Erweiterter Trend
Hallo, ich habe das Problem, dass im Erweiterten Trend, prozessabhängig, viele Kurven (10) gleichzeitig angezeigt werden müssen, die dann auch noch eng nebeneinander liegen. Mit den Farben können die Kurven nicht wirklich auseinander gehalten werden.
Picture Element with more colors?
Hi, I'm using some graphical elements like line, circle, polygon, and I want to color them differently according to the different variables; so what I mean is, something like this: Variable.run =1 -> polygon should be green Variable.error=1 -> polygon
Sending current values via e-mail
Hello, is it possible in Zenon ( and how to do it), to automate the following actions: -reading measurement variable every hour -sending variable value via e-mail every hour Thanks. Regards This is a migrated post! Originally posted on 06.02.2014 by user
ActiveX Variablenzuordnung
Hallo, eine Frage zur Variablenzuordnung bei ActiveX. In der Hilfe steht dazu "–ffnet, wenn Variablenzuordnung möglich ist, den zenon Dialog zur Variablenauswahl." Aber wie weiß ich denn, wann es möglich sein könnte/sollte? Denn eigentlich sollte es schon
Password revorer
Dear colleagues, please advise if there is any way to recover the users passwords in global project recovered from WBS? The story is that I have the set of the users in the Global project. I am doing users audit and found a few of them were used very
Header should be shown always
Hello, just one more question, I created a project with demo pictures (also including the NAVIGATION pic), but I want do display a "HEADER" pic too. I know, when I make a start funktion with the Start-Pic, I could display the header always, but why is
Zenon V7 Message: "invalid user" is shown
Hello, I created some users (username + PW) to try the user administration. But the Problem is, when I want to log in with one of them (no matter which), or also with the login without dialog, there's always the message "invalid user" and, when I tried
Open Log file in runtime
Dear colleagues, please advise how to open text file from the network path in runtime? I am concern of using scteen type either HTML or Notepad. The path is provided via the set of variables sPath = \server\share\folder\ sName = filename.ext sNewExt =
ActiveX wird nicht angezeigt
Hallo, mein Problem ist Folgendes, ich würde gerne mein selbstgeschriebenes ActiveX Control nun in mein Zenon-Projekt einbinden, nun habe ich etwas in der Hilfe herum gesucht: http://www.copadata.com/fileadmin/user_upload/Downloads/Dokumentation/651SP0/GERMAN/Handbuch
Meldung "Kommentar erforderlich"
Hallo, ich möchte für Meldungen die Möglichkeit "Kommentar erforderlich" verwenden, die sich in V7.10 aktivieren lässt. Wie muss die Alarmmeldeliste aufgerufen werden, und welche zusätzlichen Elemente sind zur Eingabe des Kommentares dann nötig? Nach
System variables - HW resources - SB question
Hello support team. I try to add System variables from HW Resources group and meet strange thing. No matter if I choose, for example, Free memory[KB] or Free memory[KB] - SB, in variables property on the System driver variable tab I see Type = Free memory[KB]
Report Generator doesn't work in RT
Hello everybody, I have a problem with the Report Generator and I donÂ't know how to solve it. Maybe anybody has any idea... In my project I have an archive where different process data are saved. The archive is started with a trigger and the save cycle
Login Problem AD User
Hallo, seit kurzem ist es den AD Userern nicht mehr möglich sich in der Runtime an zu melden. (Fehler: "Ungültiger Benutzername") Die Konstellation ist wie folgt: Angemeldet wird über den Webclient auf einem TerminalServer. Die Runtime ist aufgebaut mit
Rezeptgruppenmanager
Hallo ich habe zwei Fragen zum Rezeptgruppenmanager: 1. die seitenspezifische Funktion "Alle Werte absetzten" soll über eine Sicherheitsabfrage wie "wollen sie wirklich laden? etc." laufen. 2. Wie kann man das Speichern von Werten in die Rezeptur steuern?
Umzug Zenon Runtime und Archive auf anderen Server
Hallo, kann mir jemand sagen wie die Vorgehensweise ist, wenn ich meine Zenon Runtime von einem virtuellen Server auf einen anderen Umziehe? Ich gebe den neuen Pfad im Editor an, übertrage die Daten beende die alte Runtime und starte die neue auf dem
Keyboard screen for RGM
Hello everybody, I know that in the RGM is possible to define an individual Keyboard for each recipe value. In my case, I have an integer variable "Type of material". To this variable I have linked a reaction matrix, because I need in RT the text for
Zenon runtime slow response
Dear All, I am facing the following problem in Zenon 7.0. The Run time is sending a document to printer like Cell1, Cell2.... etc to printer (Ref: Snap-01) for every event is doing in Zenon run time. For Example, I noticed in the printer window, there
Woldview Initial setting:Zoom Max -Vollbild
Hallo, wie kann ich beim öffnen der Worldview Darstellung das gezoomte Bild auf KEIN Zoom also Vollbild default einstellen. Danke für Hilfe. Jozef This is a migrated post! Originally posted on 17.01.2014 by user jusufs. Please be aware that information
Print Function
Dear All, I am using a "Print" Screen type specific function for printing trend. I deleted this "Print" function in another screens like Alarm Message List and Chronological Event List for testing purpose. But the problem is Zenon runtime is sending the
IMM: Einlesen der Daten fehlgeschlagen
Hallo, 7.1, Windows Server 2012 IMM nach Anleitung (Datenbank angelegt, Vorbereitungen) eigentlich erfolgreich angelegt. Entsprechendes Bild angelegt. Nach Start der Runtime und öffnen des Bildes kommt die Fehlermeldung: "Einlesen der Daten fehlgeschlagen"
Using parameters and variables in Report Viewer
Hello I have some question about using Microsoft Visual Studio Report Builder. 1. I added variable in Report Properties. After it my report stopped to show any data. I deleted this variable but report didn’t start to work correctly. Is it possible to
Updating Values from Scada to Excel
Hello Everybody, I am trying to get updated values from Zenon Scada to Excel sheet. I am getting the updated value in excel sheet from scada in same machine where both zenon and Excel installed. But i would like to get updated values from scada to Excel
Signal Spectrum Plot
Hello, Is it possible to present signal harmonics in Zenon in a nice way (via a plugin, c# library)? This is a migrated post! Originally posted on 07.01.2014 by user pwlodar. Please be aware that information can be outdated.
