Normal status (NORM)
hello i have set variable "normal status" active on and normal value ON but Normal status (NORM) bit always is "0". Where is the problem?:( This is a migrated post! Originally posted on 30.09.2009 by user westbaaam. Please be aware that information can
ZenOn RT starting before TwinCAT on CE
Has anyone come accross a situation where ZenON RT process is starting for TwinCAT on a CX1020 CE5.0. On Boot up ZenON is VERY slow, if we close the RT and open it again then it runs fine..... Thanks dcg This is a migrated post! Originally posted on 29.09.2009
Scale
ist es möglich, die Skalierung einer Variablen z.B. mittels einer booleschen Variablen umzuschalten um z.B. die Ein- Ausgabe eines Werters zwischen mm und Inch umschaltbar machen. Also mm Eingabe: Wert in der Steuerung 1000 - Eingabewert 1000 Inch Eingabe:
Ungültiges Argument bei Funktion Rezept Manager
Hallo Ich will ein Rezept (Zenon 6.22SP0), welches im Rezeptgruppen Manager erstellt worden ist beim Runtime Start direkt laden. Dazu verwende ich die Funktion Rezept Manager. Sobald ich nun das Rezept anwähle und OK klicke erscheint ein Message Fenster
Interlockings (Verriegelung)
Hello, I have 1 picture that i call on more times with the Function "picture switch" and a filter for variables. Now i have the following problem: In the picture i use a Interlocking (Verriegelung) for a Button. But the variable for that Interlocking
Mehrere Rezepte gleichzeitig Laden/Speichern
Habe die Herausforderung das ich mehrere Rezeptegruppen gleichzeitig laden und auch speichen muß. Es gibt ca 16 verschiedene Rezepte, diese wurden im RGM in entsprechenden Gruppen angelegt. Gibt es eine Zenon Interne Funktion die es ermöglicht aus den
Same Project On Two Machines
Hi, I want to deploy the same project on two PC's. There is and keyswitch at one PC which will determine which PC can use a certain page (The page is for starting and stopping the system). The projects communicate to the same PLC and are networked together
Benutzerverwaltung in Runtime
Hallo Ich möchte in der Runtime ein Benutzerverwaltungs - Bild erstellen, welches das hinzufügen, ändern und löschen von Benutzern, inklusive Rechte- und Passwortvergabe erlaubt. Gemäss Help und einigen Beiträgen sollte dies mit Zenon 6.22 nicht nur im
Picture switch - Replace indices
Hello, I have a Picture that i want to use with different tags. When i create a new function "Picture switch" , there is a filter for variables. For example: KFSUA04 must be KFSUA02 AND LS452 must be LS264. (Variable KFSUA02.......LS264 exist!) How can
CEL & Alarm files on CE
On a CE (6.22 SP0) target project, with activated AML and CEL, I created a standard "Alarms : Save AML and CEL memory buffer" function activated by hand (assofar). However... :eek: no files are created on the target's directory ('SDMMC Card[I]HMI[/I][I]Panel_Name[/I][I]Project_name[/I]\').:(
Universal Regler mit Touchbedienung
Hallo! Ich möchte den Universal Regler in einem Projekt auf einem CE-Panel verwenden. œber den Universal Regler soll ein Sollwert per Touch verschoben werden können. Der Zeiger im Universal Regler mit dem der Sollwert verschoben werden kann ist leider
Projektsicherung von 6.22 SP1 in 6.22 SP0 einlesen
Hallo zusammen! Ich habe ein kleines Problem... Wie kann ich eine Projektsicherung aus 6.22 SP1 in 622.SP0 zurück lesen. Ich weiß es geht NORMALERWEISE nicht, der Editor verweigert den Import in 6.22 SP0 aber es gibt doch bestimmt einen Trick in der Schublade
Authorizations
I've created a user "oper" and set the authorization level/group to 22. I've set the authorization level to certain elements to 22. After logging in as oper and clicking on a "secure" element, I get the following message: "You are not entitled to execute
Automatic Logout
How do I automatically logout a user after a certain amount of time has passed? This is a migrated post! Originally posted on 26.08.2009 by user scotttee. Please be aware that information can be outdated.
How to set column width for Arhive revizion
Hello, How to set for Arhive revizion column widths in the arhive LISTBOX for the display in Zenon Editor? This is a migrated post! Originally posted on 25.08.2009 by user captain. Please be aware that information can be outdated.
What'™s the reason for freezing the value of dynamic element?
What’s the reason for freezing the value of dynamic element? One problem has been occurred in my project,as when I disconnect the plc connection to PC(disconnect the communication connection) the values of dynamic element is freezed in latest value
How to create a "Time Counter" variable?
Hello, As the title, How to create a "Time Counter" variable? When the event is active, the Time Counter variable runs; and when the event is inactive, the Time Counter is reset to zero. Regards, Peng This is a migrated post! Originally posted on 24.08.2009
Authorization and signature window
Hello all, Is that possible to modify the window arrange, size, font, text and color of the "This action must be signed!" popup window, and also se subsequente "Signature text" popup window? Thanks This is a migrated post! Originally posted on 21.08.2009
Online and Offline printer
Hi Guys, We have a difficulty to set up online and offline printer for ASL and CEL. Everytime we need to configure the BTB.frm, BTB_G.frm, Alar.frm and Alar_G.frm. Do we have any standard configuration for these formats as reference? Thanks for the support!
export SQL base
Hello! We have bought licences with the "Archive Server" module: ZM-ARCH - Archive Server It is specified in documentation (Arhive server.pdf) that: With the module Archive Server process data as well as derived process variables can be logged and stored.
