Web Pages
I would like to embed IE or similar onto a Picture, pass in the address I would like the user to view. Is this possible without lanching IE. Cheers Graham:D This is a migrated post! Originally posted on 15.08.2008 by user allmendinger. Please be aware
Archive scanning cycle ignored
When an archive is started using a function the Archive Scanning Cycle is ignored. Is this intended behaviour? This is a migrated post! Originally posted on 14.08.2008 by user nsko. Please be aware that information can be outdated.
Settings for the aml don't take any effect
I need to make same changes at the layout of the AML, but when i set the settings in the editor and then copy it to the runtime, it doesn't take any effect. In the project.ini it is set, but the runtime always show the standart layout. greetings matthias
Offset for a nummber field
I got a problem with the nummber fields. It have to show the year in 2 nummbers. So far it works without problems, but if i type in for example 08 it shows just 8 and i didn't find any settings to set the offset so, that zeros in front will be shown.
Printing Reports
Hi all! I'm trying to print reports but i'm having a small problem. The company logo that i putted in a cell is not printed. I'm trying it with a "create PDF" printer, first i thought that it might be a margin problem, but i filled some cells above the
Circular Alarms/Events
How do I stop the flashdisk from running out of space with alarm/event logs? I just want a circular alarm and event display of approx 50 items. I do not need to keep these archived. How do I achieve this? Thanks, Tim This is a migrated post! Originally
InitInstance bad format error message when starting editor or runtime
An error message "InitInstance(): an unnamed file has a bad format." appears when starting the runtime or the editor This could be an indication for a hardware defect on the harddrive. Please check if e.g. the file zenon6.ini or zendb.ini can be opened
How to check if an alarm is acknowledged or not?
For some of my elements I need the following logic (digital inputs): If the alarm is abnormal and unacknowledged then the element should be flashing red If the alarm is normal and unacknowledged then element should be flashing green If the alarm is abnormal
Import Variables
I am unable to import variables from RSLogix 5000. I am using zenOn eidtor 6.22 which just allows me to import S7 variables and .XML files. This is a migrated post! Originally posted on 04.08.2008 by user dak2483. Please be aware that information can
CEL and AML goes blank
Hi mark, My CEL goes blank so quickly(30mins). I've run a test on my desktop. I also created a new CEL and AML to see the different with the old one.(collegues got problem CEL, after creating the new CEL it's happen to b ok). 6signals have been simulate
CEL and AML goes blank
Hi mark, My CEL goes blank so quickly(30mins). I've run a test on my desktop. I also created a new CEL and AML to see the different with the old one.(collegues got problem CEL, after creating the new CEL it's happen to b ok). 6signals have been simulate
CEL entries
Hello, I have a question about the CEL List. In the Variable property "Set value" i change the the parameter "Logging in CEL" to "Nothing". But in RT when i change the variable value, everytime i get an entry in the CEL- Listelement. So what is wrong
error on restoring a project backup
When restoring a project backup, I get the following error in the editor: "restore project backup failed". When I open the diagnosis viewer, I can see the following entry: DBSRV:Error ExecuteNonQuery Error:The command contained one or more errors.RESTORE
determine if the recipe has finished (correctly)
How can I determine if the recipe has completely been written to the PLC? And how do I know if this has been successfull? The system driver offers several status variables for this purpose. For example, depending on the outcome of executing (writing)
Show more than 2841 Alarms on the ALARM picture
Hello, I have many error messages. I want to show all messages from the last year. zenon 5.50 SP7 shows me only 2841 Alarms, but there are much more messages. the filter is set on 5000 entrys. What can I do? This is a migrated post! Originally posted
zenkeyblock & Ctrl-Alt-Del
Hello, It seems that the keyblock program does not block the Ctrl-Alt-Del key-combination, rite? Is there a way to do this? thanks and best regards tauhien This is a migrated post! Originally posted on 27.06.2008 by user tauhien. Please be aware that
PCE on WinCE 5
Hi, I cannot get PCE to run under windows CE. It runs perfectly on the PC but not on the Windows CE Device (VIPA TouchPanel). I've set the Zenon.ini VBA and PCE = 1. Is there anything else I should do? Thanks, Tim This is a migrated post! Originally posted
the standard user "SYSTEM"
Hi all, It is possible to change the standard name of the default user "SYSTEM" in zenOn (6.22 SP0) ? Is there any solution ? I'll try with the function "Language change" but don't work.. :( Best regards, Roberto This is a migrated post! Originally posted
Zenon project protection from uploading
Just want to find the best way to keep my Zenon project secure. At the moment the source files are all on a PC and downloaded to the remote project on CE hardware. If the CE hardware is given to a client when the project is handed over, can the client
Variable subsitute
Hi Support, My first post i hope it's correct! Using a function to call a picture with new values. Some value work, orthers do not a total of 12 values are to be replaced This is a migrated post! Originally posted on 09.06.2008 by user dchandler. Please
Alarm groups
