compare runtime files and backup
Hi, We need to make some changes on running zenon 7.00 system with 2 servers and 2 clients. We have a backup that we restore on a development station but we are not sure if this is the final revision. So is there a way to compare runtime files on servers
zenon_startup.exe - System Error
Hi Zenon Community, I have Installed Zenon 7.50 Build 30617 at my Windows Server 2012 R2. Setup was successfully installed but when i tried to open Zenon Startup Tool or Editor the following error appears- "The program can't start because api-ms-win-crt-convert-i1-1-0.dll
Zenon 7.60 editor (32 bit or 64 bit) Build 39532 Freezes when started
Hi, I've installed Zenon 7.6 build 39532, when i tried to launch the Editor (x64 or x32) it starts showing the workspace but after that directly freezes and doesn't response at at all. Thanks for you help. This is a migrated post! Originally posted on
Zenon editor 8.2 install fails, due to SQL Server Rules Check code (-1)
Brand new to Zenon software. The Zenon 8.20 software refuses to install. Its hanging on SQL Server install rules check. Iâ€™ve tried Win7 (before I found out Win7 can't run the editor!), and also a brand new Win10 Enterprise vm box with no other softwares
Opening Zenon 6.21 SP1 project in Zenon 6.22 SP2 :-
[SIZE=2]Dear Users , I tried opening up a Zenon 6.21 SP1 project in Zenon 6.22 SP1 and got the following message . [/SIZE][SIZE=4]!!! Attention! Direct access to variable values via VBA is now limited . you have to check and adjust VBA macros . For more
Process gateway connection problems
Hi, I have scada control system is connected with zenon software, and when I try to control some devices I must uncheck 'select routing' on checkbox process gateway so what mean 'select routing'. And if I want control with SBO from Control center but
system table version change possible?
Hi Team, I developed a project in 7.5 and I want to use it in a 7.11 installed machine? Is it possible? I noticed those project when i open in 7.11, the system table version is 7.5 . Could it be possible to change that version back to 7.11 and can be
Zenon 7.11 , 7.2 and 7.5 will support windows 10 Enterprise?
Hi Team, Great thanks to the entire support Team. All my queries has been answered by the COPADATA Team. I have a query now, Did Zenon 7.11, 7.2 & 7.5 will support windows-10 Enterprise ? This is a migrated post! Originally posted on 20.12.2017 by user
Issue connecting ZENON 7.11 to S7-1200 (Programmed with TIA portal)
Good day, I hope this email finds you well. My name is Sonia. I am busy testing ZENON 7.11 software to communicate with a S7-1200 Siemens PLC. I am running the ZENON 7.11 on my personal computer for testing ( no HMI involved at this stage yet) and directly
ZenAdminSrv not starting anymore
Hello, on a plant installed a year ago, my customer has a problem when starting one server. The message box "Waiting for service â€˜zenAdminSrv" appears when starting the project. The message box does not disappear and the project never starts. I asked
Need step by step procedure (with image if possible) to use dongle Wibu-Key for Zenon 6.22 SP1 licencing
I have Zenon 6.22 SP1 Build 0 with Dongle (Wibu-Key). I have installed Zenon 6.22 and Wibu-Key V- 5.22 on Windows XP Pro 64 Bit. Wibu-Key software find dongle when plugged-in. Wibu-Key Server also stat having dongle specified information on status. But
zenon 7 runtime mit windows 10 kompatibel?
hallo, ich möchte näschte , ein Runtime von einem im zenon 7.0 sp25 entwickten projekt mit Windows 7,in einem industry PC mit windows 10 installieren, wird es zu kompatibilitätproblem führen??? mfg This is a migrated post! Originally posted on 02.05.2018
Showing popup user32.dll
ZenRt32.exe Entry point not found , the procedure Entry point close touch Input could hand could not be located in the dynamic Link library user32.dll This is a migrated post! Originally posted on 17.07.2018 by user jarvis. Please be aware that information
SICAM 230 Editor Licence
Hi Team, I am facing issue with SICAM 230 Editor licence. I have a Wibu key [Dongle], Licence sheet, Serial 7 , SICAM 230 Key7 , Activation Key 7 placed in zenon6 ; C:\ProgramData\Siemens\System My licence below; ACTIVATIONKEY7=2XXXXXXa SERIAL7=8XXXXX1.101006.8.0
How to activate Zenon license with dongle
I want to know how to activate Zenon 5.5 with dongle. Please give me step by step procedure picture. Thank you. This is a migrated post! Originally posted on 10.06.2018 by user duurbeen. Please be aware that information can be outdated.
If then - Conditions
Hi all, I want to use "IF" "then" conditions with 61850 tags where and How can I ? Thanks in advance This is a migrated post! Originally posted on 11.05.2017 by user saravanan1985. Please be aware that information can be outdated.
Edition falsch
Hallo, ich habe zenon 7.5 installiert und den supervisor genommen. Beim öffnen von Zenon wird jedoch die Energy Edition geöffnet, für die ich keine Lizenz habe und die ich auch nicht will. Wie kann ich as hinbekommen, dass der Supervisor geöffnet wird?
Zenon 6.22 SP1 Build 0 and Zenon 6.22 SPS1 Build 17
Good day. I would like to know what differences it means to have one build and another. Can you modify a program in a version of buil and run it in another version of build? Can errors occur while doing this? This is a migrated post! Originally posted
Sicam230 Editor V7.20 - Bilder nicht sichtbar!?
Guten Tag Ich habe eine Sicam230 Editor V7.20 installiert. Die ganze Installation inkl. Registrierung hat reibungslos geklappt. Nun habe ich ein bestehendes Projekt importiert. Die enthaltenen Bilder sind jedoch nicht sichtbar wenn man sie öffnet (nur
Zenon up gradation from 7.0 to 7.50
