Variable set is not variable being displayed
:confused: Hello, I am looking for some help on Zenon 6.20. I recently had a pc go down on site where i had to build a new one and install zenon. I then remotley sent out the project to the target pc which was no problem apart for a small issue where
XML Dateien zusammenführen
Hallo, Ich möchte für eine Applikation Dateitypen, Variabelen, Funtinen, Scripte, und Bilder am einfachsten in verschiedene Projekte importieren. Ich dachte dabei an den XML Import. Im Texteditor könnte ich dann den neuen Variablen/Bilder usw Namen mit
Wrtite results from report to variable
Hello, How can I automatically write a calculated value from a report to a variable. Example, when an average value of a certain PLC variable is calculated inside a report, How can this value be transferred to the PLC again. Thanks in advance, thafox
Backup 6.51 in zenon 6.50
Hi, I have PC with installed zenon 6.50 SP0. How can I restore backup of the project made in zenon 6.51 SP0? This is a migrated post! Originally posted on 15.02.2012 by user croc. Please be aware that information can be outdated.
how get .dll/.ocx files for activeX version 6.0 ?
I have to restore a project in which a treeview control (vb version 6.0) is used. I use win xp and from the zenon dialog for activex elements, the only Microsoft TreeView Control I can select is version 5.0 . Can anyone provide me the right .dll and/or
"file does not exist !" after recovery - files .cmp
I just recovered on zenon 6.51 a .wsb file of a full working project. when I start the runtime I get the following message for each subproject: File does not exist! projectName1: C:\Documents and Settings.... \RT\FILES\zenon\system\ variables.cmp scripts.cmp
How to show alarms with status bit "Revision" in alarm list
Hi, How to show alarms with status bit "Revisionž1" in alarm list. I try to use alarm filter with status revision bit 1 but nothing shows in rema where revision bit is 1 chek mark checked in alarm list. But in runtime alarm list is empty. How to create
Historian
Hi, The required archiving cyclic scan time is ten seconds for the extended trends. But in the report we need to display the values of the parameters logged every half an hour. Is there a way to achieve this type of archiving without creating two separate
Alarm functions
Hi, I want to deactivate / activate a particular alarm in runtime. I cannot use the "Activate/deactivate Alarm Message list/Alarm groups/Alarm classes" function for it since it deactivates the entire alarm group and not just a particular alarm. In the
Archiv-Report mit Tasten für vor- und zurück-Zeitfilter ?
Hallo, ich habe diese Schichtreports definiert (basierend auf einem 8h-Zyklus-Archiv): Früh 06:00 - 14:00 Tag 14:00 - 22:00 Spät 22:00 - 06:00 In einem œbersichtsbild gibt es zu jedem Schichtreport eine Anwahltaste. Bevor der Report dann geöffnet wird,
Writing a value using functions and redundancy
Hello, I am currently working on the redundancy between two computers using ZenOn 6.51 SP0 Build 5. In our project, we use the "Write value" function, available on the Editor, in order to put, manually, a string in a variable. It works fine when there
"Offline"-Folgearchiv zeigt Werte vom Rohwertarchiv
Hallo, ich habe ein seltsames Verhalten bei der Archivwertanzeige im Bildtyp Archiv-Nachbearbeitung. Ich habe einige Stand-Alone Systeme mit laufendem Archiv. z.B. gibt es ein Rohwert-Archiv A1, mit 1 Sekundenwert-Abtastung und 5 Min Speicherzyklus. Darauf
Questions regarding functionality
Hey there, I ordered my zenon Science Package for LEGO on the 13th but am still eagerly awaiting its arrival. However, I have a couple of things I'd like to know more about: The firmware is a custom one but looks a lot like the standard firmware. Is this
Operating System Shutdown throw Zenon
Hello Support, Is there any why to shut down the operating system throw Zenon, i have one digital input, i need to shut down the windows after 20 mints if the value of this digital input changed from "0" to "1". Thanks in advance. This is a migrated post!
License
Hi, we received a dongle key from zenon (code meter). we can see the serial number in the code meter tool and another number on the dongle. But we are not able to activate the license. How do we proceed to activate the license? TIA This is a migrated
VBA and CE
Hello, If i write code on VBA which zenon energy edition has it, i can run it with Zenon CE, i mean dose zenon CE supported for VBA programming language? Thank in advance This is a migrated post! Originally posted on 22.01.2012 by user yara. Please be
Date Tables
Hello. For our plants we have some efforts to show data in a table like the ms flexgrid activeX. The source could be variables out of PLC's or a database. The amount of colums and rows should be adjustable while editing. If the entries will be too much
flashing when value change
I am using combi element. Value 0 1 2 3 I want to see flashing element when value is changed. And I want to acknowledge this flashing. And where I can see status of value? This is a migrated post! Originally posted on 19.01.2012 by user focus. Please
Events im Editor
Hallo, hab zur Zeit die Aufgabe ein Vorlagebibliothek mit Symbolen etc. zu erstellen. Dabei bin ich auf folgendes Problem gestoßen. Wenn man z.B. ein Symbol für ein Förderband erstellt, welches aus zwei Kreisen und einem Rechteck dazwischen besteht, dann
Movable element in Runtime
Is this really make element, which I can move on screen in Runtime? This is a migrated post! Originally posted on 18.01.2012 by user focus. Please be aware that information can be outdated.
Movable element in Runtime
Is this really make element, which I can move on screen in Runtime? This is a migrated post! Originally posted on 18.01.2012 by user focus. Please be aware that information can be outdated.