Hello. I try to get get a text buttom to change color depending on a alarm group or alarm area. Now we are using "funktion" under "alarm configuration" to change displayd picture when a alarm occur. I have tryed to choose a "internal variables" (bool)
Zenon6.ini Windows sbs
Hi. I have installed zenon6.22 on my pc and Windows SBS std 2003 R2. I need configure zenon for two monitors but i can't find the file "zenon6.ini". Someone can tell me where he is? Thank you This is a migrated post! Originally posted on 04.06.2008 by
Button Visibility
Hi, I'm trying to make a button invisible once it's been pressed and have created a boolean variable to link to the button. If my understanding is correct, if the variable is switched ON the button should disappear and the opposite if it's OFF. I have
Multiple monitors on Vista
Are there any special Vista specific settings for making zenOn runtime run correctly on a 2 monitor system? I've tried with a zenOn 6.22 project that is running on a 2-monitor Windows XP SP2 system without problems, but no luck in Vista so far. The settings
How to have cumulative alarms time in report
I need to do a report where weekly or montly display, for some alarm, count and total time (active property). With count no problem About time, I extract the singol "active" data from alarm, but I didn't find the way to sum this data. The problem, I think,
Screen resolution
My screens were built with a resolution of 1024 X 768 and my target PC has a resolution 800 X 600. I use some JPG and BMP screen background and the images are shifted and not scaled on my target PC. Is there a way to automatically scale the screen for
VBscript under window CE
My VBscript works on my PC but it does'nt work in my PC under window EC. The application is checked for " Windows CE Project" in the general tab and the VBscript Start Type of the task is " System Start". ??? This is a migrated post! Originally posted
remote transport
I want to download an application into a windows CE 5.0 Panel. I already download the Runtime by using the option "Update window CE runtime" of the Zenon editor. I have place this program into "programfiles\Zenon" folder. I tried to use the remote transport
Standard Recipe and string variables
Hi all! i would like to use string variables within the Recipes (don't know if it is possible with Standard Recipe...), for example: Product code: XPTO (Recipe Name, ok) Product code_number: 123 Product Description: bla bla bla (String Variable) Product
after a project backup is restored, not all items are available anymore
When I restore a project backup previously created on the same PC or on another PC, not all items are included. Some variables / pictures are missing. How can this be? If a server backup is created of a multi-user project, the items which are currently
Reaction Matrix
After I have created a Reaction Matrix, I'm able to select it on variable setting but I don't see it on the Reaction Matrix editor. It does the same for all other project in this computer but on my virtual computer, I can see all the reaction matrix that
Export And Import of XML
Hi, Is there a recommended xml editor, I have lots of Tags to create and would like to do it in something like Excel. This is a migrated post! Originally posted on 23.04.2008 by user allmendinger. Please be aware that information can be outdated.
system variable "last open picture"
When I'm using the system variable "last open picture" to see, which picture has been opened last, this works fine for one project, after I have set the "main templates" in the project configuration. When I start a multi-hierarchical project however,
Show Runtime in two monitors
Hello! My question is as follows: ItÂ's possible in "runtime" see two diferents pictures in two monitors? I want to see one picture at first monitor and the other at the second monitor (e.g in the editor i create one project with two pictures "pic1" and
Windows CE 6,0 and GIF file
Using Zenon6,22sp0 on WindowsCE 6 , when runtime start the GIF file don't appear correctly: the transparency property isn't correctly handled. This is a migrated post! Originally posted on 04.04.2008 by user d_montini. Please be aware that information
formula ediator
This should be an easy one but cant find it. i want to display formula ediator but i couldn't how do i display it thanks This is a migrated post! Originally posted on 03.04.2008 by user gh_ounie. Please be aware that information can be outdated.
Reloading the runtime (accept changes from the editor without runtime restart)
Thank you for the help Mark. You said that is possible "create a variable in the editor, and reload the runtime. This way the changes are accepted without closing the runtime." How i can do this? Could you tell me please :o Thank You. This is a migrated
displaying @ symbol in text box
This should be an easy one but cant find it. I want to display an email address but the @ is removed (as indicated dynamic element for language. How do I display a email address in a tect box? Thanks Matt This is a migrated post! Originally posted on
RunTime & Schedule
Hi people: My question is about Runtime and Schedule. ItÂ's possible create one variable in runtime and write this variable in schedule? I want define one variable that contain one hour and write this variable in the schedule, this hour must be defined
"variable image remanent" setting is not saved
When I activate the option "variable image remanent" for example in the IEC60870-5 101/104 driver in zenOn 6.22, this option is not saved! When I enter the driver configuration again, the option is suddenly not activated anymore. What do I do wrong? When
Next Page