Sending SMS and EMAIL together.
Hello. I use MessageControl in Zenon 6.51. Now I want to send alarm message by SMS and EMAIL when variable value out of limits. I bundle functions of sending messages by mail and sms in one script and attach function of run script in the limit's field.
MessageControl sms log error
Hi, In zenOn log I find error messages of control module. Module: MessageControl Message level: ERRORS Name of source file: .\Message32\SmsHelper.cpp Function name: CComSmsManager::Connect or CComSmsManager::ReadSms I think I not have the message control
Fehler bei Redundanz-Umschaltung
Hallo, ich habe ein Problem mit Redundanzumschaltung. Ich habe zwei völlig identische Clients, dessen Projekt zwei Server in Redundanz haben. Die Funktion Redundanzumschaltung von einem Button aus funktioniert bei beiden Clients tadellos. Die aber (wichtigere)
Zenon client in OWS (Operator Work Station) not running from Server
I have a server client configuration two servers one master and one standby four client running successfully but one client no display any data only shows blue dot when i go to help it shows it is because of network error but i can ping the server from
Historian archive in server & client not same
Hi, My historian archive in my server and client is not showing the same thing There is some entry of variables are deleted in my client but server not showing. It cause my trending in client is not working for that particular archive This is a migrated
Message Control - Sprachnachricht mit GSM Modem versenden
Hallo! Ich möchte mit einem GSM Modem Sprachnachrichten versenden. Gibt es dazu bereits Erfahrungen bzw. eine Hardware-Empfehlung für das Modem? Ich habe die zenon Version 7.11 SP0 im Einsatz. MfG Dennis This is a migrated post! Originally posted on 28.09.2015
Server Client Problem
Good Afternoon, My runtime project will not run as a server, I have two machines with 7.2 runtimes installed. I can remote transport and run the projects fine, if I do not have the network active option ticked and primary and standby server defined. When
webclient auf 2 Monitore im Kiosk-Modus
Hallo zusammen, weiß hier zufällig jemand, wie man den Kiosk-Modus des Internet-Explorer dazu bringen kann, zwei Monitore zu nutzen? Nach meinem derzeitigen Kenntnisstand nutzt der IE immer nur den Monitor, auf dem er aufgerufen wird. Ich würde aber gerne
delay in redundancy
Hello , I’ m glad to tell you that redundancy had finally worked, but I have some problems with delays response, because when I disconnect the primary server, I must wait more than 30 seconds to visualize my states. In other hand, when I disconnect
redundancy problem in server
hello everyone I have this architecture please check this setting. and tell me is that it is correct or not thank you. This is a migrated post! Originally posted on 25.06.2015 by user hajjsaid99. Please be aware that information can be outdated.
SICAM 230 7.0 Server can not detect Client PC
Hello dear Copa-Data Team, I have 2 server and 2 Operator Working station (OWS) (Clients). Communication between OWS1 and servers are ok but problem is when I initialize the runtime from OWS2 any of the servers can not detect OWS2 as client. For this
Zenon 7.10 Client license
Hi everybody, I am new in zenon world. I just have a very simple question: Which RT license do I need for each zenon client in a redundant server/client environment with 10 Clients which are running all only one project with the hole variables of the
Redundancy errors
Hi all! Today i was editing my project, trasfering it to primary server and then press "Reload project" via remote transport. Then i noticed that my clients (2 computers) start to switch between primary/secondary server. And again and again....cyclically.
RT stürtzt bei Mailversand ab
Hallo Zusammen, ich versuche via SMTP eine Mail zu versenden. Es wird ein eigener Mailserver verwendet, es sind keine Zugangsdaten nötig. Immer wenn ich eine SEND Funktion in der Runtime starte, stürtzt diese ab. Sehr ominös :confused: Der Diagviwer zeigt
set up servers for redundancy
hello everyone I have this architecture and IEC61850 protocol. This configuration includes: - 8 relay GE MULTILINE - 2 SEL3354 servers - 2 switches SEL2730 - HMI Panel PC I have successfully communicate with any relay with IEC61850 protocol. but I have
Message Control mit MC52i
Ich habe Probleme mit den Einstellungen für mein Message-Control Ich verwende Version 6.22 und ein Cinterion MC52i Modem. Dieses ist seriell an Port 1 angeschlossen. Im Message-Control hab ich die Einstellungen soweit übernommen, dass Status OK bei Com1
Message Control SMTP mit web.de
Hallo, ich bin gerade dabei das Message Control einzurichten. Ich möchte zunächst einfach eine E-Mail zu Testzwecken verschicken. Hierfür verwende ich den Postausgangsserver von web.de. Ich habe die Einstellungen direkt von https://hilfe.web.de/mailprogramme/pop3.html
Relays Offline In Runtime
Dear Support, We are using DNP3-Process gateway over serial communication. Our network include 50 relays out of which 3 relays are showing offline on Gateway Runtime. In actual Relay is reachable(pingable) and from other workstation on the same network
Server & Client Runtime
Dear Copa Data Team, I want to activate Runtime from Server and client has to use the Server Runtime. During my search I found in many places that Script Auto_Start & Script Auto_End , Please clarify more about these Script and mention why we need these
Internet-Explorer ActiveX Objekt
Hallo, ich habe auch bei dem Internet-Explorer Element ein Problem. Bei manchen Rechnern kommt es vor dass ein schwarzer Kasten in der linken Ecke des Fensters auftaucht. Es wird der WebClient gar nicht geladen, an welcher Einstellung kann das liegen?
I want to know how can i read the values from ABB M2M ?
