Recent Topics
Communication with IEC 61850 edition 1 and edition 2 simultaneously
Hello team, While communicating with IED Devices of both IEC 61850 Edition 1 and edition 2 simultaneously, is there any prerequisites/necessary settings that needs to be taken care off? Can both the Edition devices communicate with the same IEC 61850
Zenon to Siemens PLC Tag writing delay
Hello, In my project i have used Siemens CPU 319 and it is connected with Zenon Supervisor. With PLC i have connected many devices via profinet and Zenon supervisor too. Total no of PLC tags is 4500. Here i have recipe (RGM) and datalogging to MSSQL using
Copy Extended Trend between clients
Hi Support, I created filters in my extended trends screen (see picture attached, for example: G3_YUNCAN) in my client computer. Now i want to copy these filters to another client computer (I donÂ't want do it again, because there are a lot of filters),
Lot filter interaction
Dear all, I am trying to perform a combination of a lot filter, trend and report viewer in the same screen (currently using 7.20 version) They work well individually but I do not know how to get the name of the selected lot in the filter. Once I get it
Service - memory leak
Hello, Our service reads some data from archive each minute (using Thread). But when this service is running, Runtime memory increases continuously. Could someone help me to detect, what is wrong with this part of code: public class ServiceExtension :
VBA funktioniert nicht im WebClient
Hallo, wir haben das Probelm, dass in unserem Webclient kein VBA Code ausgeführt wird. Wir nutzen Zenon 8 (64Bit) auf einem WindowsServer 2016 Standard und zur Anzeige des WebClient den WebClientStarter auf Windows 10 (64Bit) PC's. In der zenon6.ini ist
zenAdminSrv & zenLogSrv not starting due to Error 1053
Hi, I have Zenon 7.10 Supervisory version installed at a EWS in Kuwait site. Till date, Zenon was working smoothly but I installed ABB PCM600 software and then Zenon services seems to be stopped working. So I uninstalled all the ABB PCM600 software and
Automatischen Start von "Project Configuration Wizard" abschalten
Hallo zusammen! Ich möchte gerne den automatischen Start des "Project Configuration Wizard" nach dem Anlegen eines neuen Projektes im Editor abschalten. Hat jemand eine Idee wie das zu bewerkstelligen ist? Das Addin "AddinProjectWizardWinforms" möchte
TIA Variablen Exporter
Hallo Zusammen, Ich wollte mit Hilfe des TIAProjectExporter einen Variablenexport machen. Nun kommt beim Start der .exe immer die Meldung "Warning: Initialization failed" obwohl ich die exe mit Adminrechte ausführe. Wenn ich eine .ap13 auswähle kommt
61850 remote server or client
I have v7.6 Energy Edition communicating to 61850 IED servers. I need to set up remote 61850 access sort of like a process gateway. Are there any papers or KB posts regarding this? Does it require a second driver instance? Thanks This is a migrated post!
Zenon 7.60 switch throw an dialog in runtime
Dear gents! I have migrated my project from Zenon 7.20 to 7.60 and faced with a problem. When I run it on my development PC and when any of switch buttons pressed (Start/Stop/Reset/etc.) the system throw up the dialog to modify spontaneous value, in the
Automatisches Logout für bestimmte Benutzer
Hallo, ich habe mal eine Frage zu dem automatisches Logout nach Ablauf einer einstellbaren Inaktivitätszeit. Wir haben von einem Kunden die Aufgabe erhalten, dass sich alle Benutzer automatisch ausloggen. Lediglich für einen benutzer soll diese Funktionalität
Alternativen zu Combi-Elementen, Störungen quittieren bei Fromen
Hallo zusammen, da in der HTML5-Lösung von Zenon keine Combi-Elemente im Browser dargestellt werden, bin ich auf der Suche nach Alternativlösungen. Mit Formen (Kreisen, Rechteck, Polygon, Linien) lassen sich Symbole erstellen, die die gewünschten Funktionalitäten
Read IEC61850 Command AddCause after select write successful
I am currently facing an issue with the IEC61850 SBO command AddCause. I read the command fail AddCause by using this command info variable: */Oper.AddCause The variable works fine if the failed condition already exist before select. However, if the failed
Supported OS
Which all windows OS is Zenon Compatible? Is it compatible on windows server 2016? This is a migrated post! Originally posted on 27.07.2017 by user joelprasad. Please be aware that information can be outdated.
