Recent Topics
Zenon 7.60 editor (32 bit or 64 bit) Build 39532 Freezes when started
Hi, I've installed Zenon 7.6 build 39532, when i tried to launch the Editor (x64 or x32) it starts showing the workspace but after that directly freezes and doesn't response at at all. Thanks for you help. This is a migrated post! Originally posted on
Graphic Compile Error
Hello all, I get error messages on my graphic files . Print Screen is attached. What does it means? In Runtime the logos do appear on screens. Olesia. This is a migrated post! Originally posted on 06.11.2017 by user Olesia. Please be aware that information
Import variables from TIA V14 to Zenon 7.60
how can i import variables from a TIA 14 project with zenon 7.60 build Build39532 since PLC. This is a migrated post! Originally posted on 07.11.2017 by user johanngrimaud. Please be aware that information can be outdated.
Get RTC Variable from zenon
hi Support, in my project the plc's (ABB PM554) dont have RTC battery so i want to take a Variable in DT type from the zenon editor to my plc and set the RTC according to that variable. Tank you This is a migrated post! Originally posted on 07.11.2017
Tausender Trenzeichen in Variablen
Hallo, gibt es eine Möglichkeit eine Variable (kWh-Wert) so zu konfigurieren, dass der angezeigte Wert besser lesbar ist? Beispiel: Aktuell wird ein Wert in kWh so angezeigt: 4366514.00 kWh Kann man es auch irgendwie machen dass der Wert so: 4.366.514,00
Beschleunigung Bildaufbau
Bei der Bildumschaltung verzögert sich der Bildaufbau bei Elementen, die eine Sichtbarkeitsvariable enthalten. Gibt es eine Möglichkeit um den Bildaufbau zu beschleunigen? This is a migrated post! Originally posted on 08.11.2017 by user carina.schlicker.
unvollständige Meldung im Ausgabefenster des Editors
Hallo zusammen, wie findet man denn heraus, wer oder was hinter folgender Meldung im Ausgabefenster steckt (beim Erzeugen geänderter Runtime-Dateien im Editor): " ist mit ungültiger Variable 5617 verknüpft" bzw. " ist mit ungültiger Variable 9001838 verknüpft"?
Driver priority within UDT
How does driver priority work with regards to variables that are actually elements of a single structure in the PLC? We're using the Logix_ODVA driver, and virtually all of our variables are structured under a single tag. i.e.: BaseTag.Group1.SubGroup1.VarName1
VSTA-VB.Net - Macro Call Delay and Execution Delay
Hello, I am facing the following delay while executing the macro from VSTA-VB.net code. After my trigger Bool variable is high, 1. Macro is calling after 2 sec and this 2 sec delay is constant for all the trials. 2. Zenon variable from Macro output is
Projekt-GUID für Runtime relevant?
Hallo zusammen, ich möchte die Projekt-GUID von einem Zenon-Projekt ändern, weil ich Probleme mit der Datenbank auf dem Projektierrechner habe. Meine Frage wäre, wenn ich die GUID ändere, ob das Auswirkungen auf die Runtime hat? Also das Zenon-Projekt
Automatically build using the STRATON development environment
Hi, I have a STRATON project (W5L and K5P files). I would like to automatically build the project so that I can check for errors. Is this possible using the automation interface or via the command line? I have the STRATON Development Environment which
How to open PDF file in zenon run time
I need to open manual (PDF file) for my instruments in Zenon screen.. Please let me know how can I do this? This is a migrated post! Originally posted on 12.11.2017 by user azamsyscom@gmail.com. Please be aware that information can be outdated.
Report Viewer Trend über mehrere Seiten anzeigen
Hallo alle zusammen, ich benutze Zenon 7.50 und den Report Builder 2.0 von Microsoft. Ich habe ein Chargenarchiv, dessen Werte ich als Trend im Report anzeigen lassen will. Das Archiv kann über ein oder mehrere Tage Daten aufzeichnen, bis es beendet wird.
Alarme verschwinden in der Alarmmeldeliste
Hallo zusammen, wir haben folgendes Problem, bei dem wir Unterstützung benötigen. Wenn wir die Zenon Runtime nach mehreren Tagen schließen gehen die Alarme seit dem letzten Start der Runtime verloren. Auch pber die historischen Daten sind die Alarme nicht
Invalid Variablen anzeigen
Kann man irgendwie eine Liste/String o.ä. mit Invalid-Variablen zur Anzeige bringen. Gruß This is a migrated post! Originally posted on 16.11.2017 by user wenzm. Please be aware that information can be outdated.
Zenon editor 8.2 install fails, due to SQL Server Rules Check code (-1)
Brand new to Zenon software. The Zenon 8.20 software refuses to install. Its hanging on SQL Server install rules check. I’ve tried Win7 (before I found out Win7 can't run the editor!), and also a brand new Win10 Enterprise vm box with no other softwares
Too many I/O variables declared ERROR
I have around 1,50,000 variables in Straton. out of which 80,000 variables are Global variables. My licence is of unlimited tags but still, I am facing the above-mentioned Error while compiling the Straton Project. Please suggest what could be the problem.
Question newbie straton Msql server 2012
Hello, I just downloaded the evaluation version your straton software, being used with codesys, I find it is even easier to use, I managed in less than 5 minutes to make a communication with a modbus rfid reader without scpecifique library.I would like
zenon driver für OTPP Protokoll - Cars charging station
Hallo, können sie mich informieren ob dieser "Standart" bei Stromladung für E-Autos bei Copadata entwickelt wird ? Danke. This is a migrated post! Originally posted on 20.11.2017 by user Jusufs. Please be aware that information can be outdated.
