! Any ideas why "Remote: Reload project" toolbar button do not works on some WSB and works well with other ones? On a WSB where reload project failed "Remore: Close runtime/Start runtime" tool bar buttons work as expected. All projects are set
Quittieren von Alarmen per Doppelklick deaktivieren
Hallo zusammen Ich benutze Zenon 7.20 SP0 Gibt es eine Möglichkeit das Quittieren von Alarmen per Doppelklick zu deaktivieren? Die einzelnen Alarme müssen selektierbar bleiben. Einstellungen auf dem Bild und auf der Alarmmeldelist für Doppelt-Tippen habe
Berechtigung für Quittieren in AML und Statusleiste
Hallo, ich versuche gerade vergeblich das Quittieren in der AML und auch für die Alarmstatusleiste einzuschränken. Ich würde das Quittieren gerne nur einem Benutzer erlauben. Dazu habe ich folgendes gemacht: -Im Global-Projekt den Benutzer angelegt -Dem
Reg: DPC Testing with varibale daignosis
Hi Team, Thanks to all your support in forum. I have a iec850 device which has double point. How can i test in varibale diagnosis. Simply adding variables will work or Do I have to create anything to test. Regards Sarav This is a migrated post! Originally
DiagViewer: CT-type definition corrupted
Hi guys, The zenOn Diagnostic Viewer shows my the following error text when starting the straton runtime on my PC: >>> Project 'myProject': Expanding complex type for 'myVariableStruct' failed. CT-type definition corrupted. The variable myVariableStruct
Webserver findet Lizenz nicht mehr
Hallo zusammen, woran kann es liegen, wenn der Webserver mitten im laufenden Betrieb plötzlich seine Lizenz nicht mehr findet? Während dieses Betriebs wurden keine „nderungen an der Hardware vorgenommen und keine Updates installiert. Der Webserver geht
Create dynamic Alarms via API
Hello, im looking for function to create various Alarms via API, is it somehow possible? Also i want to remove those alarms after acknowledgement. Thank you! This is a migrated post! Originally posted on 17.05.2018 by user keelektronik. Please be aware
import data from csv to sql
Hello, Some time ago, we had a zenon supervisor version 7.20 running and archiving data. The data was stored as csv files. Later, we changed to sql evacuation. Now, we are running 7.60 and the customer ask us to insert thee data that is in those csv.
LON-Treiber für OpenLNS?
Hallo zusammen, wie ist denn bei zenon 8.0 der Stand in Sachen LON-Anbindung? Geht der aktuelle Treiber auch mit der aktuellen OpenLNS-Version? Der letzte mir bekannte Treiberstand konnte das noch nicht, und die Treiber-Info auf der Support-Seite scheint
ALC Function Type (Switch,Disconnector)
Dear, I am SCADA engineer who is new in zenon using v7.60 . I have a question related to Automatic Line Coloring (ALC) Function Types switch and disconnector. When I choose Switch or Disconnector as a function type for a combined element, coloring is
Process gateway in redundant mode
Hi, I was wondering, how exactly am i suppose to configure process gateway to send all its values to a specific ip-address when i'm using it in redundancy mode? Our customer needs to configure the recieving end so that it looks at a specific ip-address
Group alarm characteristic
Hi, I am using combi element for alarms in Zenon V7.60. When value of variable is 0, color is green without flashing If value of variable is 1, color is red with flashing. I've created a group called "Trip-1" in Alarm/Event Group" and chose an Status
how to convert the content of a variable in decimal into an hexadecimal value
hi i would like to know how to to convert the content of a variable in decimal into an hexadecimal value This is a migrated post! Originally posted on 29.05.2018 by user mos89. Please be aware that information can be outdated.
message control : notification message in cel
hello; I'm using message control in a project and a noticed when message control is deactivated and when alarm which is configured to be sent as a message (sms..) the message "it was tried to send a message although message control is deactivated". is
Import DXF into Zenon
Hello i would like to import a DXF file into zenon or DWG. But i could not find any information. Thank you very much Best regards This is a migrated post! Originally posted on 05.06.2018 by user agustinomg. Please be aware that information can be ou
Alarme verschwinden in der Alarmmeldeliste
This is a migrated post! Originally posted on 06.06.2018 by user marilynliddell. Please be aware that information can be outdated.
Zenon Backup Opening procedure :-
Dear Users , I am new into Zenon . I got one old back up containing the following files :- 1 BINARY.ZIP 2 DB.INI 3 SQL.BAK Which software is needed to open this backup ? Waiting for the prompt reply ! Thanks SSM This is a migrated post! Originally posted
Convert Zenon project into Siemens ( Wincc / Wincc Flexible ) :-
Dear Users , In one of our machines we want to convert Zenon HMI Program into Siemens HMI Program ( Wincc / Wincc Flexible ) . Incase anyone has done so , please assist ! Thanks SSMANKU This is a migrated post! Originally posted on 06.06.2018 by user
canOpen coWriteParam function block
Hi i need to set up my canopen device manually, no way to store the configuration i need to write SDO via coWriteParam 1 need to write in 3 object, can i use 3 different instnace of coWriteParam to write at same time my 3 object ? do i need to write 3
SICAM 230 V7 Runtime Error
Hi All, I have problem with SICAM 230 V7 runtime, while I running the runtime an error are coming, it said that MSCOMCTL.OCX is missing, then I copied the missing file from another engine. But the error still appear. Error messages screen shoot are attached.
Simulate Zenon 6.22 Sp1 Scada on PC with realtime Siemens PLC :-
Dear Users , Is it possible to simulate Our Zenon 6.22 Sp1 Scada in Desktop PC with the realtime Siemens PLC on Ethernet ? Thanks SSMANKU This is a migrated post! Originally posted on 08.06.2018 by user ssmanku1699. Please be aware that information can
VSTA.zip not created with the changed runtime files
Hi, I have 2 problem with VSTA Editor with ProjectAddin. 1. Sometimes, when trying to open it, it simply won't open. A workaround for this was given by Mr. David Cerdeira, but it is only a temporary fix. "1. Open the project "HOHESEE_LV" editor files
Reg: Warning when using 7.11 project in 7.60
Dear Team, We are getting a warning when we used project of 7.11 in 7.60. Please refer attachmet screen shot Regards sarav This is a migrated post! Originally posted on 09.06.2018 by user saravanan1985. Please be aware that information can be outdat
How to activate Zenon license with dongle
I want to know how to activate Zenon 5.5 with dongle. Please give me step by step procedure picture. Thank you. This is a migrated post! Originally posted on 10.06.2018 by user duurbeen. Please be aware that information can be outdated.
sub program multi output value
hi , i would like to write a sub-program with multible outputs values, when i compile my straton program hi have an error, Variable, constant expression or function call expected This is a migrated post! Originally posted on 11.06.2018 by user mos89.
CE Button variable switch not working as toggle.
Hello, I have opened a past 7.50 project in zenon 8, which is running on a CE device however the project has variable switch buttons to toggle PLC variables which now isnt working. The button switch on the old project did toggle PLC variables. so far
Reg: Variables Will Impact Delay in Screen switch function in Runtime
Dear Team, Thanks for the support. We have around 26,000 variables defined in our project and the screen switch function is responses slow (even overall the navigation response with delay) compare to projects having less variables. Could you suggest any
How many servers/connections can be added in a single iec-61850 driver & how many such iec-61850 drivers can be in a project
Hello All, This is a typical question to know our limitation. So guys I hope I will receive an immediate reply pertaining it. 1) How many Server connections can be made in a single IEC-61850 driver. 2)How many maximum number of IEC-61850 drivers can be
Next Page