Zenon Opc On Dcom
Hello support, I have Zenon 6.51 installed and I need to configure OPC server, but i could not find zenon opc server on component services...dcom? how to install it? Thanks in advance This is a migrated post! Originally posted on 18.05.2014 by user yara.
IEC61850 Commands through Zenon Logic
Hi, we are trying to do commands that already work with "command group" functionality with zenon logic. It is necessary for use to program such an automatism. We have tried to write directly the "Oper.ctlVal" without success. Can anybody help how to write
Performance des 3S ARTI NG Treibers
Hallo, ich realisiere gerade ein Projekt, bei dem mehrere (evt. später bis zu 150) identische Codesys Steuerungen (Eaton Touchpanels mit Soft SPS) über Ethernet an eine Zenon Visu angebunden werden sollen. Macht es einen Unterschied, ob ich einen einzigen
Datengewinnung über Adam-4017+ Modbus RTU
Hallo Zusammen, ich möchte für eine Photovoltaikvisualisierung aktuelle Strom und Spannungswerte an einem TPC darstellen. Auf dem TPC läuft Win CE in der Version 6.0 und die Zenon Runtime 7.0, dabei verfügt der TPC über eine RS-485 Schnittstelle. Das
Communication Between Zenon to RS Logix-5000
Dear Support Team, I am using Zenon 7.00 I am trying to do the communication between Zenon to RS Logix-5000 with RSLinx Classic gateway using Emulator. Allen-Bradley ODVA driver: I did the configuration in SCADA as follows, 1. Driver Configuration (Ref:
zenon CE - BeckhNG.dll could not be loaded
Hello, I want to use a zenon projekt (V7.0) with beckhoff NG communication on a VIPA CE Touch Panel. But at the start of the runtime i get the message "BeckhNG.dll could not be loaded". I think I have to install the TcADS Libary on the CE Panel. But I
Communication Between Allen Bradley and Zenon
Dear support, I have RSLogix software on one PC and Zenon on another PC. I like to communicate between RSLogix and zenon by using RS linx driver, but when I am trying to create RSLinx driver it is showing an error (attached the same file). Can anybody
Variablen Export Manager for TiA Projects
Hallo, funktioniert der Variablen Export Manager for TiA Projects auch mit zenon 6.51 oder benötigt der zwingend 7.10? Danke schonmal im vorraus This is a migrated post! Originally posted on 17.03.2014 by user testuser. Please be aware that information
DNP3 comm with S7-1200 module CP 1243-1
hi support, I'm testing the above module to communicate with zenon 7. Unfortunately i cannot connect and receive the error as per attach ? Any idea why this error comes out ? We did the same way we had done with s7-1200 modbus tcp/ip. We created datablock
ExportSQL32 driver example
Hello! I am trying use "Write variable values in SQL" driver. Driver is using ODBC. For ODBC created mdb file with empty table Send. When I run zenon runtime he in table created column with name of variable. In runtime I changed variable values, but values
Modbus TCP max number of connection
Hello colleagues We need to connect nearly 300 IEDs to zenon v7.10 using Modbus TCP protocol. Can zenon support so much connections? How better to make a configuration of modbus driver, do you have any recomendations? How much IEDs can we add to one driver
opc ua
Guten Morgen. Da ich im Forum nichts gefunden habe, schreib ich mal einen eigenen Thread. Ich versuche mich gerade an einer OPC UA Anbindung. Leider funktioniert es nicht so wie ich möchte. :confused: Ich hab von einem OPC UA Server die URL und die Anmeldedaten.
DDE Client Example
Hello I am use DDE Client Driver in the zenon Supervisor 7.10. As DDE Server used Microsoft Excel (English) files Test.xlsx, SHEET1. My settings for DDE Client Driver: Name: DDEVARIABLEINPUT Server: EXCEL Topic: [TEST.XLSX]SHEET1 Item: R1C1 Variable properties:
Convert variable for Process Gateway
Hi! Have another one question :) I have some variables from different devices (IEC850, 870-104) with analog values (Current, Voltage, Power, etc.). I have already adjusted this values in "Variable -> Value calculation". For some points i used linear adjustment(kW
command using Modbus TCP/IP
Hi all:) i am using Zenon 7.10 and i have PLC S7-400 from Siemens, the connection betwen the PLC and SCADA by Modbus TCP/IP protocol please chech my problem : when I create new variable (command Variable)and set the offset for it only (don,t attempent
"Variable 'test' was not loaded because driver with ID '101' is unknown!" message
Hello, colleagues! After many steps of changing my project error message starts to appear. It happens during activate of project in V460 editor. Error message has text "Variable 'test' was not loaded because driver with ID '101' is unknown!" and comes
Bacnet
Hallo Vielleicht kann mir jemand bei meinen Problem helfen! Ich möchte für die Handbedienung eine BACNET Variable (Present-Value) beschreiben. Das funktioniert auch (0/1) , aber wenn ich das aber getan habe kann ich die Bedienung nicht mehr auf Automatik
Sql access via ODBC
Hi, I'm trying to read/write some data to sql database. I ran both scripts from documentation creating two tables, created sqlDrv and associated it with a variable. But after writing some value to this variable my database table is still empty. Could
S7-1500
Hi all I'm doing a project with s7-1500 and the customer wants zenon 6.22. I assume there are no problems with communication? Many thanks rf This is a migrated post! Originally posted on 27.11.2013 by user craig. Please be aware that information can be
modbusRTU-Treiber Fehlermeldung im DiagViewer
Hallo zusammen, gibt es eine Möglichkeit, beim Treiber MODRTU32 einzugrenzen, welche Steuerung ein Kommunikationsproblem hat, wenn man im DiagViewer die Fehlernummern -10 und -11 bekommt? Denn mehrere ModbusTCP-Steuerungen kommunizieren über diesen einen
OPC Tag issue
Hi Support, While observing an OPC tag created by Zenon OPC Server, I am unable to discover the OPC Channel name and device name. Can you please advise that if I am seeing a complete OPC Tag from a Zenon OPC Server, how will I distinguish which part belongs
SNMP. Private data.