Fehler beim Erstellen der Projektsicherung - Timeout
Hallo Support, ich bekomme Fehlermeldungen beim Erstellen einer Projektsicherung eines zenon Projektes in 6.51.SP0. Laut der Timeout Fehlermeldung vermute ich, das zenon es nicht schafft durch die große Größe an Grafiken von über 250 MB (Anzahl 250 Stück)
Bildwechsel in abgemeldetem Zustand?
Hallo zusammen, besteht beim webclient die Möglichkeit, im abgemeldeten Zustand Funktionen auszuführen? Konkret: bei Auftreten eines Alarms ein anderes Bild aufzurufen? Viele Grüße, Michael This is a migrated post! Originally posted on 17.01.2012 by user
CEL issue when use ? symbol in filter
Hello! We have 3 alarm classes in our project - alarms and two types of warnings. When in CEL filter we select Alarm Classes = - All alarm classes and Indentification = *, only internal messages (with empty Identification field and message = Modify Spontaneous
Variblenwert in Variable schreiben
Hallo, ich habe folgende Anfoderung, wenn ich auf einen Button klicke, soll der Wert (Int) einer Variable in eine andere Variable geschrieben werden. Die Zweite Variable ist eine Index Variable, wenn der Wert übertragen wurde sollen Bildumschaltfunktionen
6.22 -> 6.51 Trend Cursor not shown
Hi I have converted our project from 6.22 SP1 to 6.51 SP0, the graphs are drawn fine, but when I use the cursor, it writes the correct title(s) and sometimes shows a single value but Im not able to move the cursor with the mouse. Is this something you
Verteiltes Archiv ?
Hallo, ich habe ein Integrationsprojekt mit 4 Subprojekten. Jedes Subprojekt läuft separat nochmal auf einem eigenen PC. In jedem Subprojekt ist ein Archiv (1 Sek. Abtastzyklus) mit Folgearchiven (z.B. 5 Min) projektiert. Aufgabe ist es nun, dass die
Edit .PRJ files
Hi everyone! Now,my company have some .PRJ files with zenon vesion 6.20 SP1, Please tell me, how can i open and edit it on zenon 6.20 SP1 or zenon 6.22 SP1. i was convert .PRJ to .ZIP, and try open it on zenon 6.22 SP1, but i got error "Database cannot
Dynamic limit texts in structure datatypes
Hello. For our cicumstances we have a big benefit by using structure datatypes. But there is the following issue where I did not know a solution: We need to use dynamic limit texts to display and archive alarm numbers (e.g. alarm number of a servo drive).
Dynamic limit texts with hexadecimal value
Hi. I want to create a limit text for an error of a servo motor. The error code is provided by an additional variable. But the error code should be displayed hexadecimal. e.g.: limit text (dynamic limit text format) @keyword %var First comes the text
GI Status Bit in REMA
Hello guys, Is it possible to use GI status bit in Rema as it used in combi element? I don't want to send all alarming data to CEL after connection established after broken line (INVALID becomes 0). If process Object comes with Interrogated status IEC-60870
Math-Var: Zugriff auf Unterprojekt-Variablen
Ist es wirklich nicht möglich in einem Dachprojekt eine Math-Variable einzurichten, die sich aus Variablen aus div. Unterprojekten zusammenstellt :confused: Im Projektbaum werden keine Unterprojekte angzeigt: This is a migrated post! Originally posted
How to make Alarm Status Line Frame movable
Hi Everyone, I have another question. In my project. i can able to move and alter the size of Alarm Status Line Frame. But i cant remember how i did it. Can you please remind me. Thank you. This is a migrated post! Originally posted on 20.12.2011 by user
Database Capacity
Hi, I have a host running Zenon with a 70GB partition reserved just for Zenon's data logging. If the data is logged every 6 hours, will this partition of 70GB be enough? Noman Rauf This is a migrated post! Originally posted on 17.12.2011 by user nomi589.
Database Limitations
Hi Zenon Experts. I would like to ask about Zenon's Database structures and limitations. In during runtime and if ever the SQL crashed. would that affect the Zenon runtime. and also about the database capacity of Zenon like for about 5 years. Thank you
Gprs Modem Configuration
Dear support I have GPRS Modem for sending alarm message. It is connect with server via serial cable RS232. I need to know how to link it with zenon 6.51 thanks This is a migrated post! Originally posted on 17.12.2011 by user tanveerali. Please be aware
Different drivers in one structure datatype
Hello! I have logically joined variables that i want to combine into one structure datatype. This variables are connected to different drivers - iec104, internal and math. As I understand, structure-type based variable can be attached to only one driver.
Drehpunkt verschieben
Ich muss mitunter Objekte drehen, bei denen sich der Drehpunkt weder an einer Kante, Ecke oder im Mittelpunkt befindet. (Beispiel Knickarm Roboter) Zenon bietet hier keine direke Möglichkeit. Ich behelfe mich indem ich einen unsichtbaren Button so groß
data from multiple meters in one report
Hi, I want to make a report which will show e.g. 10 tags from archive of like 100 meters. So, functionality is like, operator will select a meter first and then report should be opened which will show data of 10 tags associated with that particular meter.
Filtern nach nicht verwendeten Variablen
Hallo, gibt es eine Möglichkeit, nach nicht benutzen Variablen zu filtern? Ich habe die Situation, dass ich einige Projekte bekommen habe, in denen der Anlagenbauer einfach alle zur Verfügung stehenden Variablen in Zenon importiert hat, ob sie nun benötigt
Next Page