7.60
DATEI32: driver only reads a single file per update cycle, potentially resulting in a backlog that cannot be cleared
Description The File Driver only reads a single file per update cycle, which can lead to a backlog that can no longer be cleared. It is expected that up to 100 files are read per read cycle, the oldest files first. This behavior has been adjusted. ...
DATEI32: driver does not send all value / status changes for one variable to the runtime
Description The File Driver does not send all changes of values and status from the server to the client in the Service Engine. This error has been fixed. All expected data is sent again. To benefit from this fix: Update your zenon Software Platform ...
Importing Batch Control recipes with illegal name is possible
Summary In Batch Control recipe's names may not include some special characters. However, wen importing recipes from XML files, there is no check to prevent the use of these characters. Description In Batch Control recipe's names may not include some ...
SAP maintenance reports don´t work
Summary In the module SAP interface it is possible to define maintenance reports. They actually use the SAP function blocks ALM_PM_MAINTNOT_CREATE ALM_PM_MAINTNOT_SAVE ALM_PM_MAINTNOT_MODIFY_DATA These are, however, not remote enabled with a ...
The variable selection dialog in the runtime incorrectly selects a linked variable for a recipe variable in the Recipegroup Manager screen
Summary When selecting a linked variable for a recipe variable of the Recipegroup manager in the runtime that has the action type "link with PV", that already has a variable linked, a variable selection dialog is opened that allows selecting multiple ...
Cancelling changing the action type of a recipe variable in a Recipegroup Manager recipe in the editor does not refresh the recipe under specific circumstances.
Summary When the action type for a recipe variable in a recipe of the Recipegroup Manager is changed to "link with variable" without linking a variable, the change is not accepted on clicking OK. When cancelling the change and reopening the recipe, ...
After deleting all Recipegroups in the Recipegroup Manager screen in the runtime, the last selected recipe is still partially displayed in the recipe value table and the recipe selection combobox
Summary When all Recipegroups are deleted in the runtime in the Recipegroup Manager screen, the recipename may still be displayed in the combobox for selecting the recipes and parts of the last selected selected recipe are still displayed in the ...
The system driver variable "wrong value for set value" is not always set in the runtime when entering an invalid value for a recipe variable of the Recipegroup Manager in the Recipegroup Manager screen
Summary When entering an invalid value for a recipe variable in the Recipegroup Manager screen in the runtime using the current recipe value table, the system driver variable "wrong value for set value" is not set. When the value is changed in the ...
Toolbar for the Recipegroup Manager detail view in the editor incorrectly enables buttons for XML import
Summary The toolbar for the Recipegroup Manager detail view in the editor does not correctly disable buttons for XML import based on the node selected in the tree with recipegroups and recipes in the detail view. The context menu correctly considers ...
The timeout property in the editor for a Recipegroup Manager recipe is not disabled in the editor when the "write synchronously" property is not set
Summary When the "write synchronously" property is not set for a recipe of the Recipegroup Manager in the editor, the property "timeout" can still be set. DescriptionWhen the "write synchronously" property is not set for a recipe of the Recipegroup ...
The zenon OPC UA server incorrectly sends an initial PublishResponse with a DataChange notification instead of an EventNotificationList when an OPC UA client subscribes for events
Summary When an OPC UA client subscribes for events in a subscription (CreateMonitoredItems, Attribute 12) the zenon OPC UA server incorrectly sends a PublishResponse with a DataChange notification instead of a EventNotificationList. The incorrectly ...
The OPC UA server sends non-empty keep-alive publish responses with all monitored items under specific circumstances
Summary When a subscription is created by an OPC UA client with publishing disabled and monitored items are added and after that publishing is enabled, the OPC UA server returns all monitored items in publish responses in keep alive messages although ...
Some statistics variables of the DNP3_TG master driver are not updated when objects groups are received from the outstation
Summary The statistics variables "unsolicited response objects received" (offset 907) and "solicited response objects received" (offset 906) of the DNP3_TG DNP3 master driver are not updated when the master receives object groups from the outstation. ...
Recipegroups exported in XML in the editor cannot be imported in the runtime
Summary When an XML file containing Recipegroup Manager recipegroups, which was exported from the editor, is imported in the runtime, the XML import fails and a message "CXMLPort::Process,importing" is recorded in the CEL. Although another message in ...
The editor closes unexpectedly on XML import of Recipegroup Manager recipes under specific circumstances
Summary When for a project the history of changes is active and an XML file is imported that contains a Recipegroup which already exists in the project, the editor closes unexpectedly. DescriptionWhen for a project the history of changes is active ...
The runtime may close unexpectedly when opening a screen.
Summary The runtime may close unexpectedly and produce an unhandled exception when it is executed a screen switch function. DescriptionThe runtime may close unexpectedly and produce an unhandled exception when it is executed a screen switch function. ...
It may occur that a modification in the production & facility scheduler is not promoted to the runtime clients.
Summary It may occur that changes in the production & facility scheduler module are not transferred to the clients after reloading the runtime server. DescriptionIt may occur that changes in the production & facility scheduler module are not ...
On Windows 8 and Windows 10 Multi-Touch issue related to configured button as Momentary switch.
Summary A button was configured as a Momentary switch with default status On. The operator touches the button with one finger and with a second finger touch on a blank location on the same screen. The operator lifted the finger from the button and ...
Under specific circumstances the Momentary switch stays On after pressing in Windows 8.
Summary On a Windows 8 multi-touch environment, if a Momentary switch is pressed and hold with the first finger and there is second touch event bellow, the switch remains On. DescriptionOn a Windows 8 multi-touch environment, if a Momentary switch ...
It may occur that after resizing a screen element the changes are not saved in the editor.
