Installation Error
Please find attached image this error occur in installation v11
Migration of SICAM 230 V7.2 into Zenon V14
Hello Gents, Can anyone help me with the exact process of migrating SICAM 230 v7.2 into Zenon 14? I need the following information: Specific Licenses required for Migration other that Zenon Editor, Runtime Licenses Specific Tools or wizards required for
Support for AML AND CEL
Greetings all, I'm looking for your support . 1, when the value reach the limit but there is nothing showing on AML. it has shown on the CEL screen. i have activated alarm message list AML acivated nothing on AML screen 2, The second thing is i want to
System error: -2147024786
I installed v14 by mistake, I mean, it was not the version we need to perform my job. Then I uninstall it and try to install v12 but it showed that error during Engineering Studio install. I'm running W10 Pro 22H2 on a virtual machine VBox V7.1.4 and
RGM duplicate recipe with initial status
Hi all. what is the best way to duplicate recipe with initial status?! Example: initial status of recipe 1-In progress then change it to 2 - Approved Now is there some generic function to duplicate it or create new version with same values but with initial
WPF element
Hi Could anyone advice where can download more WPF elements for using in Zenon? Please advise if where can get the resources. if possible please share the WPF bar type Thank you.
Manage Smart Object Templates for different projects
Hi, I have the same smart object that I use in three projects. The projects are subordinate to an integration project. I use a global project for central management. I can create a smart object template in this global project, but I can't instantiate
Replace Faceplate container screen using function
Hi! I have setup a Faceplate screen with 10 superimposed containers, thats because I manage their visibility with a variable (if var = 1 show container 1, if var = 2 show container 2) due to the proyect increasing its size I want avoid using so much containers,
Issue with 'Start continuous tone' function
Hello everyone, I need to enable an alarm sound in a zenon project; however, it can´t play the wav file properly after the execution of “Start continuous tone” function. I expected it can play the selected wav file, but I only hear the Windows default
How to replace Variable from Write/Set Function Dynamically?
Hi! As the title sais I want to know if there is a way to use the same function in diferent buttons to write on diferent varaibles. This is because I have a control array of 50 elements and I want to avoid using 50 functions that only changes the destination
importing multiple XML files for embedded variables
For normal Variables I have a powershell code that combines all the variables I want to import into a single xml and it works great but when I try to do the same for embedded variables, it only imports the first variable(with its embedded variables) and
Using webview2 in zenon10
I just upgraded my Zenon 10 to version 348998 to be able to use Webview2. The instructions to use it refer to zenon6.ini where there should be a section [browser] this is however missing in the ini file. Appart from this setting is there anay other action
Z8.20 Combielement Zustandstext Kombination aus freiem Text und Variableninfo
Ich habe gerade versucht bei einem Combielement bei den Zustandstexten eine Kombination aus den Variableninformationen, genauer gesagt einen Teil der Kennung, und einem freien Text zu erstellen. Leider habe ich hier keinen richtigen erfolg. Ist das Möglich
Linking rule - target
Hello everyone, I have a question about dynamic linking rule in screens. This is linking rule for symbol: but i only received variables values for inv_01 (in range inv_01 - inv_20) I have variable that contains current inv in view (e.x. inv_17) how can
Create WPF Interface
Hi everyone ! Do you have a problem with adding wpf element to your screen ? I use .NET 6.0 for below case. I use manual from: https://download.copadata.com/fileadmin/user_upload/Downloads/Dokumentation/760SP0/ENGLISH/Manual/zenon_WPF-Element.pdf I created
Custom File Path and Extra Folders
Greetings, I have a question about custom file paths and how file storage works in general. Specifically, I'm wondering why two extra folders were created, even though I didn't specify them. I set the data storage path for a subproject (Read-back and
Historian - Get Lot Name question
Hi! I need help understanding the diference between this two options in the historian section: Get lot name from the variable at start Get lot name from the variable at end I kwnow that is related to when do the variable is written, but when I try to
Vertical Scroll On Screen
Hi! I got a form system on a screen and I want it to be all on the same screen always visible, but I run out of vertical space on the screen. There is any way to make the screen vertically "Scrollable"? -Thanks
Date & Time Input
Hi! I need users to fill an Input field with a Date and/or Time. There is a way to click an Input field and open a calendar to select a date o a way to make easy for users to enter the Date? Thanks!