Alarm Status Line
hallo und frohes neues zusammen, meine frage bezieht sich auf die Alarm Status line. ich möchte gerne das quittiren der Alarm Satus line erst ab einen bestimmten benutzerebene erlauben und finde diese einstellung im editor und der doku nicht. Bis jetzt
System locked message, how to unlock
Hallo, Zitat: Bei Eingabe eines nicht existierenden Benutzernamens oder bei leerem Passwortfeld wird die Fehlermeldung "Ungültiger Benutzername" ausgegeben. Nach drei Fehleingaben wird das System für alle Elemente die eine höhere Berechtigungsebene als
Freezing screen in runtime
Dear, I made upgrade project from V6.22 to V7.00. Project is upgraded normally without errors. In Runtime when I pushing buttons that switch screens faster (clicking on buttons every seconds) after few switching the screen is freeze and not possible any
Number of Alarms.
Hi Zenon team I have one question to ask you. I have a one header (Fig 1) in my project please see the attached snap shot. I have created alarms area like R02,R04,R05 and assigned these area to variables. I am getting alarms if any one variables of these
Report
Dear All, When i open report in zenon server it will open immediately but when open reports in zenon Web client it will take take too much time to open the report.Is there any solution to open the reports in Web client quickly? This is a migrated post!
Equipment Model in RT nicht verfügbar
Guten Tag, wir möchten das Equipment Modell als zusätzliches Filterkriterium für eine Bildumschaltfunktion nutzen. Es wird auf ein CEL-Bild geschaltet. Wir haben einen Workspace mit zwei Projekten, Global- und Start-Projekt. Wir haben bereits ein EQM
Hide Report Viewer Toolbar
How can we configure or hide the report viewer toolbar? (see attached Toolbar.JPG) Usually this configuration can be set with the url calling the report. http://technet.microsoft.com/en-us/library/1c3e680a-83ea-4979-8e79-fa2337ae12a3 Thank you This is
Eingabe negativer Werte am Eingabekeyboard
Hallo Zusammen, ich habe ein numerisches Eingabekeyboard, aber kann dort nur positive Werte eingeben. Gibt es eine Tastenfunktion die die Sollwerteingabe negiert.? Danke für die Hilfe Gruß Armin This is a migrated post! Originally posted on 13.12.2013
XML Import - Variables
Hi, I am having trouble importing variables through XML. When select the XML file, zenOn just hanging( stuck) there and without doing anything. So I have to manually shutdown the ZenOn and it never import variables. To find the problem, I created sample
Einfärbung Alarmzustandsanzeige in AML
Hallo Leute Kann man die Alarmzustandsanzeige (das Kreissymbol) die einzelnen Farben ändern? Editor Version 7.10 SP0 Build 7770 64Bit Danke Lg This is a migrated post! Originally posted on 11.12.2013 by user garfield.79. Please be aware that information
ActiveX CD_DotNetControlContainer
Hallo zusammen, ich möchte ein ActiveX-Element über CD_DotNetControlContainer einfügen kann diesen jedoch nicht auswählen ( wenn ich ein ActiveX - Element einfüge ) bei mir Fehlen alle Elemente mit CD_xx in der Auswahl. Muss ich die separat installieren
Zeitverstellung
Hallo zusammen, ich habe folgendes Problem bei meinem Rechner Server2008R mit ZenOn 6.51 stellt sich meine Rechneruhr ( + 1 Stunde ) um sobald ich die Runtime Starte Bitte um einen Hinweis an was das liegen könnte, Danke! Auch wenn die RT läuft und ich
how to show cleared value in alarm, etc.
I have some questions. I tried to find the answers in forum but I couldn't. 1. How can I show the cleared value in AML? I think alarm occurs when the value meet the limit. Then it would be cleared by checking the condition. I want to get the cleared value.
Restore Project Backup
Hello Support, I have project backup done in Zenon 7.0 and i am trying to restore it in zenon 6.51 but its giving me error, is it possible to restore project from new version to the older one? Thanks in advance This is a migrated post! Originally posted
Trending display with variable identification
How to display trending with variable identification in curve name by default? This is a migrated post! Originally posted on 08.12.2013 by user yitlilee. Please be aware that information can be outdated.
Var Beschreibung im Numblock
Hallo zusammen, folgendes: Ich möchte wenn ich auf eine Zenon Zahlenwert klicke der Sollwert über einen Numblock eingegeben werden kann. Des Weiteren soll dann der Variablenname der jeweiligen Variablen in einem Feld im Numblock dargestellt werden. Das
Kommentarspalte - Funktionen
Hallo, ich hätte einen Vorschlag für Funktionen im Editor. „hnlich als die Spalten Name, Typ, Parameter etc. wäre wegen Beschreibungsmöglichkeit eine neue Kommentarspalte sehr nützlich - wie bei der Symbolbibliothek. Dadurch kann man 'beschreibungslosen'
Next Page