trail version
Hi, is there any trial version for assessment of batch control module? This is a migrated post! Originally posted on 14.05.2022 by user JalalTavasoli. Please be aware that information can be outdated.
Zenon8.20 Installation Failed
This is a migrated post! Originally posted on 01.03.2022 by user Chaitra123. Please be aware that information can be outdated.
sql user "zenonSrv" does not exist
Hi, zendbsrv is not running therefore or starting and stopping the next moment. Because of SQL -Server connection is not available. Actually the related service are running. The problem is with the user login of user: zenonsrv. The zendb.ini looks like
Windows Server 2022 - Zenon V10
Hallo, ist es schon absehbar, wann Windows Server 2022 für Zenon V10 freigegeben wird? Ich plane gerade eine Hochrüstung auf Zenon V10 und überlege, ob ich dirket Windows Server 2022 einsetzen könnte. Viele Grüße markh This is a migrated post! Originally
VSTA cannot enable
Hi, everyone. I hope everyone well. I have some problem. I cant enable VSTA from Application>Options. When I try to enable it, the progress windows is appear a while that close the Application Setting windows. I hope anyone can guide me to solve this
Zenon 10 installation failed. Reported "Error 0x80070643: BA aborted execute begin"
Need help! Failed to install Zenon 10 in Windows 10 (20H update). Tried numerous way (uninstall VC redistributable, .net, DB...), no clue how to solve this. The LOG show errors below (or can get the full log in attachement): [3404:1BB8][2021-09-04T22:04:44]i000:
? disable/unistall editor and keep runtime
Hi, here on our servers, zenon editor 7.60 and zenon runtime 7.60 are installed. Now I would like to disable/uninstall the editor, but keep the runtime. I would like to do this, because the SQL server sometimes produces a lot of CPU load, such that the
Modify Element group in Element Group
Hi, I am struggling to find a way to modify an existing element group(e.g.: change visibility of it) after it has been added to another element group without converting it into a symbol. Is there a preferred way? My current workaround is to disband top
zenon Editor-Installation wenn Runtime schon installiert ist
Hallo, ich habe auf einem Rechner zenon Runtime V8.20 installiert. Nun möchte ich nachträglich noch zenon Editor installieren. Wenn ich das Setup ausführe, kann ich aber "Editor" nicht auswählen. Muss ich zuvor die Runtime deinstallieren, oder wie wäre
[QUESTION] How To Download Zenon Software on Download Tab?
Hello! I'm interest with Zenon software, I want to download Zenon 6.22 SP1, but I can't download it on Download Tab. Tks Hend This is a migrated post! Originally posted on 11.12.2020 by user hendra. Please be aware that information can be outdated.
Zenon_6.51_SP0 and Siemen S7- 1500 PLC
Hello, I have a license for zenon_6.51_SP0 . It is possible to use this version with Siemens PLC (TIA S7 -1500 series )? Which driver do i have to use? The driver which I have used for Clasic S7 - 400 / 300 is not working with TIA PLCs. Thankyou! Raul
Restore backup fail. Create SQL Database
Hello trying to restore an backup and i get fail. In Diag viewer i get the fault it cant create sql database. See picture below. Any fix for this problem? Also i cant create a new project. This is a migrated post! Originally posted on 04.11.2020 by user
White screen in the Runtime for the subproject
Hi, We were coming across a problem in the zenon Runtime, while opening the sub-project, screen is showing a white screen which not allows to show the symbols, elements and even the lines. below attached the image for reference. The project is running
Codemeter Fehlermeldung
Lizenz mit 9 Zenon EE Clients V8.10 kann Lizenzausleihe nicht mehr beenden und die Lizenz den HW-Dongel zurückgeben. Bekomme die Fehlermeldung: a previously attached CmContainer is no loger avaibale, Error 70 Was kann ich machen um diesen Fehler zu beheben?
zenon installation fails
Hi Support, My colleague is trying to install zenon V 8.00 but receives the attached errors. He has SQL 2014 already installed on his laptop. Do you think that is the reason, sql cannot be installed? Any solution? Thank you, Shahrzad This is a migrated
Pmi526 hmi issue
I got this message error. Error: File 'template.cmp' has version number 5.50 sp7. But project has version number 5.21 sp2. Please help. How can i transfer project Between two PMI526 HMI. This is a migrated post! Originally posted on 12.09.2020 by user
Information Of Server-Client system
Hi everyone, My system (as image) include: + 2 Server PC + 2 Guest PC + 1 Development PC Please tell me details: + Requiement Configuration for them??? + What's the Windows version for Server, Guest, Development PC??? + How to Install Zenon in them???
Trouble on installing Zenon 7.60 Editor
Hi zenon community! I have a problem on installing because of Microsoft SQL Server Express Advance SP3. Is there any way to solve this? This is a migrated post! Originally posted on 29.06.2020 by user haxziq. Please be aware that information can be
Problematik von USB-Dongle
Hallo zusammen, Ich habe jetzt aber Problematik bei der Erkennung der USB-Dongle. In CodeMeter Control Center ist die USB-Dongle erkennt, In PC Laufwerk ist die USB-Stick erkennt, aber in Lizenzverwaltung ist sie nicht erkennt. Wie kann ich dieses Problem
Connecting OPC DA server to zenon Editor
Hello everybody. I am just starting to learn SCADA Zenon and cannot understand how to connect an OPC server with tags This is a migrated post! Originally posted on 08.06.2020 by user razorqhex. Please be aware that information can be outdated.