Dear Support, Can you please help out in up gradation of my running system from 7.0 to 7.50. I am having project running on zenon ver 7.0 but for more features i want to upgrade my system to 7.50 without disturbing my previous system. so can you please
Error file fpm.cmp in Zenon 6.21 SP1
Hi, I have a HMI with Zenon 6.21 SP1 installed, so i used the Zenon 6.21 SP1 Editor version to send the project to the HMI, but now the following error appears: ERROR: "The file 'fpm.cmp' has version 6.22 SP1 - but the project has version 6.21 SP1!" Anybody
Screen switch based on receipe
Hi i have a screen switch function that I run based on a variable state change, easy enough but I only want it to run if a receipe value is non 0. easy to do or will it have to be VBA? TIA This is a migrated post! Originally posted on 06.07.2017 by user
Zenon 7.0 ZenWorkspace.vba not working in fresh installed Windows 7 32 bit PC
Dear, I am working with Zenon 7.0 which is working perfectly in any Windows 7 32 bit PC where already many software are installed. But in freshly installed Windows 7 32 bit PC, only framework related functions are not working. The software is getting
Zenon 7.5
1. command Processing is not working where as same configuration in the IED is working fine with Zenon 7.2., Please advice . 2. PRP Driver is tested and not working as per the configuration performed in help. both LAN-A and LAN-B Link are active and send
Zenon 7.50 SP0 zenAdminSrv is not started!
Hi, During Zenon 7.50 installation on Windows 7 Embedded Standard, a popup advised me the the zenAdminSrv is not started. Original message is wrote below: The service "zenAdminSrv" is not started! Due to this the startup tool can not be started! Please
zenon 5.5 sp3 and windows xp pro spx
Is possible to install 5.5 sp3 on windows xp pro sp2 or sp3? And then run runtime on this o.s.? This is a migrated post! Originally posted on 03.11.2015 by user aleb2. Please be aware that information can be outdated.
Zenon 7.20 SP0
Hello support, I am trying to install Zenon 7.20 in windows 7 professional SP0, but error appears that operating system not supported. Please advise. Thank you in advance. This is a migrated post! Originally posted on 08.08.2015 by user yara. Please be
zenOn 7.20 (SQL Service Starting)
Hi, I am trying to install zenOn 7.20 SP0 on my laptop. I am using Windows 7 Professional SP1 Operating System. Installation progress remains at SQL Service Starting and does not go beyond that. Could you please tell me the possible cause of this? Appreciate
Error during Installation zenon7.20
Dear all, Good time Could any one please suggest about problem cabinet file corrupted, when I install zenon 7.20 : ERROR: Error 1335.The cabinet file 'Data1.cab' required for this installation is corrupt and cannot be used. This could indicate a network
zenon 7.20 SP0 - Installation Wizard; Warning: 1946
Hi zenon community! There could be an issue during installation. we have also seen this behavior on Windows 7 â€“ but as Microsoft mentioned: This behavior is by design. You can safely ignore this warning message. Microsoft-Support This behavior sometimes
Upgrade from zenon 6.50 tto zenon 7.2
Hi We want to upgrade our system / database from 6.50 to 7.20. We will upgrade OS system from window server 2003 to 2008 64bit for extension memory, SQL from 2005 to 2012. But we still concert that zenon database upgrade from 6.50 to 7.20. Do we need
Lizensierung
Guten Morgen, wie sieht eigentlich die Lizensierungs Politik bei Zenon aus? Gibt es noch die Möglichkeit neue Lizenzen oder „nderungen an bestehenden Lizenzen, z.B. Variablenausbau für 6.51 oder ältere Versionen zu bekommen? Jürgen Berger This is a migrated
license problem
Hi all I have zenon 7.10 and it's licensed and editor works fine. but have problems with zenon logic. if I chack my license properties, there is writen that It suports zenon logic workbench, - pro, but if I start zenon logic, the first 15 minute it works,
USB Dongle
On my USB Dongle is written "Version: 6.21/1" Can this Dongle ONLY be used for Zenon Version 6.21 SP1 or also for 6.22? I have V6.22 installed, but when I enter the Serialnumber and Activationnumber from the Stick, I never get the OK button of the Window
Zenon editor 7.11
Hello I have zenon editor version 7.10 i want to update in 7.11 but is not possible how i can do it ?? Thank you. This is a migrated post! Originally posted on 16.02.2015 by user hajjsaid99. Please be aware that information can be outdated.
Zenon 7.0 Runtime
Hello Support, I have zenon 7.0 runtime installed on one gateway with windows XP embedded, we are facing an error(Unhandled Exception OR Window Dump), I am using process gateway also there. Please advise. This is a migrated post! Originally posted on
Zenon Editor v7.11 SP0 Build10238 can't be started!
Hi, :) Zenon Editor can't start, however Runtime has no issue to run. Editor is running well previously, however it can't be started now, no error message, no response, even re-installation can't solve the problem. ZenSysSrv.exe, ZenDBSrv.exe, and ZenDBAdmin.exe
Zenon License
Dear Support Team, I need a small confirmation about the Zenon License. Our customer is having the SCADA of Zenon 6.51 with License. They would like to update this into Zenon 7.00. So can we able to use the same license (Zenon 6.51 license) in the updated
Zenon 7.11 Installation Error
Dear Support Team, I am trying to install Zenon 7.11. The installation is completed and working good. But there was a Error occurred in between the installation process, after ignoring that error by clicking "yes" then the installation completed. Please
Zenon Installation Error
Dear All, I am trying to install Zenon7.00 in Windows XP(SP3). The installation was not completed due to the Error ("Requirements not fulfilled, installation cancelled"). I think this is due to Microsoft Power Shell is not available in the PC. This message
Next Page

