Raspberry Pi connection to Zenon
Hello, is there any possibility to connect a Raspberry Pi to a Zenon Runtime? I prefere a TCP/IP Hardware if possible. Of cause, if there is a other easy Interface-Solution. Please tell me. Thanks for your Help !! BR Seba This is a migrated post! Originally
IEC 60870-5-101_104 Value Write Issue
Dear Support Team, We are set an setup of IEC 60870-5-104 Straton as Slave and browsing variables using Zenon IEC 60870-5-101_104 driver as Master. All Tags are communicating perfectly between Master and Slave, but could not write value from Master (Zenon).
Counting Number of Variables with Revision Bit Active
Hi, is it possible to sum together the number of variables that currently have the Revision Bit active and use this number to provide an indication to an Operator in runtime that there currently exists suppressed alarms? I can see some System Variables
IEEE C37.118 (Synchrophasor)
Hello, I am using Zenon Energy Edition 7.60. I want to use IEEE C37.118 (Synchrophasor) driver in an project. I could not any driver in editor nor manuals. Can you share with me a manual or a flyer abour it? Thank you, Kind Regards, Zeynal. This is a
Configuración de variables de medición
Hola, Estoy intentando leer se±ales an¡logas de tipo REAL pero el zenon lo lee como se±al "binaria". Ejemplo: en lugar de leer "12", leo "1100". Favor su apoyo para saber que debera cambiar en mi configuraci³n para poder leer el valor num©rico REAL.
Control bit not active
I am facing an issue with SEL 451 control bits (RBGGIO bits). They seem to become inactive by themselves. I import them into zenon, link them with a button and they work fine. After sometime or after restarting the button dosent work i.e. no value is
Project Migration Zenon 6.10 to 7.50
Hi, I made a migration from version 6.10 to version 7.50 but my project came without the variables. I am obliged to take back all the affections of the variables. Please, how do you migrate the entire project with the variables. Thanks for your help This
SBO rejected Error
Hello Team, While trying to execute a breaker operation from Zenon I get a interlock text 'SBO rejected'. I had referred to the help in Zenon but could not arrive at a reason/solution. Whether it is a internal interlocking text from IED or is it from
Message control zenon6.ini
Hello, I have noticed that the zenon6.ini file are not the same on the primary server and the standby server. I am configuring an SMTP functionality and I noticed that I need to copy the [Message Control] section from zenon6.ini file on the editor PC
IEC 62056-21 Driver
Hi, I am trying to use the IEC62056-21 driver in Zenon 8.0 to read values from a CEWE Prometer however I am unable to get Zenon to communicate to it. The meter is connected to the computer via a serial cable, it is set as RS232 with the following setting
ConnectionState variable
Hi! I'm using Zenon Energy Edition v7.6 with the IEC61850 !ConnectState Variable to detect communication error for ALM with a certain IED in my project. But the variable never goes to TCP_CONNECT_ FAILED when i disconnect the RJ45 cable from that IED
General Interrogation Fail in 61850
Hello, I am working Zenon Energy version 7.20. Zenon communicates with many SEL relays using 61850 protocol. I want to use RCB, but I have problems when the RCB are activated by Zenon. If I use polling mode everything works well and the representation
Straton Reading Wrong System Time
Hi Guys I am using get curdatetime block in straton to read the system time(which i use for a logic) in the Server, Now the problem is the block is reading the UTC time but i need UTC+5.30 (my system time is already UTC+5.30 only). The same logic is reading
Redundant Ip address changeover event in CEL
Hello Team, In energy drivers wherever secondary IP address is possible, I want to generate an event or Alarm whenever a changeover happens from primary to secondary IP. I want to achieve this without using SNMP. Whether I can get an event from my IEC60870
Levels/Layers in Zenon
Hello Team, Is it possible to activate and deactivate layers/levels in runtime? That is, suppose I have made a screen using different levels. When I deactivate/invisible a level the graphics in that level disappears from the editor, and when I activate/visible
Status bits actions in reaction matrix do not enter entries into CEL/AML
Hello Team, I have configured a reaction matrix to execute a function and to create an entry in CEL/AML whenever the status bit 'off' changes. Although the status bit is changing, neither the function nor the CEL/AML entry gets executed. This same I have
Alams/ Events Deletion
Hi, Support. Is it possible to delete Alarm & event of a specific (absolute) time period ? or few specific alarm or event ? If yes.. Please explain the same. Thanks in advance. This is a migrated post! Originally posted on 21.09.2018 by user azami. Please
Historian Read Back
Hi, Please help me on this issue: In the case with architecture of using Historian Computer working independently with Server Computer, is there anyway to store database in both Server Computer and Historian Computer? As I see Server Computer will save
Variable deactivation and alarm deactivation from Runtime
Hello Team, Is it possible to deactivate a variable(or many) and alarm from the runtime. ? That is the variable deactivated from the Runtime should not be ever polled until I activate it back and the Alarm deactivated for any variable should not show
Checking communication presence with secondary IP address(device) while primary communication is established
Hello team, In many of the drivers, we have option to enter a secondary IP address/ redundant IP address. In my case IEC 60870 client driver. My requirement is, while my SCADA is communicating with the primary IP address in the driver, I want to check
Error while giving open command ti the RTU IEC 608710 104 Protocol
Hello Team, I am not able to send open command to the RTU in IEC 60870 protocol from the SCADA. I am able to send the close command though. I tried the same thing using a IEC 104 simulator and I was able to send both the commands open and close. While
Permanently read variable
Hello Team, If a variable is enabled for permanently read variable how is that variable polled by Zenon. (Time interval)? This is a migrated post! Originally posted on 24.08.2018 by user joelprasad. Please be aware that information can be outdated.
