Filter screen text not visable
I have an issue with the filter screen in my project: As you can see the text has dissapeard from the screen. Same workspace but different project i have: So over here it displays without a problem. What could be the cause of this? Is this a syle/color
Berechtungsebene VBA zenon 11
Hallo zusammen, wie ermittle ich die Berechtungsebene eines Benutzers via VBA? Mit: UserEbene = thisProject.Passwords.ItemUser(thisProject.Passwords.LoggedUser).level funktioniert es nicht mehr (unter 7.10 schon). Danke! Gruß Martin
Listbox scrolling issue
I have a faceplate in Zenon editor and inside this screen, I have listbox. While the problem is when i am scrolling the screen Listbox also scroll. For further detail please review the attachment picture. How can I adjust the minimal size of the Listbox
Latched Variable (RS flip-flop similarity)
Hi, Is it possible to define limit value to be latched once received and become reset when the related Alarm has been acknowledged without getting into script or function?
Connect in ReportViewer zenon database + sql
Hi dear support, I have tried use in rdl report two datasource. Zenon xml and it works, but exist any way to add additionally second datasource - sql server? because when i add datasource connect with sql server the report in Runtime reportviewer does
SQL Express and SQL Standard Evaluation upon installation
hi all, I am noticed that if i installed the zenon engineering studio, it package with the sql express version. I also noticed that if i installed only service engine and reporting, it also package with sql standard evaluation. I understand the purpose
Report Viewer - other data sources
Hello! I am trying to create a report - kind of delivery note which contains process data as well as data coming from external sources such as SQL server. In the MS Report Builder I was able to add the datasource and the respective data sets (and also
syslog
Hi, Is The Zenon capable of serving as a syslog server and is it feasible for the Event messages window to receive syslog messages?
Basic Training - tasks and quizzes
I was a little fast with my previous post, which is still awaiting moderation. It's because the lady in the training videos asked me to pause the video and open up the task for the video. However watching the video to the end, she actually goes over the
Creating Report at Service Engine
Hi everyone, I am posting this thread here because my previous thread does not get any reply on the reporting. I would like to ask, is there any possibilities to create a report at the service engine. For example, my situation is i want to generate a
User Authorization
Respected all, I'm dealing with a situation that contains 3 projects in the same workspace. I want to use the 'User Authorization configuration' that applies to all 3 projects at the same time, and in the same way. I know how to configure user administration
Finger Print Login In Zenon
I need Finger Print Login System User can Login with Finger Print Access or Biometric Access It is Possible?
QR Code Generate in RDL/Archive data
Is it possible to generate QR code in RDL file/Archive data for batch report with some data?
Everywhere app
Hi guys, I tried to establish a connection between Everywhere app (client) lying on Android and Everywhere server but failed. I got a message "java.net.ssl.SSLHandshakeException:java.security.cert.CertPathValidatiorException: Trust anchor for certification
Timestamp of coming and reactive alarm in AML
Dear Wolfgang i use zenon logic to group alarms in one general alarm using IOR Function bloc to copy the last timestamp from the input to the output. In zenon logic there is no problem every time one of the input alarms changes the timestamp of the output
T5 runtime error in Raspberry pi
Hi, I try to work with my raspberry pi 3 board with an application in straton . I follow the guide but I have a problem in the t5 runtime when I write the instruction "sudo ./ t5pi_energy.1102.20718". and here is the error message 'sudo: unable to execute
Export Historian data in SQL
Hello Please give me some advise about how to export historial to sql. I have choose in Historial, I have created historian archive and choose SQL databaase.i have choose evacuation after storage time : SQL database with provider Microsoft OLE DB provider
copy the timestamp from a variable to another in zenon logic
Dear support in zenon logic we want to copy the the timestamp from IEC61850 variable( created in zenon studio) to another variable created in zenon logic and show them in the alarm message list in zenon runtime. we use Vsigettime and Vsisettime fontion
Logging of recipe values in CEL
Whenever I change a value through the recipe manager, the changed value and corresponding variable are not recorded in the CEL. The chronological event list and history log only show that the recipe was modified but not the values or variable that was
AML/CEL font size
Hi, how can I change the fontsize of text in AML or CEL? I can only change the font size for Alarm status line in project properties. Do I have to manipulate the zenon6.ini?
button to apply changes
Hi all, I have specific button that will confirm the changes for after the operator fill in the value. What function that i need to use to achive this. i noted on the command group pop-up.. i am not planning to use this pop kind of method to achieve this.