Summary If a screen element is resized using the keyboard arrow keys it may not be saved after pressing the “save all” button in the editor. DescriptionIf a screen element is resized using the keyboard arrow keys it may not be saved after pressing ...
B&R PVI Software provided on the zenon Setup Image cannot be installed on Windows 10
Summary The B&R PVI Software which is included in the zenon ISO Setup cannot be installed on Windows 10. DescriptionThe B&R PVI Software which is included in the zenon ISO Setup cannot be installed on Windows 10. Solution Renewed the B&R ...
3S_V3 driver object type Alarm Event does not support USINT
Summary When choosing the Driver Object Type Alarm Event of the 3S_V3 driver, the data type USINT is not available. DescriptionWhen choosing the Driver Object Type Alarm Event of the 3S_V3 driver, the data type USINT is not available. Solution The ...
The preview section for the columns in the filter dialog for the screen switch function to a standard recipes screen in the editor, does not display any information.
Summary When configuring a screen switch function to a standard recipes screen in the editor, the filter dialog contains a preview section for the columns, however the preview section does not contain any information. DescriptionWhen configuring a ...
The MELSECA driver does not set the WR_SUC Status bit after successfully synchronously writing a Boolean variable in the Runtime.
Summary The MELSECA driver does not correctly set the WR_SUC Status bit for Boolean variables after successfully writing the variable synchronously in the runtime. For all other variable types, WR_SUC is set correctly when a synchronous write is ...
Under specific circumstances it is not executed the correct function linked to a WPF element in the runtime.
Summary The substitution of a function linked to a screen WPF element with the replace links feature of the screen switch function may not be effective in the editor so that in the runtime it is executed the source and not the target function. ...
Under specific circumstances the project analysis window in the editor does not list a variable used in the project.
Summary The variable use and project analysis window may not display string variables linked to combo-/listbox elements when they are used for creating entries dynamically. DescriptionThe variable use and project analysis window may not display ...
The Report Generator auto expand function in a lines do not propagate correctly, if there are more than one expand line in one row available.
Summary Report Generator With using different auto-expand lines cells function in a rows, values are shifted and empty cells are shown. DescriptionReport Generator With using different auto-expand lines cells function in a rows, values are shifted ...
The PIN and NA codes should be limited to four numerical digits.
Summary The PIN-code and NA-code should be limited to 0-9 and four digits. DescriptionThe PIN-code and NA-code should be limited to 0-9 and four digits. Solution The PIN and NA codes are now limited to 4 numerical digits. Issue Number: 35195 Fixed on ...
It should not be possible to change the address properties for internal variables in the editor.
Summary It should not be possible to set the address properties "Net address", "Data block" and "Offset" at internal variables with the datatype LINT and ULINT in the editor. DescriptionIt should not be possible to set the address properties "Net ...
It may happen that it is not possible to draw a straight line for the pipe element by holding the SHIFT key in the Editor.
Summary It may happen that it is not possible to draw a straight line for the pipe element by holding the SHIFT key in the Editor. DescriptionIt may happen that it is not possible to draw a straight line for the pipe element by holding the SHIFT key ...
It should not be possible to enter special keyboard characters in the graphics file in frame properties in the editor.
Summary It should not be allowed to write symbol characters at the graphics file in the frame general properties in the editor. DescriptionIt should not be allowed to write symbol characters at the graphics file in the frame general properties in the ...
It may be visible a red vertical line in the project settings dialog in the editor.
Summary It may be shown a vertical red line between the revision and description columns in the remote transport project settings dialog in the editor. DescriptionIt may be shown a vertical red line between the revision and description columns in the ...
The editor should not close and reopen the current workspace loaded if this is selected from the last used workspace list.
Summary The editor should not close and reload the workspace currently opened if a user selects it from the last used workspace list. Instead the editor should recognize that the workspace selected is the same and abort the operation. DescriptionThe ...
The XML export of variables in the 64 Bit editor takes longer compared to the 32 Bit version.
Summary The XML export of variables in the 64 Bit editor takes three times more time compared to the 32 Bit version. DescriptionThe XML export of variables in the 64 Bit editor takes three times more time compared to the 32 Bit version. Solution An ...
It may occur that some information is not displayed when deleting a switching point from a scheduler.
Summary When deleting a switching point in the scheduler, the name of the switching point may not be completely visible in the confirmation dialog. DescriptionWhen deleting a switching point in the scheduler, the name of the switching point may not ...
There is a noticeable constant increase of memory when using the zenon logic FTP function block
Summary When the zenon logic function block "FTP" is used for a longer time, there is a noticeable constant increase of memory. DescriptionWhen the zenon logic function block "FTP" is used for a longer time, there is a noticeable constant increase of ...
It may happen that the project analysis window does not list a function used in the project.
Summary The project analysis window may not display a function usage in the project if this was renamed. DescriptionThe project analysis window may not display a function usage in the project if this was renamed. Solution An issue was resolved so ...
The editor may close unexpectedly when exporting a screen containing a WPF element.
Summary The editor may close unexpectedly when exporting to XML a screen containing a WPF element with WPF-links assigned. DescriptionThe editor may close unexpectedly when exporting to XML a screen containing a WPF element with WPF-links assigned. ...
The screen elements variable information box may be displayed permanently in the runtime.
Summary After right clicking a screen element in the runtime it may be displayed permanently the respective variable information box if the context menu linked to that element was deleted. DescriptionAfter right clicking a screen element in the ...
Under specific circumstances the switch palette function does not change the colors correctly in the runtime.
Summary It may happen that the worldview and the worldview overview screens do not show the same color pallete after executing the switch palette function in the runtime. DescriptionIt may happen that the worldview and the worldview overview screens ...
Next page