Process Gateway: OPC to another protocol
We are need in gateway OPC XML-DA 1.0 (mater side=client) to protocol (slave side=server): or ModbusRTU or IEC60870-5-101 or IEC60870-5-104 or IEC61850. Please, confirm that Process Gateway can convert OPC XML-DA 1.0 to above protocols. Thanks in advance.
Process gateway with DNP and time stamp
Hello Support, In one f our projects we have integration with one system using process gateway with DNP 3, integrated system is reading data from our zenon process gateway, but the problem that there is no time stamping for data is showing in there system,
Modbus Process Gateway
Hey, With two servers (HP Server used for data acquisition) and zenon running in Software Redundancy mode with three Runtime clients only, I want to configure Modbus process gateway for data transmission to DCS over Modbus over TCP/IP protocal on redundant
Process Gateway with Mobdub RTU
Hello support, For one of our projects, we have integration with DCS system using modbus rtu process gateway, they are reading measurements ( voltage, current, frequency...etc ) and statuses ( open, close..etc), to configure there system they are asking
Modbus Process Gateway
Hello Everyone, Good Day! We are using redundant Servers(Server-1 and Server-2) as Data Acquisition Servers in one of our projects. We have to send the acquired data on these servers to DCS over Modbus. In this regard, we additionally included Modbus
Widows users with Process Gateway
Hello support, I have process gateway installed in one computer which has tow windows users " administrator" user and "operator" user, the operator user dos not have administrator rules, and the problem that process gateway can not be run under operator
Procees gatewy license
Dear support, For the process gateway license, if we order zenon server, it comes with the server license or we need to order it separately? Thank u in advance. This is a migrated post! Originally posted on 09.04.2015 by user yara. Please be aware that
Process Gateway error
Dear Support Team When I turn on Process Gateway there is an error. You can see picture. Can you help me to give the reason for this? Maybe this is the reason I can not connect ASE2000 to Process Gateway??? Thanks This is a migrated post! Originally posted
Redundant Proccess Gateway
Dear support, I have 2 process gateways running in to different servers using DNP protocol, I want to make it redundant (one gateway running at the same time, if field second should run). Kindly please guide how to do that. Thanks in advance and best
Process gateway Modbus
Hi, How does the modbus slave driver behaves if there is redundant process gateway. Ex. substation level devices are in 61850 and convert them to modbus to send to DCS. For DCS communication, modbus slave is plan use but wanted to check for redundant
Process Gateway DNP
Hi support, I have same zenon 7.0 project ruining in 2 different servers, i configured the process gateway with DNP points in one server, is there any way to copy same process gateway configuration instead to do it again in the second server... Thank
Process Gateway and IEC870slave
Hi there! My first question is where is zenProcGateway.ini ? I opened the Process Gateway and chose IEC870slave as the module. Due to some problems, I decided to change it. However it's set on the previous configuration and I cannot find the zenProcGateway.ini
Class poll for DNP3.0 process gateway
Hi, I need to define classes for DNP3.0 process gateway. So that the master station polls the data accordingly. I cannot find any procedure or manual to do so, can anyone help me with this matter. I am trying to send signals (digital and analog) to master
Redundant Process Gateway
Hi, I want to run two DNP3.0 Process gateways in redundant, so that If one fails other can response. But they both should not respond at the same time. I will be running the gateways on seperate machines, having Windows 7 as OS. The gateways will be responding
Modbus Process Gateway
Dear All, I am trying to use the "Modbus" Process Gateway in Zenon 7.11 for data communication. There is no data transferring through gateway. How can we know the Process gateway is transferring data or not? Please note the following, 1. I exported the
Process Gateway Disappears
Hi Support, We are using Zenon 6.51 SP0 on Windows 7 (32-Bit). While using Zenon Process Gateway, when we add the variables (1 or more than 1) in order to export data over DNP3.0 Protocol, by pressing OK, the Zenon Process Gateway Disappears completely
Process gateway - Backup
Hi, I wanted to know if there is a different procedure to take backup of the the configuration of process gateway? or does the configuration gets stored while taking the project backup? i am using zenon 7. I had configured a few tags in process gateway(
Process gateway(Modbus)
Hi, in process gateway of zenon(7.0), i have noticed that there is only option for setting holding register offset. But i want to configure for read input register in process gateway(function 02h). How do i make this possible? This is a migrated post!
Process Data Gateway
Good Morning, i have tested the Zenon Process Data Gateway with success for a 870-104 communication. The problem that i am having is in initializing this process, so that its starts automatically with system startup. If i put it in the startup folder,
Zenon Process Gateway on Clients
Hi Support, Just want to confirm if I can use Zenon Process Gateway and OPC Server on a Machine running Zenon Client Runtime? Or is it necessary that I need to have a connection with Server Runtime? Thanks. This is a migrated post! Originally posted on
Zenon Process Gateway performance issues
Hi Support, I am dealing with a Zenon Energy Edition Project having 1000 61850 Variables. The Runtime is running fine but, on exporting them via DNP3.0 using Zenon Process Gateway, the Gateway hangs up after few seconds and I have to end its Process.
Process Gateway module in demo license
Hello, I want to evaluate the Process Gateway module (IEC60870 slave). My development station has not its license currently and is there any way to access it in demo license? This is a migrated post! Originally posted on 03.03.2011 by user michael_k.
Process Gateway
Dumb question, Is the ZenonProcessGateway tool bi-directional. We are using it to export data from zenOn tags, can it be used as a poratol to import data from another systems tags?? This is a migrated post! Originally posted on 03.02.2011 by user murphys.
Multiple Master in DNP3 process gateway
Dear Support, In our on-going zenon EE SCADA project our Client wants us to revise the design. One SCADA server will export data in DNP3 TCP protocol to two Master which are Zenon EE too. We tried to simulate pc-A will Zenon EE 6.22 and DNP3 process gateway
Process gateway-DNP3
Hi, I have zenon, configured as DNP3 process gateway . In order that DNP3 client will be able to import data, i need to run the zenProcGateway.exe and export data aside from the runtime. Attached is the window that will appear for process gateway. When
DNP- Process Gateway
Hello! I made simulation using dnp process gateway. I have noticed that the data that is being shown in the DNP client is only the whole number value here is the scenario: SERVER-A IS RUNNING WITH ZENON DNP PROCESS GATEWAY AND SHOWING THE VALUE FOR KILOWATT
Zenon process gateway.
I have been having some problems with this interface. It has been set up and worked fine for a while. Recently, the Update /Seconds figures on the configuration form have been question marks (??). The rest of the comms outside zenOn system are working
Zenon process gateway.
I have been having some problems with this interface. It has been set up and worked fine for a while. Recently, the Update /Seconds figures on the configuration form have been question marks (??). The rest of the comms outside zenOn system are working
Process Gateway
Im working right now with Zenon process gateway, as per my understanding in your documentation. Whenever you run the zenProcGateway.exe during RT, it will show you what protocol interface you want to select ( like DNP. Modbus, SNMP, etc.) and after you
Process Gateway IEC870SL
Hy! Ich verwende das Process-Gateway mit dem Modul IEC870SL. Protocol 870-104. Zum test habe ich eine interne-Variable "VAR1" angelegt. Nach dem Start des Gateways meldet der Master eine Verbindung. Soweit ich weiß sollte nun bei „nderung des Wertes der