Authorization is not available on this PC
Hello, I have an error message (Authorization is not available on this PC) when trying to force variable from Zenons button. This is aknowledge button for alarm. This is Zenon 6.22 version. Best regards This is a migrated post! Originally posted on 09.01.2009
Parameterübergabe Button
Hi, ich habe folgendes Problem: Ich würde gerne mit einem Textbutton eine Integer Variable verändern. Geht ja über eine Sollwert absetzen Funktion. Jetzt habe ich allerdings dass Problem, dass ich mehrere solcher Buttons, allerdings mit anderen abzusetzenden
Alarm Status Line and Alarm List
Hello, I have two questions on this topic. 1) Is there any way how to adjust the background color of status alarm line according to the alarm class (e.g. Faults - red, Warnings - orange, etc.)? 2) Is it possible to set, that the oldest unacknowledged
the shrink database utility works fine, but do we need to perform it again in the futur?
We have used the shrink database utility for a project which database was increasing dramatically (more than 23GB in 3 months); It works fine, but do we need to perform it again in the futur? as i understand the shrink utility will also change tge datatabse
Could not restore backup in the editor
Hi, I'm using 6.22 SP0 Build3. I'm frequently facing a problem especially in Windows Vista where I could not restore the project backup. At first, when I open the editor, I could not see any project under the active workspace. I'm getting a error message
150 Pumps
Hy! In meinem Projekt gibt es ca 150 Pumpen gleicher Bauart. Ich will die Störungen dieser Pumpen in einem Popup darstellen. Dieses Popup soll durch drücken auf das Pumpensymbol geöffnet werden. Die Namen meiner Variablen lauten wie folgt : PU001_ST1,
ETM Bild Windows CE 6.0
Es werden bei unseren Terminals, die mit WIndows CE 6.0 laufen keine ETM-Bilder angezeigt. Es handelt sich um ein normales ETM Bild, dass in dem Editor (Windows XP) ohne Probleme dargestellt werden kann. Kann es sich hierbei um ein Lizenz Problem handeln?
Windows-Einstellungen
Hallo, Ich habe ein Combobox. Die Farbe für das markierten Element kriege ich aus Windows-Einstellungen und zwar "Farbe für die markierte Elemente"? Wie kann ich im Zenon andere Farbe wählen, unabhähgig vom Windows? Ist das überhaupt möglich? Danke This
Alarm blink quit
Hy! I want to do the following: I have an bool tag "Fault1". This fault should be indicated by a rectangle. The coulour of the rectangle should blink red if "Fault1" get 1. If the "Fault1" is quit in the alarmlist then rectangle should get constant red.
Archivdaten in ETM anzeigen
Hallo, ich bräuchte Erfahrungswerte bezüglich der Auswertung von umfangreicher Archivdaten im ETM (erweiteter Trend Modul). In meiner Zenon Anwendung werden ca. 700 Variablen, aufgeteilt auf 9 Archiven aufgezeichnet. Die Archive werden mit der Runtime
Symbol drehen...
Hallo, mein Problem ist so: ich habe einen Drehtisch, der in 3 verschiedenen Positionen sein kann: 0Grad, +90 oder -90 Grad (Sehe Bild). Das Platzsymbol kriege ich aus Symbolbibliothek, also mit Ersetzung geht nicht, weil ich muss 2 verschiedene ersetzungen
Trend Line
Hello: I'ts possible to change the line width of a trend curve? put the line like bold? Thanks: This is a migrated post! Originally posted on 12.12.2008 by user rloureiro. Please be aware that information can be outdated.
Zusammenspiel Zenon - Eplan
Hallo Zusammen, vielleicht kann mir jemand von euch helfen. Ein grosser Werbeeffekt der Firmen Copadata und Eplan ist, dass ein perfektes Zusammenspiel der Programme zenon und ePlan P8 möglich ist. Ich war begeistert als ich davon hörte und wollte es
Navigator: Starzoom auf minimal setzen
Hallo, ich habe ein Weltbild und einen Navigator dazu. Beim Starten steht Zooming auf Maximal, ich möchte aber auf minimal einstellen. Ist es möglich? Zenon Version ist 6.22. Danke. This is a migrated post! Originally posted on 12.12.2008 by user alice18.
