PingState Speed
Hi, I notice that the pingstate (SNMP driver) is very slow. eg it took around 5 seconds to complete getting ping status of 4 devices. Anyway to speed up the ping speed ? This is a migrated post! Originally posted on 27.04.2011 by user whitetaru. Please
Variable setting
Hi, Lets say i have Variables, A,B,C,D and E. All are binary type. How do i set A=1, when B=C=D=E=1? How do i set A=0, when B=C=D=E=0? Warmest Regards Whitetaru This is a migrated post! Originally posted on 26.04.2011 by user whitetaru. Please be aware
Structure varible using OPC Client V2-0
I have created a structured data type. I am using the Kepware server in demo mode. Downloaded today current version. Zenon will allow me to use this driver for a new tag of structured type. My question is what do I put in for the offset? The PLC memory
Basic SNMP help
Hi Copadata, I am new to Zenon 6.5. I am trying to learn to configure SNMP get and set in the GUI. Is there any document OR videos to learn how to set up a basic SNMP Get/Set in Zenon Software ? and I understand Zenon only accept SNMP Trap v1. I tried
Nested structured Data types
Hello, I have create a Structure date type in Zenon 6.51. It type name is ckt it has two elements current int and kwh real. I then created a structure data type called panel it has one element called ckt1 of type ckt. What would like to do is create a
Reading Modbus variable that contains multiple words
hi, I need to read the Fault recorder value from Areva P122 device with Modbus RTU protocol by zenon. This device has 5 fault recorders and modbus address to upload them are as below: 3700h Fault 1 3701h Fault 2 …… 3704h Fault 5 each of them contains
muss SQL-Anbindung schreiben können?
Hallo, ist es für eine SQL-Anbindung zwingend erforderlich, dass zenon Schreibrechte auf dem SQL-Server bekommt? --> Wenn ich nichts weiter tun will, als den Zustand von ein paar Werten abzufragen, ohne diese von zenon aus beeinflussen zu wollen, müsste
Real Variable Modbus TCP
Hallo zusammen, folgende Problemstellung: ZenOn 6.21 Wagocontroller 750 849 Treiber Modbus TCP Registerzugriff über FC16 funktioniert alles. Lediglich der Wertebereich ist auf -1000.00000 bis 1000.00000 begrenzt. Wie können größere Werte kommuniziert
MODRTU32 Werte schreiben
Hallo zusammen, ich versuche Werte in ein Gerät mit dem Treiber MODRTU32 zu schreiben. Die Komunication wird durch TCP ausgeführt und das Gerät ist für Modbus TCP geeignet. Das Lesen funktioniert einwandfrei durch den Treiber-Objekttyp "Analog Input",
BuR-Treiber kann nicht geladen werden?
Hallo, obwohl ich eine complete-Version von zenon 6.50 habe, kommt beim Versuch, einen Treiber vom Typ BURPVI.EXE anzulegen (BuR-PVI basierender Treiber) die Fehlermeldung: "BURPVI.EXE: Modul konnte nicht geladen werden! (The last error: 0x00000000) Woran
Communication problem with DNP3 device
Hi, I have some problems in communication with a RS485 serial dnp3 device. Some times disconnection happens in communication between zenon and device for few seconds. These interruptions are not periodic and usually their duration times are close together.
Timer for control
Hello, I am using DNP 3.0 protocol to comunicate with RTU to control breaker close and trip and my question is if i can use timer so for example after 10 mints from the last operation i can send command automaticly to teh RTU. Is it possible with zenon?
Signal blocking facility
Hi, Some protection relays support a facility to block message in monitor direction and also in command direction. It will be useful in test conditions of substation because operator could prevent from sending signal to server and SCADA from protection
Omron_FINS
In drivers list thats on VipWin 6.01 there is driver Omron_FINS for serial communication. Where can I find that specific driver Omron_FINS for Ethernet communication.Is it included in some version of VipWin or can I implement that driver in 6.01. I need
Fehlerwartezeit
Servus Leute, hab mal eine Frage. Was versteht man unter Fehlerwartezeit? Wie verhält sie sich im Zenon. Hab in der Zenonhilfe leider nichts gefunden. Meine Version: 6.21 SP1 Danke im vorraus MfG NAT_SS This is a migrated post! Originally posted on 07.12.2010
Command Control
Hello, I am communicatting with GE RTU serially and trying to control throw DNP3 Master, the RTU cofigared with close\trip control code, and when i am sendding Pulse control code from zenon its not working, when i changed the configuration of the RTU
64bit data type in modbus
In my case, IEDs should time synchronized by zenon. The IED type is P123 from AREVA and its protocol is Modbus RTU. Zenon dose not support data type of time register in P123 because it consists from 4 word (64bit). Please find its data sheet as attachment.
OPC Client driver in synchronous mode
Hi Sirs, any ideas how to configure OPC Client driver to use Synchronous I/O mode? The server I'm using (3S Codesys OPC Server 2.3.9.2) supports synchronous I/O only and other OPC clients are working well with the server, however I can't find how to setup
OPC Client driver in synchronous mode
Hi Sirs, any ideas how to configure OPC Client driver to use Synchronous I/O mode? The server I'm using (3S Codesys OPC Server 2.3.9.2) supports synchronous I/O only and other OPC clients are working well with the server, however I can't find how to setup
BECKHNG Variable Connections Problem
Hello All, I really new in Zenon. I tried communicate between CX1020 (Win XP with TwinCat 2.11) with CP6607 (Win CE 5.0 with ZenOn 6.20 SP4). I ran project on my laptop in demo mode and all links work w/o problem then I sent project to the panel all links
Priority of operators for Math driver?