Nice to meet you :D I'm working at the electric engineering company in Republic of Korea. So, Understand my poor english skills ~ :D I want to know how i can read the values of ABB M2M. I will use the LAN port of M2M and the opposite side of LAN cable
Dual Ethernet Port in Runtime PC
Hi Support, I am using zenon V7.11. I have zenon runtime running in PC with dual ethernet ports. Those ports are connected into the same hub. Everything is running well, but when the primary ethernet cable (primary port) is disconnected, the runtime is
Message control using USB GSM modem
Hello, After checking the sticky topic Modems that are tested by COPA-DATA for message-control I bought the Huawei E1550 – UMTS-Modem for sending messages. Accordingly the the mentioned topic, it should work, but I think I am doing something wrong.
Message control - SMTP
Hi support team, I am trying to send message through zenon 7.0 to my gmail account. I enabled the pop in my mail settings & did the configurations in zenon. created functions send message and message activate. defined user. Please find the attached snaps.
zenAdminSrv cannot be reached...
Servus Miteinander, ich habe ein Problem beim Einrichten/Konfigurieren unseres Zenon Webservers/Webclients. Der Webserver läuft und ist auch über IP erreichbar. Zenon Webclient wurde über den dazugehörigen Button auf der index.htm installiert. Wenn ich
Modem auswählen
Hallo zusammen, ich brauche mal eure Hilfe. Unsere beiden Programmierer sind krank und ich muß jetzt irgendwie aushelfen. Wir haben hier eine Operator 7.11 im Einsatz. œber ein GSM Modem sollen SMS verschickt werden. Das Modem ist eingerichtet und lässt
Everywhere Server by Zenon
Hallo an Alle, ich bin gerade am Testen des Everywhere-Serves by Zenon. œber diesen soll es möglich sein verschiedene Variablen und die ALM in einer Smartphone App darzustellen. Nun habe ich mir die App runtergeladen und wie in dem Handbuch beschrieben
SNMP connection problems
Hello! I am having an issue with zenon 6.51 on a customer Server. After the runtime startup the connection to the snmp variables seems to be fine, but a few seconds later it's gone. The Diagviewer is not showing errors from the driver. If i try a snmpwalk
Zenon server & Client Connection
Hello Everybody Am facing one problem in Zenon Run time Server and Client connection establishment. I have installed Zenon run time & Web server in one machine and Client on another machine. I am getting screens from Zenon Run time to Zenon client machine
Remote transport
Hi, I can not establish connection with remote computer. When I try to ping computers IP or name, ping works fine. Ater REMOTE TRANSPORT: CONN. SETTINGS, I pick remote computer name and after clicking on ESTABLISH CONNECTION, message appears: "ESTABLISHING
Message control using USB GSM modem
Hello. My GSM Modem is USB not Serial. In the manual, noted that only serial GSM modem should be used in message control. Isn't it possible to use usb GSM modem? Thans. This is a migrated post! Originally posted on 17.06.2014 by user jessica. Please be
zenAdminSrv startet nicht immer automatisch
Hallo zusammen, gibt es einen behebbaren Grund, weshalb bei einem bestimmten webclient der zenAdminsrv nur bei jedem zweiten Rechnerstart automatisch gestartet wird? - Ich habe aktuell ein windows7-Notebook, bei dem das einigermaßen zuverlässig der Fall
Laufender Zeitabgleich
Hallo, 2x zenon 7.10 SP0 / 2x Windows Server 2008 Server / StandBy-Server Konstellation mittels Softwareredundanz Laut DiagViewer am StandBy-Server werden alle 30 Sekunden die Systemzeiten vom Server neu gesetzt, allerdings wird hier eine Zeit weniger
M-Bus Fehler am StandBy-Server
Hallo, 2x zenon 7.10 SP0 / 2x Windows Server 2008 Server / StandBy-Server Konstellation mittels Softwareredundanz Der M-Bus ist seriell nur mit dem Server verbunden. Die Runtiume am StandBy-Server zeigt die M-Bus-Daten richtig an. Allerdings bringt der
Message Control
Dear Support Team, I am using Zenon 7.00. I configured the message control and also I am receiving the message from the SCADA. But when I try to acknowledge the alarm from the mobile, it is not happening. The following setting I have done for acknowledging
Problem with non-networked variables on webclient
Hi I have an issue with the Zenon Webclient which I’m hoping you may be able to help me with. Not an easy one to explain, basically I have two setups which are identical consisting of a Server and single webclient. Both running exact same project, same
Probleme beim Senden von Störmeldungen an SAP
Hallo zusammen. Hat jemand hier schon mal versucht Meldungen von Zenon, inbesondere Störmeldungen, an einen SAP Server zu senden? Das Logfile des SAP Servers meldet den Eingang des Aufrufes des SAP Funktionsbausteins: ALM_PM_MAINTNOT_CREATE. D.h. generell
Message Control: Auslösen von Nachricht über Grenzwert geht nicht
Hallo! Ich versuche mich gerade an der Konfiguration von Message Control unter zenon 7.10 Das Senden einer Email per SMTP durch den direkten Aufruf einer Funktion vom Typ "Sende Nachricht" funktioniert. Lege ich eine neue Funktion an und parametriere
zwei Projekte mit gleichen Daten im gleichen Netz
Hallo zusammen, ist irgendwas bekannt, dass zwei zenon-Supervisor-Projekte (eins in Version 7.0 und eins in Version 7.1), die auf zwei unterschiedlichen Rechnern im selben Netzwerk laufen, bei Zugriff auf die gleichen OPC-Daten unterschiedliche Ergebnisse
Access ZenOn server tags
Hi, We have ZenOn server running and it works well. I am wondering if there is a way to access ZenOn server tags by a different ZenOn server project? For example, ZenOn server B access ZenOn server A internal tags. A and B are completely two different
Next Page