Cannot Compile Zenon 7.10 after finishing the modification in Zenon Editor
Hey guys, I got the trouble with the Runtime file. When I finished my modification --> Creat all --> Start Run time and I found the problem like this: Can you help me to solve this one? Big Thanks. Tran Van Phung This is a migrated post! Originally posted
Problem with the runtime installation of zenon 7.60 SP0
Hello, I have a problem with the runtime installation of zenon 7.60 SP0, during the installation I have the message I have no problem on another machine, who can help me? This is a migrated post! Originally posted on 25.05.2020 by user henneuse_alain.
104 Driver Error
Good Afternoon, I am adjusting an old V460 project, made in version 6.51. The project is running correctly in a substation and I am using the back-up of this system. To configure the project I am running VMware with windows XP on a windows 10 computer.
ZenDbSrv Issuse
Hi, I have an issue in Opening the Workspace/Eidtor. While opening the editor, Error is Showing as ZenDBSer.exe not running. When Internet is disconnected from PC, then its working fine. Zenon Version used : Zenon Energy Edition 8.00 I tried doing standard
Reg - Unable to run startup tool
Hi Team, I am unable to run zenon startup tool . Refer to below screen shot. Tried re-installing software 7.6 also. not successful. Regards Sarav This is a migrated post! Originally posted on 10.03.2020 by user saravanan1985. Please be aware that information
Füllfarbe, Linienfarbe von einer Grafik in einem Combi-Element
Hallo an alle, ich stehe gerade vor einem Problem wo mir die genaue Umsetztung noch nicht klar ist. Ich möchte ein Ventil-Symbol erstellen, wo sich durch Werte Ausrichtung, Füllfarbe und Linienfarbe anpassen lässt. Als Grundbasis habe ich an zwei PolygonElemente
Combi-Element Funktionsaufruf mit Subtitution
Hallo an alle, ich arbeite mit gerade in den Zenon Editor 8.1 ein. Für eine Anlagenübersicht habe ich mir ein Icon(Symbol) zusammen gestellt, welches je nach Variablenwert ein anderes Symbol anzeigt. Jetzt möchte ich durch einen Klick auf das Symbol ein
YOKOGAWA DCS to zenon OPC-DA communication
Hi I am investigating on establish connection between zenon SCADA and YOKOGAWA DCS by OPC-DA. As the DCS system is an old legacy system installed on site, there is no other way to make communication with them except OPC-DA. In such a situation, is it
Couldn't create new project
I have Windows 10 with Zenon 8.00 (Demo) on board. Can you tell me, why i can't create new project ? I'm getting this message: Queries to the database server on the computer 'localhost' are not possible! Possible reason: missing authorization. https://www.dropbox.com/s/xgufxtemluz3vpm/temp1.png?dl=0
Reinstallation V6.51
Hallo, ich habe hier ein altes Notebook mit Windows 7 wo die Editor Versionen 7.50 und 6.51 mal installiert waren. Ich wollte jetzt die Version 6.51 wieder neu installieren aber leider scheitert das an den SQL Server Resten auf dem man laut Install Programm
Saving Zenon configuration
Is there a way to save zenon configuration to a non binary text format. We would like to be able to review, share and save configurations etc Saving a binary or project makes it difficult to share a screen among projects without having to manually duplicate
How to convert zenon runtime files to zenon editor?
Hi, In my company I have a controller PLC that connects to zenon runtime. I would like to change the program but I don't have a project. Is there any way to convert the runtime project to editor project? I am asking for some tips. Thank you for your help.
Move a software-dongle license to a hardware-dongle
Hi, what are the correct steps to move a license from a software-dongle to a hardware-dongle? Is there a guidance from Copa Data? This is a migrated post! Originally posted on 06.12.2019 by user its_me. Please be aware that information can be outdat
Control Functions via PLC (S7-1500)
Hello everyone! I'm pretty new in the Zenon Editor World! Currently I'm using V7.6. The preperation for my Bachelor Thesis includes programming an Interface module (Multi-Instance FB's) in TIA Portal V15 for the Batch Control Module in Zenon. Right now,
Can't install Zenon 8.10
Hi, do you can help me? I can't install zenon 8.10. screen - https://prnt.sc/os23zn button for install "zenon Editor" is disabled. In begin I was need to change my zenon version 7.60 to 8.10, but when I install zenon 8.10, it don't work. Don't work Demo
Elements are not visible on screen editor
Hello, I'm starting using Zenon for the first time and I've installed the version 8.00 on my laptop windows 7 Pro 64. I'm having a dificulty when creating new screens because when I try to add an element (button, combo box, line, etc..) the object is
what can i do with a *.hbf file (project backup to USB)
can anyone assist please...what can i do with a *.hbf file (project backup to USB) This is a migrated post! Originally posted on 15.03.2019 by user diggers. Please be aware that information can be outdated.
Where can I find ZenOn PC Runtime V5.5 SP7?
I only need the installer of ZenOn PC Runtime Version 5.50 SP7, to install in another PC because the PC where was installed it, damaged, and I need to migrate the proyect to another PC in order tu Run the machine again. I don't need to edit, I only need
Edit time variable in Recipe Value List.
Hi, I want to make editing time variable in Recipe Value List easier for operator. Now time variable is DINT variable and it repesents seconds. So if operator want to set it to f.e. 10 minutes 30 second he must do some calculation to change minutes:seconds
How to increase TOOL TIP time
Hello everybody :) I would like to know how is possible to change (increase) Tool Tip time. I use Tool Tip text on the invisible buttons for description in case of mouse cursor is on this buttons, but these Tool Tips disappear after 5 seconds. Is any
Next Page