Hello! My question about driver SNMP. I need to take the system parameters of the server HP, for example, temperature. It isn't difficult to take usual data on SNMP, but this task becomes complicated that data are in MIBbase have status of private. Name:
Reading 64-bit registers via Modbus
Hi Support, We are using Zenon 6.51 SP0 on Windows Server 2008 R2 There is a need to read a 64-bit double precision float value distributed in 4 consecutive modbus registers. The data type for modbus variable REAL is supporting only 32 bit range. Kindly
Re: AK Driver Properties
Hi all, I have problem with the configuration of same driver, when i go to AK-Driver-configuration bar and click parameters it shows a warning message "This application is not running on your system and will end now !" What thoes it mean, which app is
Calceling value substitution for OPC variable
Hello I would like to ask you how can I get back real value and status for OPC variable. I use standard "Variable diagnosis" picture for value and status change . There is no problem to make a value substitution. Only to get back last spontaneus value.
Event list
IEC60870/ Zenon 7.00 SP0 build4 I have an input point e.g. P120_1: single point information and spontaneous, CAOA: 1, IOA: 2 If I use this configuration, I can see it in Zenon Events list. If I change input point e.g. P120_1: single point info with time
Driver Name
I have an OPC driver configured called TC1.CCInt.H23 I want to change this to TC2.CCInt.H23. When I try it's greyed out in the properties box and it won't allow me to select it. How do I do this? Thanks This is a migrated post! Originally posted on 22.10.2013
Siemens S7 drivers
Good morning We use Zenon 7 to visualize the data points of two Siemens S7 PLCs. We use TCP/IP adapters to connect them to the network. While we can map all data types, inputs, outputs and markers on one of the drivers, we can only map markers on the
burpvi-Treiber 7.00 <-> 7.10
Hallo, wir haben ein Projekt laufen, in dem eine Anbindung mit dem burpvi-Treiber realisiert ist. Dieses Projekt wurde ursprünglich in Version 6.51 erstellt und ist dann nach Version 7.0 "umgezogen". Jetzt wurde Version 7.1 installiert, aber in Version
Beckhoff NG driver
And Hi again :) I have another problem with the communication between Zenon 7.10 and Beckhoff Driver. Apart from having the SQL database for historic data, I need to import variables directly from the driver. I have tried it with a Beckhoff TC-ADS driver
Receive and send tables SQL Database
Hello everybody, I am doing a project with Zenon 7.10. I need to create a sql database for read and write data in communication with a Beckhoff Driver. I have created the SQL driver and the database, but I cannot see the tables for receive data and send
Trend
With DNP332 and Zenon 7.0 SP0 build4, I have problem with trend. If i lose the connection between Zenon and PLC. Zenon keep drawing line and if i change value offline ,When i reconnect Zenon and PLC , i can not get trace of the change that was offline.
Dnp3
Hi, We use Zenon energy version 7.0 My question is about when I lose the connection between SCADA-PLC. And meanwhile events were done in PLC .When I get back the connection, how Zenon get these events? Or are automatically polling? How come that in chronologic
Problem bei Variablenimport in zenOn - TwinCat NG Treiber
Hallo Ich wollte mit der zenOn Importfunktion die Variablen meines TwinCat Projekts durch Einlesen des *.typ Files verwenden, so wie es in den Dokus und vielen Foren beschrieben wird. Dies funktionierte aus soweit. Allerding bekomme ich bei TIME-Variablen
importing variables from Siemens Tia Step7 v11
how can i import variables from a Step7 V11 project ? i read the zenon documentation : "Use automatic import for versions up to Step 7 Version 11 Import variables with Step 7 Version 11 or later via the Variable Export Manager tool from Step 7 and then
Probleme beim Umstellen des Treiber für Kommunikation mit Beckhoff, TC ADS Communication Library
Hallo User! Ich beschäftige mich erst seit kurzem mit Zenon. Nach ageschlossener grrafischer Visualisierung bin gerade dabei Variablen der Beckhoff-EtherCAT-Steuerung in die Visualisierung einzubinden. Leider kriege ich die Umstellung des Variablen-Treibers
Profibus FMS Configuration Help
Hello! I have to set up communication to Siprotec devices via Profibus FMS. Simatic CP 5613 card is installed. Simatic NET PC Software is also installed. Communication DIGSI<>Siprtotec via FMS is OK. To set up FMS communication in Zenon/Sicam230 a configuration
SIMUL32-Einträge in zenon6.ini
Hallo, ich habe gerade ein Verständnisproblem zwischen der Treiber-Doku des SIMUL32-Treibers und den zenon6.ini - Einträgen bei zenon 7.0: laut Treiberdoku finden sich die zu diesem Treiber gehörenden Einträge unter den Abschnitten [SIMULATOR] und [SIMULATORTREIBER].
Backnet driver
Hi all, Regarding Backnet driver, (zen 7.10) while communicate with device via backnet driver, the communicate is not working after several hours. but connection is ok. important thing is that it could not recommunicate. it may lose a communicate between
Simotion Verbindung
Sehr geehrte User! I hätte ein paar Fragen zur Anbindung von Zenon 6.51 zu einer Siemens Simotion. 1) Gibt es eine Möglichkeit auf die Alarm-S Störmeldungen auf der Simotion zuzugreifen? 2) Kann man nur über die *.sti Datei kommunizieren? Wenn ja, muss
Next Page