CDWPF-Dateien (Sammeldateien) mit mehreren DLLs
Hallo zusammen, Zum "Verpacken" eines selbst erstellten WPF Controls beschreibt das Copa-Data Manual: Eine CDWPF-Datei (mit der Endung *.cdwpf) ist eine umbenannte ZIP-Datei welche die folgende Komponenten beinhaltet: XAML-Datei (zum Referenzieren des
Acces variable identification/tagname straton
Hi, I am using the identification of a variable in VBA for some calculations. I want to do something similar but using straton, but i canÂ't see how to acces the variable Tagname/Identification. Is there a way to do this? Thank you very much This is a
Uhrzeit auf Variable schreiben
Hallo, bei der Funktion kann ich die Uhrzeit nicht auf konkrete Zeit KNX variable schreiben. Warum werden nur Systemvariablen für die Auswahl angeboten ? zenon 7.50 Danke. This is a migrated post! Originally posted on 23.11.2017 by user Jusufs. Please
unacknowledged alarm decrease
Hi I have searched on the forums for the answer but couldn't find anything. When using the SYSvar unacknowledged alarm in a count it only ever increases, when alarms are acknowledged the count does not decrease. Any Ideas TIA This is a migrated post!
Best and worst Calcs
I have a number of Barcode scanners on a system with "no read" stats in a variable. What is the best way to show on a screen which scanner has the worst read rate and what that value is This is a migrated post! Originally posted on 27.11.2017 by user
Watchdog variable
hi everyone, i want to make a variable in zenon that tells me if i have a connection to the PLC, i want to show for every PLC if it is communicate with the zenon scada or not. the PLC is ABB AC500. thank you This is a migrated post! Originally posted
Sgnatur bei Taster
Moin, ich würde gerne eine Signatur abverlangen, wenn hinter einem Buttom eine Variable hinterlegt ist und dieser Button als Taster konfiguriert ist. Es würde nur funktionieren, wenn der Button nur als Schalter konfiguriert ist. Gibt es da eine Möglichkeit
Adding few web clients
Hello, I am using zenon 7.6 energy edition I tried to configure web server hosts, added few IP addresses, but it communicates just with one of them. I think I have problem with list, how i need to separate hosts' IP addresses? If there just one IP in
Zenon Analyzer 2.20 installation
Do you have installed/activated .NET Framework 3.5? It is needed for the SQL-Server installation. This is a migrated post! Originally posted on 02.12.2017 by user saraohyland. Please be aware that information can be outdated.
Opening Zenon 6.21 SP1 project in Zenon 6.22 SP2 :-
[SIZE=2]Dear Users , I tried opening up a Zenon 6.21 SP1 project in Zenon 6.22 SP1 and got the following message . [/SIZE][SIZE=4]!!! Attention! Direct access to variable values via VBA is now limited . you have to check and adjust VBA macros . For more
NET_SEL Variable
Good Morning, I am making a HMI for a test environment. And this is HMI includes an option to control switching objects. I have made a dynamic element (Switching object) that flashes when i have it selected. (NET_SEL is HIGH). When i execute the command
RS232 Serial block reading garbage value during PC startup
Hello, While reading the data from scanner through RS232 serial block in zenon logic, at very first time when PC is started or restarted and zenon Runtime is started then it is reading garbage values while scan and it is continuously reading the same
Process gateway connection problems
Hi, I have scada control system is connected with zenon software, and when I try to control some devices I must uncheck 'select routing' on checkbox process gateway so what mean 'select routing'. And if I want control with SBO from Control center but
Projectcollection of Runtimeproject
Hey, iÂ'm looking for a possibility to get the properrty of a project in a project in a ProjectServiceExtension. C# Code: foreach (IProject item in context.Parent.Parent.ProjectCollection) { } I just get the Mainproject, nothing else ?!?! This is a migrated
Time/Lot filter value in C#
Hello, I need to read the selected date in a calendar from time/lot filter synoptic in c# code. I have tried by accessing to to the element with get_DynProperties, but I don't have the keyword (and I'm not sure this is the best way). Is there any solution
OnlineContainer ActivateBulkMode
Hi, ich habe mir die AddIn Beispiele zu OnlineContainer angesehen und denke, dass ich den roten Faden sehe. Im Detail sind mir aber einige Dinge unklar: 1) ActivateBulkMode: Wird hier die Notification auf BulChanged aktiviert? Doku dazu :-( 2) Activate:
system table version change possible?
Hi Team, I developed a project in 7.5 and I want to use it in a 7.11 installed machine? Is it possible? I noticed those project when i open in 7.11, the system table version is 7.5 . Could it be possible to change that version back to 7.11 and can be
Zenon 7.20 SP0 build 17678 vs build 20554
Zenon Supervisor 7.20 SP0 build 17678 fails to open WSB files after they have been processed at another laptop with the same Zenon version but with build number 20554. Any ideas how to fix this? This is a migrated post! Originally posted on 18.12.2017
Zenon Installation.
Hello, Can I know what are the prerequisites for installing the zenon Software?. Are there any necessary windows updates? This is a migrated post! Originally posted on 19.12.2017 by user joelprasad. Please be aware that information can be outdated.
Events in AddinProjectWizardWinforms?
Hallo zusammen! In der Version 7.60 wurde der Wizard "Project Wizard" aus VSTA in ein Addin ausgelagert. Ich Frage mich jetzt wie wird der Wizard nach dem Erstellen eines neuen Projektes im Editor automatisch gestartet? Gibt es in einer WizardExtension
Zenon 7.11 , 7.2 and 7.5 will support windows 10 Enterprise?
Hi Team, Great thanks to the entire support Team. All my queries has been answered by the COPADATA Team. I have a query now, Did Zenon 7.11, 7.2 & 7.5 will support windows-10 Enterprise ? This is a migrated post! Originally posted on 20.12.2017 by user
Next Page