How to clear cache values after connection loss
Hi Guys I have a Scenario where I am facing trouble I have many Relays and calculating the Total Current by adding all the current values of the relay. If suddenly the communication of one relay is lost then the value (that was updated before communication
SQL-Export vin Archiven
Hallo, ich möchte unsere Archivwerte in eine SQL Datenbank schreiben. Hier haben sich jetzt 2 Fragen ergeben: 1. Kann man die SQL Datenbank welche Zenon bei der Installation mit installiert dafü verwenden? 2. Bei meinen Archiven ist die Option speichern
Import Screens
Hello, I have a problem with screens XML import in Zenon [Zenon Editor Version 7.50 SP0 Build25796 32Bit]. I want to export all screens, update the data regarding screens in Excel and then import it back. I succeeded to export XML and then to open the
Autmatic write command at the every new start of Modbus TCP session
Hello! I am trying to communicate with diesel controller via Modbus TCP from Zenon EE 6.22 SP1 Build 0. Controller type is ComAp IG NTC BB. At the start of every new Modbus TCP session there must be (multiple) write command to ceratin register(s) in diesel
Create Custom Driver
I want to create a custom driver to connect the Zenon PC to another PC with TCP/IP via ethernet. The driver is created with zenDrvHelper and edited in C++ Visual Studio. The problem is there isn't any manual book to create custom driver, especially TCP/IP
Proble with Bachmann M1 Protocol
Hi Guys I have a problem while extracting signals from Bachmann protocol. I am having 10 wind turbines, and I need to communicate with all of them.I added the Bachmann Driver and configured all the turbines inside it. If I Extract signal from one turbine,
Success stories in tire manufacturing plant
Hi , I wonder if there are any success stories in the field of "Tire Manufacturing" , in Automotive industry . Please let me know if there is any, Thanks . This is a migrated post! Originally posted on 07.08.2017 by user parisa,taebi. Please be aware
DNP3 communication
Hello, I have question about DNP3_TG driver. I want to create communication with RTU (DNP3 Slave) via GPRS TCP/IP. But wap ip address of the outstation is not static. The case is that the slave initiates a session but the master does the polling so Zenon
Delta PLC AS300
Dear reader What driver is needed to integrate a Delta AS300 PLC into the Zenon SCADA? The Delta AS300 utilises Ethernet IP. Thank you kindly This is a migrated post! Originally posted on 11.08.2017 by user PaulRudolph. Please be aware that information
Zenon 7.60 Agoust Build
Hello, we have Zenon 7.60 on our systems (Build is 37399). Unfortunatly we open a defect for filters in editor (when you open the ... button and you apply a filter the second time you open the same button but variable is out of the filter the editor seem
Farben der Alarm- klassen - bereiche zur Runtime auslesen
Hallo, ich suche eine Möglichkeit die Farben der Alarmklassen sowie Alarmbereiche zur Runtime auszulesen. This is a migrated post! Originally posted on 09.08.2017 by user fundsWB. Please be aware that information can be outdated.
More Tags in Historian - will make runtime slow
Hi Team, I have Central monitoring system (CMS) & 4 plants (projects) integrated to it and each project has 3000 tags of event/alarm data that need to be archived. If I add all those tags, Runtime in CMS response slow. Can you guide for a solution? thanks
DATEI32 File Driver
Hello, I want to import data from "data" (csv) file To Zenon archives. One solution proposed from our local support is to use file driver "DATEI32 (but they didn't try) From help file : "The file driver supports the data exchange between zenon and an
Problem with Treiberkit760_SP0 when creating new driver
hello i have a problem with Treiberkit760_SP0 when i generated driver using zenDrvHelper.exe in directory D:\Treiberkit760_SP0\zenDrvHelper , on documentation DriverKit.pdf, Treiberkit710_SP0 is different folder structure when i got. when i compiled mydriver
Zenon Server-Client RT Licensing
Hi, Can someone please explain which licenses are needed for this configuration: 1x Primary Server (Historian, Ex-Trending, Message Control, Report Generator...) 1x Secondary Server (redundancy to Primary Server) 2x Client RT I know that the primary and
Benutzer Administrator Problem
Hallo, ich benutze Zenon Operator Version Version 7.60 SP0 Build36068. Ich habe ein Problem mit der Benutzerverwaltung. Der Kunde soll die Möglichkeit bekommen Benutzer zu entsperren, neue Benutzer anzulegen oder Benutzer zu editieren. Dafür benötigt
Zenon can be used as an CEM (continuous emmision monitoring)
Hi all, I am Huy from Vietnam. I want to know if Copadata has CEM software that is certified by environment agency? Thank you This is a migrated post! Originally posted on 23.08.2017 by user HuyMegatech. Please be aware that information can be outda
Download link for Zenon Analyzer 3.1
Nearly for past 2 weeks am in search of zenon analyzer software version 3.1. i have purchased analyzer license also. but till now i did't get the software. send me the link to my mail id: [email]harirajalu@gmail.com[/email] This is a migrated post! Originally
Storing every value not on change
Hello, I am using zenon opc client driver with external opc server. The trend is every minute and the sessions communicate on every 5 minutes with the opc server. In zenon I want to store every value received from the opc server not only the changed values
Trendkurvenprofil auf Server und Client gleich
Hallo, wir haben ein redundates Serversystem mit mehreren Web Clients. Nun haben wir von unserem Kunden folgende Aufgabenstellung bekommen: Wenn wir auf einem Client ein Profil für eine Trendkurve anlegen, soll dieses Profil ebenfalls auf dem Server oder
How To's available on GitHub
At https://github.com/copa-data there are How To's and training samples available. This is a migrated post! Originally posted on 22.08.2017 by user gerald.lochner. Please be aware that information can be outdated.
WebClient Probleme
Hallo zusammen, habe folgendes Problem, vllt. könnt ihr mir hier weiterhelfen. In Zenon haben wir zu Navigation ein eigenes Menüfenster angelegt. Um dieses zu verlassen können wir einfach außerhalb dieses Fensters klicken (Schließen bei Fokusverlust).
Notifier APP
Is there a way to change the Alarm Sound for incoming SMS? This is a migrated post! Originally posted on 24.08.2017 by user cermakbenjamin. Please be aware that information can be outdated.
64-bit VBA code for file browse
In case anyone needs to get a 64-bit file browser working here's how I got it to work (code adapted from code written by someone much smarter than me online). I used this code for browsing files from within the editor... YMMV if using in the runtime (which
Communication Problem with Simens S1500
Good morning, I write because I have a problem with the communication between PLC and Zenon Runtime v7.50 installed on an industrial pc with Win7 x86. I've alredy set up the driver (S7-TCP IP) with the correct CPU adresses, put the remote TSAP 02.01,
Next Page