Error while importing cfg file in comtrade viewer
Hello Team, I am facing an error while I import the .cfg file in the Comtrade viewer. I have attached the screenshot below. Please suggest a possible solution. It happens when I click on open button and select the .cfg file from the extraction folder.
Runtime Hangs when pressing Button
Hi everyone, I am currently evaluating Zenon 8.00 since our company is looking for a new HMI that can be used in our electric industry. I am very new to Zenon 8.00 and I am currently going through the firststeps PDF provided with the software. I have
Iec60870 104 slave driver process gateway
Hello Team, I am using IEC60870 104 fieldbus in zenon logic as slave as a process gateway. I have added certain no. of IEC61850 double point information to the gateway. Now in the client side of the gateway I am getting readings like shown below: For
Comtrade viewer issue
Hello Team, Even after licensing using energy license it shows this message'No energy edition license found' on the comtrade viewer. I have attached the screenshot. Please suggest This is a migrated post! Originally posted on 08.08.2018 by user joelprasad.
Error message popup from windows everytime I open and close Zenon energy runtime
Hello Team, I am facing an error every time I open and close Zenon Runtime. Although it does not affect the functionality of the runtime. In the beginning when the error comes, I close the dialog box and the runtime works perfectly. Any suggestions why
Communication with IEC 61850 edition 1 and edition 2 simultaneously
Hello team, While communicating with IED Devices of both IEC 61850 Edition 1 and edition 2 simultaneously, is there any prerequisites/necessary settings that needs to be taken care off? Can both the Edition devices communicate with the same IEC 61850
61850 remote server or client
I have v7.6 Energy Edition communicating to 61850 IED servers. I need to set up remote 61850 access sort of like a process gateway. Are there any papers or KB posts regarding this? Does it require a second driver instance? Thanks This is a migrated post!
Read IEC61850 Command AddCause after select write successful
I am currently facing an issue with the IEC61850 SBO command AddCause. I read the command fail AddCause by using this command info variable: */Oper.AddCause The variable works fine if the failed condition already exist before select. However, if the failed
Proble with Bachmann M1 Protocol
Hi Guys I have a problem while extracting signals from Bachmann protocol. I am having 10 wind turbines, and I need to communicate with all of them.I added the Bachmann Driver and configured all the turbines inside it. If I Extract signal from one turbine,
IEC101 error
Hi Could you give me some idea that I use 101 master connect to Process gateway, but after connected , I receive old value ( display with previous time tag), and after few minute , it disconnected. My log file has comment : The previous frame was resend
Importing of values from text file to Runtime
Hi Guys I am taking few data from the IED through FTP. The Data are present in the the Text file. I want to read the values from that Text file into the Runtime and store in our historian. Is there any solution or suggestion?? This is a migrated post!
Problem with ICCP Gateway
Hello, I can't find the Transport Selectors (TSEL) value in the zenProcGateway.INI. Where can adjust that value? This is a migrated post! Originally posted on 31.08.2017 by user glopez. Please be aware that information can be outdated.
ConnectionState
Hello, I try to visualize the state of the 61850 connection by means of a dynamic text symbol. The text symbol is set to present the limit text of the value of the connectionstate variable. The connectionstate variable has the rema "IEC 61850 Connection
File transfer in zenon-7.5 with IEC_61850
Hello Copadata support, I am trying file transfer between an IEC-61850 device and Zenon 7.5. Could anyone support? Thanks in advance This is a migrated post! Originally posted on 13.10.2017 by user saravanan1985. Please be aware that information can be
Ascending CEL problem
In 7.60 build 39532. Presenting events ascending (last event under) does not work as in previous versions. So in case the event list is full and a new event comes. It wil not appear on the last line but you have to scroll down to get the event in the
IEC61850 Timestamp
Hello Support, I am using IEC61850 protocol which supports time stapm to read data from SEL 451 relay using buffered reports, the problem is that i am receiving timestamp from the relay with wrong timestamp ( miliseconds in difference). Please advise.
ALC Source
Hi I have a question for ALC for power transformer? That the ALC sources can come from each sides of transformer and change different color for each sides. I tried to use link to connection between sides but it did not work. I read the manual and tried
Interlockings
Hello, I have a problem with the interlockings module. It looks like in case that one of the variables is INVALID, The interlock will not work. Also what is strange is that the INVALID statusbit is not shown in the uncollapsed list of the statusbit, but
Next Page