Einzelne Datei nachladen
Besteht die möglichkeit auch nur eine einzelne Datei nachzuladen, speziel eine .txt Datei aus den Sprachenlisten? Weil wenn diese Datei ersetzt wird, dann erkennt die runtime scheinbar dies nicht und läd keine daten nach. Auch der Parameter alle dateien
License: Amount of IO <> Tags -- Lizenz: Anzahl IO <> Tags
Situation: It is possible to run a zenOn Runtime with a Version >= 6.21 with a zenOn 6.20 Runtime license Until zenOn 6.20 the license calculation bases on IO (see table below) With zenOn versions greater 6.21 a license bases on Tags (1 Hardware-Variable
Verschieden farbiges schloßsymbol
Besteht die Möglichkeit dem Schloßsymbol verschiedene Farben zuzuweisen, also in einem speziellen Fall, ob ein Schalter gesperrt ist , oder ob man nicht die Berechtigung hat ihn zu bedienen? Mfg Matthias This is a migrated post! Originally posted on 04.12.2008
SQL problem with zenOn - huge project-log file
Refering to following thread: http://www.copadata.com/forums/showthread.php?t=214 With zenOn 6.22 SP1 all Projects will have their SQL-Log file with recovery-model "simple". This means when - creating a new project - converting a project (from an older
RGM-Datensicherung
Hallo, ich habe mich jetzt bereits eine weile mit dem RGM beschäftigt. Ich suche eine Lösung indem ich max. 99 Rezepturen verwalten kann. Zudem soll man zu jedem Rezept eine Bezeichnung, Nummer, Name etc. mit gesichert werden. Dann sollen einzelne oder
CLX Variable Names
HY! IÂ'm working with zenon 6.22 SP0 build 6. In my network are 7 Allen Bradley Compact Logix L32E. They are connected to zenon with the "AB ControlLogix Ethernet" driver. The program in all seven PLCs are the same. Problem: the Tagnames in all PLCs are
Erweiterter Trend Diagramm X-Y Darstellung
Ich würde gerne ein Diagramm anlegen mit einer x-y Darstellung. Hierzu habe ich ein Bild erstellt mit dem Typ erweiterter Trend. Dazu dann die Bildumschaltungsfunktion, bei der ich dann auch in die Parameter eingabe komme, soweit funktioniert noch alles,
hardcopy geht nicht
Die hardcopy funktion im Editor will einfach nicht funktionieren, der Menüeintrag ist zwar da, aber nach einem Klick passiert einfach nichts. In der Zwischen ablage befinden sich nach dem betätigen auch keine daten. Weiss jemand woran dass liegen könnte?
dropdown button und Sicherheitsdialog
1) Gibt es in Zenon eine möglichkeit ein Dropdownbutton anzulegen? Genauer geht es um eine Formatauswahl, also bedeutet ich hätte gern, dass die aktive Zeile angezeigt wird und wenn man auf diese Zeile klickt, dass die anderen Formate untereinander angezeigt
Variable 'xyz'' wurde nicht geladen da Typ mite der Datentyp ID '63' fehlt!