Zuweisungen_projektübergreifend
Guten Morgen, In meinem Server-Client-Projekt möchte ich eine einfache Zuweisung von Variablen machen. Ein Integer (interner Treiber) vom Server soll den Wert an einen Integer vom Client übergeben. Ich trage die Zuweisung im Server ein. Kann auch die
Sprachumschaltung Keywords
Hallo, wie erstelle ich mit dem Editor eine Liste aller "@Keywords", die ich im Report... verwende? Nach der Hilfe sollte das mit (Properties of the project / Runtime-Settings / "display not translated keywords") funktionieren. Danke im Voraus:p This
letzten Werte im Trend
Hallo, ich möchte im ETM die letzen fünf Werte anzeigen lassen. Demnach keinen Zeitfilter sondern die letzen fünf Einträge von der SQL-Datenbank.:confused: This is a migrated post! Originally posted on 19.08.2009 by user stefan.schilcher@gmx.net. Please
Commands interlockings Problem
Hallo, kann ich zwei Command Interlockings mit demselben Bild benutzen ? Dabei ist die Taste1 und 2 im ersten Interlocking zugeodnet und die Taste 3 und 4 im zweitem Interlocking benutzt. Erstes Interlocking ist fur Befehlsgabe mit Ruckmeldeuberwachung
InitInstance(): The parameter is incorrect.
What does this error message means? There are three possible reasons for this error message! A file in the runtime data folder is corrupt! System time is something completely wrong! Hardware failure, e.g. HDD which leads to the same sympthoms like a corrupt
Dynamic limittext as Hex
Hello! I am using folowing limittext to show the value of the variable in my alarmlist. "$Errorcode ;%" Is there a posibility to show this variable value as Hex in the alarmlist? friendly greetings kicker This is a migrated post! Originally posted on
Welcher Kommunikationstreiber
Welchen Kommunikationstreiber muss ich für die Verbindung eines VIPA Windows CE 5.0 Touchpanel und einer Siemens CPU 315-2DP wählen, wenn ich die Verbindung über Profibus DP oder MPI machen möchte? Danke und Gruß Nico Nordendorf This is a migrated post!
Trend Graph
Hello, I've a problem when printing trend graph. The curves are displayed in the trend graph and it's look fine. When I do printing using default trend's control element, besides the curve others are print out(i.e curve name, scales, time axis). I also
CEL 'Stop' button
Hi guys, I observed that the text spelling 'stop' button in the CEL shows in RT aren't the same with what displayed in Editor. (in Editor) It displays all in caps lock,'STOP' while in RT it displayed 'Stop'. Could it be bug? :confused: I am using zenOn
Reaction matrix ?
Hello We have a link text element under all pumps, fans, compressors. I want to show 3-5 diffrent text message in this link text window,For exampel, OFF, AUTO ON, MANUAL ON, PAUSE, ALARM. Depending on 3-5 diffrent variable (bit). Today we are using a
Extended trend module question
Hello! I would like to have buttoms for different time filter in the ETM picture, as 1hour, 1day ,1week, 1month. Is it possible :confused: Today i use a picture switch to open new ETM picture with different time filter, but i have to re choose which variable
Configuration of Alarm in Zenon Editor
Hi, I have a small problem with the configuration of one of the alarms coming from one of the machines linked to our data collection system. The alarm is called "Machine in Standby" (internal variable: S0.M85.4), because we have 5programs that we run
Dynamischer Zugriff auf Textarray
Hallo Ich möchte Text aus einem Array dynamisch darstellen: aAlarmTxt[0..20] -> aAlarmTxt[0]:= "Text 0" aAlarmTxt[1]:= "Text 1" usw. Anschliessend soll der Text auf einer Seite mit aAlarmTxt[Idx] dargestellt werden können. Wobei Idx eine Variable ist
ext. program start in CE5.0 system
How I start with zenon 5.50SP6 a external program where is placed in my CE5.0 Image System. This is a migrated post! Originally posted on 30.07.2009 by user rgnos. Please be aware that information can be outdated.
SQL Database and Zenon Editor
Hi, I m trying to create a report which will give me efficiency of the machines. For this reason I have created a new picture but I am confused on how to extract the information of (Alarm Duration, running time of the machine) from the Database. I was
SQL Database and Zenon Editor
Hi, I m trying to create a report which will give me efficiency of the machines. For this reason I have created a new picture but I am confused on how to extract the information of (Alarm Duration, running time of the machine) from the Database. I was
Alarm variables
Is there a way to get a list of variables that are configured As Alarm or As CEL? This is a migrated post! Originally posted on 22.07.2009 by user scotttee. Please be aware that information can be outdated.
Bild zurück
Hallo, gibt es eine (System) Variable, in der der aktuelle Wert für Bild zurück gespeichert ist? Durch Auswertung dieses Wertes könnte man, wenn dieser z.B. >3 ist de Funktion "Bild zurück" in "Bildumschaltung xxxx" ändern um ein x-faches Drücken des
y-scaling trendelement
Is it possible to change the default 0..100% scaling of the y-axis at the trendelement to a user scale e.g. 0..20m? This is a migrated post! Originally posted on 22.07.2009 by user affoltep. Please be aware that information can be outdated.
Creating runtime files
Is there a way to make zenOn stop asking "Do you want to create runtime files?" when exiting the application? This is a migrated post! Originally posted on 17.07.2009 by user scotttee. Please be aware that information can be outdated.
Next Page