Faceplate-like display
Dear Sirs, I am using zenon v7.0 SP0. I am trying to find a way to show faceplate like picture (for an object – pump for example). The faceplate looks like a small screen with tabs on the top. The tabs are named like: Status, Configuration, Parameters,
Faceplate
Hi Is zenon have any place that i can configure faceplate like wincc faceplate? thanks
Back and Forward Screen
Hi all, I found there is a way we can use "return to last function". Is there any function for forward button?
Traffic congestion via GIS
Hi all, Is there any possibilities for me to configure traffic congestion via GIS as shown in the figure below. If there, what is the module needed.
User Management Screen
Hi all, I cannot find any field that i can use to configure my user management header as per alarm message list screen. I want to standardize the table header for whole my GUI. Is it possible for me to configure this table header.
Login Logout
Hi all, I want to create a single login and logout button. How can i achieve this? Is it possible i use reaction matrix, if can which condition i should create. Thanks
Alignment on alarm list
Hi all, referring to the image below, where can i find the configuration to tune the alignment for the alarm panel. i want to make all the wording and header align accordingly.
Unhandled Exception Occured!
Hi, I use Zenon 7.60 as my utilites Scada in our power plant. Scada editor has given me an error and can not open it. In July it happened again and yesterday me and our local supplier reinstalled Copa Data and installed a patch which is given by Copa
worldview control panel
Hi all, I want to ask how do i set the view of this control panel. Currently, it "zoom out" my original layout. I want it to have an original view of my layout.
Operator Logbook
Does zenon have operator logbook module instead of using windows notepad? I cant find any information related to operator logbook in zenon help.
[Zenone 7.10] Zenone32 / Error: 100 / zenon6.ini
Hello. Last year, we resolved a mysterious problem occured at the first launch of the application Zenon 7.10. http://www.copadata.com/forums/showthread.php?t=2395 But this time, it doesn't work. In the "zenon6.ini" file, I have only "GERMAN" for language.
Screen Open Function
Hi, I am doing GUI stress test by clicking same navigation button (assigned with screen open function) multiple time. I found that the screen freeze. Is there any way to overcome this issue. Current hardware is the recommended hardware propose in zenon
Activate Standby Server
Hi all, Is there any function or module in zenon that i can use to do switchover between active server and standby server for maintenance purpose
Disable double right click acknowledge
Hi, It doesn't take long for me to require some help again. :) Is it possible to disable double right click to acknowledge alarms on alarm status line and alarm message list? Thanks, Peter This is a migrated post! Originally posted on 08.05.2013 by user
Navigation Pane
Hi all, Is there any suggestion for me to design a navigation pane (similar to web navigation pane) in zenon.
Did someone know the technologies used by Zenon scada ?
Hello i try to find which technologies are used by Zenon ( like java, or .net, or simples exe ) ? thanks in advance for your help regards
Dynamic change selected Printers
Hi ! Is possible to dynamic change selected Printer? (for example using VBA or any else way) in Runtime i need it because i have 2 type of report and both should be print on 2 different printer. Thanks for advance
Recipe change logging
Is it possible to log recipe changes in Runtime with date and time, the recipe changed, which parameter was changed and who changed it? I've heard that the CEL could be used for this but don't have the details. How would one use the CEL for this? This
connected clients diagnostic
Hello, I have a multi-hierarchical project where the main project is the server and the children projects are the clients. I want to monitor the connection status of the clients. I tried to use the variables of the SYSDRV "Names of connected clients"
Next Page