Hi, Just a little question : do you have a list of the priority of operators (order of operations) for Math driver in zenOn? (or just from left to right if without brackets?) This is a migrated post! Originally posted on 30.09.2010 by user lephis. Please
dnp process gateway- Multiple DNP Master
I have one computer with zenon process gateway and I need to connect 2 computer at the same time as DNP master. Will it be possible for zenon with this kind of setup? Does Zenon DNP Process gateway supports multiple master? If yes whats the maximum number
Importing variables from drivers failes
Hi all, in zenon Editor I try to import variables from Beckhoff NG driver but it failes with a Messagebox with following Text: VBA Error - zenOn.ApplicationED Object not found! I do not expect a problem with libraries from Beckhoff because TwinCAT System
BUR20032 driver
Does anyone have experience with communication between B&R plc and zenOn 6.22 SP1? This is a migrated post! Originally posted on 10.08.2010 by user sbc. Please be aware that information can be outdated.
Betriebsstunden und Schaltspielzähler
Hallo, irgendwie habe ich entweder den Sinn oder die Funktion von den Betriebsstunden und Schaltspielzähler nicht verstanden. Ich hab leider keinen Zugriff auf die Steuerung daher muss ich die Zähler selbst realisieren. Ich habe heute Variable die als
Zenon OPC through VPN
Hi, I am planning to let Zenon act as an OPC server in a network. Then try to access it with a remote OPC client through internet using VPN. I want to make sure that Zenon doesn't have any in built security issues regarding VPN access. Will Zenon show
Dynamische Grenzwerttexte
Hallo Ich verwende eine Variable "sMessage" als dyn. Grenzwerttext und eine Alarmvariabeln xAlarm1, xAlarm2 Auf Seite SPS wird nun "sMessage" mit einer Meldung gefüllt und anschliessend eine der Alarmvariabeln xAlarm1 oder xAlarm2 gesetzt. Nun kommt es
Zenon OPC Server Versions and Compliances?
Hello! need infos for Zenon 6.22 OPC Server a.what is the OPC server version for Zenon 6.22? b.what are the compliance Zenon 6.22 OPC Server with OPC Foundation? Thanks! This is a migrated post! Originally posted on 11.02.2010 by user hoscillada. Please
Handling Asynchronous Data - Report Generator
I am new to Zenon, and using the 6.22 tutorials to try and understand the 6.50 system. All the examples for ARCHIVING, FOLLOWING ARCHIVES, and the REPORT GENERATOR seem to assume regular sampled data. I have asynchronous data from a machine, with 1 to
Probleme mit Togglebit Alarm (S7-Status LED)
Guten Tag! Ich überprüfe mit Zenon das Status-LED Bit einer S7 SPS um festzustellen ob bzw. wenn sich diese im Stopp Modus befindet. Die Variable gibt im Limit 1 einen Alarm aus wenn der Wert mehr als 10 Sekunden auf 0 steht und im Limit 2 wenn der Wert
Start/Stop Arvhive on PLC Trigger
Hello I've got an Archive, which basically logs some temperature and pressure data. I want to start archiving the data based on a PLC flag. i.e If the Flag is TRUE then start archiving, and if flag is FALSE, stop archiving. This should all be done without
SBO activation
Hi How can I active SBO for a command variable in DNP3 protocol (Binary Output type variable)? Can I active SBO without using Command processing? Currently I can send command to device correctly but without SBO. Thanks This is a migrated post! Originally
How can I read this two type of Data register?
Hi I have one IED that it has two types of data register. one is integer and one is float(IEEE). I've attached the table of IED register in this threat that you can see it. Does zenOn support this type of data in MODBUS Protocol? and i can't find it in
Driver user commando
What is "Driver specific user commands can be executed"? It is some command which save current variable values ant status configuration?:confused: This is a migrated post! Originally posted on 24.11.2009 by user westbaaam. Please be aware that information
reload driver
Hello how to set settings that after start, stop IEC 101-104 driver procedure SCADA remember last used values and status bits (AVALUE.....) This is a migrated post! Originally posted on 23.11.2009 by user westbaaam. Please be aware that information can
Renaming Variable name for OPC Connection
hello! Is it possible to rename the tags of existing variable name for OPC-DCS 3rd party connection ? for example : the existing IEC 61850 variable name is 30PO-SS-050!SEL_751A_1MET/METMMXU1/A.phsC/cVal.mag.f[MX] and I will rename or customize it for
Relay modelling
Respected all, Is it possible in Zenon 6.22 SP1 to model SEL or Siemens Protection Relays? Modeling of the relays should be such that I can use the CID (Relay configuration files) files in the software model of the Relays in order to work with the variables
TCP/IP Comm problem
Having problem communicating with S7-400 Siemens PLC. I have created three projects in the past, so this is not new to me. I can ping the processor and connect using STEP7. I've tried deleting and re-creating the driver and the variables. I'm still getting
Reading "M" bits in Siemens
Is Driver Object Type "PLC Marker" to be used to read "M" bits in Siemens processors? This is a migrated post! Originally posted on 23.09.2009 by user scotttee. Please be aware that information can be outdated.
Modbus read input status
We are trying to read 8 discrete inputs from a modbus device. Input are connected to 8 BOOL zenon variables, using INPUT STATUS driver type and BOOL data type. We have noticed that if we define an array of 16 BOOL associated to the first 16 input register
Next Page