Link Zenon Variable to a user control WPF-Element
I have recreated the example in paragraph 5.3.1 of the Zenon manual: two user controls, the first with code behind and the second a wrapper control for the first consisting of an xaml declaration. In the first control, a public property is declared in
Connecting to simulated Modbus Slave
I'm trying to hook up a project in Zenon to a modbus slave, configured as follows: Assuming my IP address is a.b.c.d, how should I be configuring the modbus RTU driver to pull out those first 3 values? (They're all signed ints). Also, what's the easiest
Service 'zenDBSrv.exe' on server 'localhost' is not running!
when i try to create new project what to do now can anyone explain me step by step
How to Verify License End of Validity
Dear COPADATA Team, I need to verify the customer, the license end of validity, but in license manager end of validity is not mentioned nor in the Serial No. file I got from the COPADATA. Where can I find this info?
Alarmstatuszeile filtern
Hallo, ich habe eine Frage zur Alarmstatuszeile. Gibt es eine Möglichkeit, die Alarmstatuszeile nach bestimmten Alarmgruppen zu filtern oder werden dort generell alle Alarme angezeigt? Danke! Christian
ALC Tickbox not available in my feeder symbol?
As per the screenshot, for some reason i cannot select the the "color from ALC" tick box when configuring my feeder symbol? using Zenon 11 It seems to be related to the line elements used in the symbol. any help would be appreciated.
Extended trend export displayed data - change what is exported
Hello, When using the screen type specific action "export displayed data" from extended trend i want to export variable identification and the default selected . Where to i change what is exported? i want the default column selection and one more.
Creating and Using Templates in Scada
Hello, I create pages in Scada depending on the equipment used in the field. However, this situation becomes more complicated when there is a lot of equipment in the field whose data will be received. In order to solve this situation, I want to create
How to run the open the RDP session on clicking button from HMI?
Hello Team, I have to open the RDP session from the HMI when I click the button somewhere on the screen. What is the process and what function to be used for this? Please educate. Thanks, Raja
Annoying project loading loop in SCADA Logic
In Zenon 11, since build 231258, every time a project is compiled in SCADA LOGIC, a progressa bar appears in the Zenon Engineering Studio informing the loading of the entire Zenon project. It is the same progress bar that appears when we open the LOGIC
Released properties of some compnents are not shown if History of Changes is enabled for the project
I noticed that, for some components, the released properties, usually shown as – “$_<Elementname>” – in the properties tree, does not appear if History Of Changes is activated for the project. If we cut and paste the component on the screen, the the released
Released properties of components can't be edited after grouping
Hi! I am using property groups for shared properties in a component from the symbols library, in order to simplify the configuration after placing it on the screen. However, for some reason, after grouping the released properties in property groups, the
Is ALC not working on Symbols? specifically on Circles
I'm trying to make a circle work with the ALC, but for some reason it won't let me activate it; however, I have no problem with the lines... why is this happening just on circles?
Unable to find linked variable: Screens.
I am encountering an issue during the compilation of our SCADA project, where the following error is displayed: "Unable to find linked variable: Screens." It seems that the software is unable to locate or reference the specified variable. I would appreciate
Input Analog Value - via DNP3 to the PLC
Hi, I would like to send an analog value to the PLC. I am using DNP3 driver to talk to the PLC. The tag on the PLC will be an Analog Output tag. Which screen element on Zenon should I use to send the set point to the PLC?
how to customize setting a standard pop up screen which applied for various pop up
Greetings all, I have one doubt about configuration a standard pop up screen which applied for various pop up. I have a standard one full option available and when running engine it show only needed things like this picture how to do that configuration?
Process Gateway (OPCUA) Issue
Greetings all, I have a project (Zenon 12 - latest build) that utilize an OPCUA process gateway, sometimes the configuration resets it self and retrieve an old configuration. Sometimes new tags added are not shown when I use Matrikon or any other OPC
Prevent variables initial values to be shown in AML
Hi! As the tittle says I want to prevent AML to show variables that its initial value are out of the limits. Lets say I have VAR_1, with limits: Min: 5 Max: 10. But the inital value it's 0. This 0 is displayed in the AML and I want to prevent that until
CEL Not showing up in active historian
Hi, I have a report configured to recive data from CEL, but when I try to open the report configured to show only the last active report (img) the CEL is empty. I also have the same equipment modeling linked to the dataset and the historian. What am I
Asign data from historian to a variable
Hi, as the tittle says I'm tring to figure out if it's posible to read data from a lot that has already been saved to historian and asign it to a variable. For example: I got 3 lots, lot1, lot2 and lot3; with this structure: lot_name, lot_type, lot_description.
Zenon 10 build 103999 installation problem
Need help! I want to install zenon10 but I am facing the problem shown in the following figure: I opened the LOG file and found many errors as [1628:3E3C][2023-03-16T12:26:06]w363: Could not create system restore point, error: 0x80070422. Continuing...
Next Page