Hallo, beim –ffnen des Projektes im Editor erscheint für mehrere Variablen die Meldung: Variable 'xyz'' wurde nicht geladen da Typ mite der Datentyp ID '63' fehlt! Wobei die ID auch andere Werte annehmen kann. Diese Variablen gibt es aber nicht mehr im
Limit Text - Display ID or Name of variable
I have many pages with the same layout and I need to be able to display the limit text (I can do this already) and the ID of the variable. I thought I'd be able to create a link text and just tell it to display the ID of the variable rather than the limit
Database cannot be opened! Error
I cannot open my existing projects, restore backups, or create new projects in zenOn 6.22 SP0. I get the error "Database cannot be opened! (project_name)" When I try to create a new project, I get an error stating that zenDBSrv.exe is not running. When
Report Help
Hello, I have an archived variable that is scanned every 1hour( for example fuel consumption for a certain diesel engine), my costumer wants to make a report. The report should include the fuel consumption for every hour of the day( so i have have 24
Executing a function based on computer name
We have 7 workstation computers in a network and I want each screen to start up with a different picture. I have the picture switch functions set up already but I need to know how I can execute a particular function based on the computer name. For example:
Variable von Excel über DDE-Treiber in Zenon darstellen
Hallo zusammen, könnte mir evtl. jemand beschreiben wie ich eine Variable von einem Excel Dokument in Zenon darstelle? Habe bisher den DDE-Treiber wie gefolgt Konfiguriert: NAME: TEST_VAR SERVER: EXCEL THEMA: (TEST.XLS)TABLELLE1 KANAL: Z1S1 darauf hin
How to set the printer in Runtime
Hello all, My project contains one ES computer and 5 Runtime computers - each in a different location. The runtime project is downloaded from ES(editor) computer. I need to set the printer for runtime because each runtime project have a raport that must
Merging Cells in Report
Is it possible to merge more than 2 cells together in a report? cause im not finding a way, and i want to include a logo on top of the page but the cells below take the same size as the logo. This is a migrated post! Originally posted on 14.11.2008 by
Mehrere Sollwerte setzen (Taster ähnlich) / Set multiple values (scanner like)
Hallo, ich habe folgendes Problem: Ich möchte bei mehreren Werten gleichzeitig die Sollwerte setzen. Allerdings muss der Button sich wie ein Taster verhalten (nicht gedrückt bleiben und eine gewisse vorgegebene Haltezeit in ms haben). Ich kann zwar ein
Convert 6.22 SP0 project to 6.21 SP1 (Antworten gerne auch in deutsch)
Hello. Is there an possibility to open a 6.22 workspacebackup with an 6.21 editor? I projected the wsb with my 6.22 SP0 but another company wich is working with us for our customer wants to implement my projects in their 6.21 SP1 project. Thank you. This
Global search and replace
Good morning, I have a number of tags that have I have had to changed in my Twincat PLC as they need to be in a different task for faster processing to overcome a timing issue. This is not a problem and have changed it within a few hours within the PLC.
Archiving under Windows CE 5
Hi guys, my question is, what are the possibilities of archiving under Windows CE 5? I know that from the version 6, I can use the module Archive server and Extended trend SE but can I somehow store the process data also in the version 5? Thanks for your
Keyboard Press
Is it possible to pick up the function keys been pressed on a particular picture:cool: This is a migrated post! Originally posted on 11.11.2008 by user allmendinger. Please be aware that information can be outdated.
zenOn error
hello im using zenOn 6.22 SP0 Build0 and when I close the curves dialog in an Extended Trrend page in zenOn runtime it gives me an error and shut down. is it a version problem? This is a migrated post! Originally posted on 04.11.2008 by user ziadrached.
Trends Time
Hello , I have a problem in showing the date DD//MM/YY in the time axis of the trend, the hh/mm/ss are only shown, although in the time filter the YY,MM,DD,HH,MM,SS are all checked and when I remove the HH,MM,SS check for the time, the date appears but
Copying variables
Wat is the best way to copy variables Via XML or DBF or in ZENOn editor?? I have prepaired a complete Bay . the variables start with - XXXX now I want to create a new bay. So I have to copy the VARS also. I have more than 10 bays. Per Bay I have 140 vars.
Internal Variables
I am importing a WORD from a S7 project into my zenOn application. I would like to assign Internal variables to each bit of the WORD. This would normally be done by masking the WORD to get the individual bits but I do not know how this is done in zenOn.
Next Page