Disclaimer

This document governs the use of our Community Forum. By registering and using the platform, you accept these conditions.

The COPA-DATA Community Forum serves to encourage the exchange of information and experience about the zenon software between forum users respectively zenon users.

Please mind that any published information on the Community Forum is the subjective opinion and view based on the experience and the level of knowledge of the author. COPA-DATA does not overtake any responsibility for the content and the accuracy of the shared information.

Users of the Community Forum are encouraged to share only well-founded experiences and to point out any risks associated with the implementation of proposed solutions to problems. COPA-DATA at its absolute discretion, reserves the right to moderate the forum. In this connection COPA-DATA may remove any information containing false facts, potentially dangerous solutions, bad language or content that may insult, degrade or discriminate others. COPA-DATA may block a non-complying user from forum access if the user violated this provision.

COPA-DATA reserves the right to change this document from time to time at own discretion.

Ing. Punzenberger COPA-DATA GmbH
Karolingerstraße 7b · 5020 Salzburg · Austria
www.copadata.com

COPA-DATA Self Service Portal

compare runtime files and backup

zenon_startup.exe - System Error

Zenon 7.60 editor (32 bit or 64 bit) Build 39532 Freezes when started

Zenon editor 8.2 install fails, due to SQL Server Rules Check code (-1)

Opening Zenon 6.21 SP1 project in Zenon 6.22 SP2 :-

Process gateway connection problems

system table version change possible?

Zenon 7.11 , 7.2 and 7.5 will support windows 10 Enterprise?

Issue connecting ZENON 7.11 to S7-1200 (Programmed with TIA portal)

ZenAdminSrv not starting anymore

Need step by step procedure (with image if possible) to use dongle Wibu-Key for Zenon 6.22 SP1 licencing

zenon 7 runtime mit windows 10 kompatibel?

Showing popup user32.dll

SICAM 230 Editor Licence

How to activate Zenon license with dongle

If then - Conditions

Edition falsch

Zenon 6.22 SP1 Build 0 and Zenon 6.22 SPS1 Build 17

Sicam230 Editor V7.20 - Bilder nicht sichtbar!?

Zenon up gradation from 7.0 to 7.50

Error file fpm.cmp in Zenon 6.21 SP1

Screen switch based on receipe

Zenon 7.0 ZenWorkspace.vba not working in fresh installed Windows 7 32 bit PC

Zenon 7.5

Zenon 7.50 SP0 zenAdminSrv is not started!

zenon 5.5 sp3 and windows xp pro spx

Zenon 7.20 SP0

zenOn 7.20 (SQL Service Starting)

Error during Installation zenon7.20

zenon 7.20 SP0 - Installation Wizard; Warning: 1946

Upgrade from zenon 6.50 tto zenon 7.2

Lizensierung

license problem

USB Dongle

Zenon editor 7.11

Zenon 7.0 Runtime

Zenon Editor v7.11 SP0 Build10238 can't be started!

Zenon License

Zenon 7.11 Installation Error

Zenon Installation Error

Next Page

Disclaimer