7.50
IEC850: selection of multiple array variables online imports only the first array variable
Summary Issue in online import in iec850 (client) driver: selection of multiple array variables will only import the first array variable. Probably since introduction of Symbolic Address. DescriptionIssue in online import in iec850 (client) driver: ...
IEC850: offline import of array variables does not import sub-items.
Summary Issue in offline import in iec850 (client) driver: import of array variables imports only the root of the arrays respectively one variable without elements. Probably since introduction of Symbolic Address. DescriptionIssue in offline import ...
T5BusIec850s: connection loss during command execution (Operate received but not responded yet) locks next commands
Summary Issue in the IEC 61850 Server driver in zenon Logic: if an 850-client disconnects right after requesting Operate and before the IEC 61850 Server sends the response, the state-machine is locked in Control Variable = 199 (or 200). If the ...
IEC61850 Client drivers – zenon and Logic – are processing consistency scans (acquisition of missing Quality) in Logical Device of RCB, not of Data Object.
Summary Issue in iec850 driver in zenon and IEC61850 Client driver in zenon Logic: when a Data Set used in Report Control Block (RCB): - contains single Data Attributes (FCDA with daName) - and the FCDA is placed in different Logical Device as RCB - ...
Under specific circumstances the HTML screen cannot open a webpage in the Runtime.
Summary Self-certificated HTTPS sites are not opened in the HTML screen in the Runtime. DescriptionSelf-certificated HTTPS sites are not opened in the HTML screen in the Runtime. Solution The issue was resolved. Issue Number: 36693 Fixed on Date: ...
It may happen that a user is not locked in the Runtime.
Summary After writing the old password incorrectly three times in the "Edit user" screen the user does not get locked despite it is shown an error message in the Runtime. DescriptionAfter writing the old password incorrectly three times in the "Edit ...
Batch Control PFC recipe editor reacts very slowly
Summary While designing PFC recipes in the Batch Control module, the recipe editor is updated very slowly. E.g. when attempting to draw a connection line, the line will only be drawn one second later. Also scrolling and zooming are affected. This ...
Cruve-Displaylist does not switch headilne or content when switching language
Summary If you open up extended trend and activate cursor, the headline and content-text in the Curve-Displaylist is not changed when you switch language. DescriptionIf you open up extended trend and activate cursor, the headline and content-text in ...
zenon Runtime – multi monitor system, behaves differently dependent of the used operation system.
Summary If using a multi monitor system for example with 2 monitor or a constellation of 2x2 monitors in combination with Windows 8, 8.1 or 10, it could be that the second screen cannot be displayed as expected. The behaviour is not reproducible with ...
zenon Editor – Integration- and Subproject constellation. Project parameters with substitution were not displayed proper.
Summary Substitution: replaced project links were not performed on functions wherever the parameter contains a filter on projects. DescriptionSubstitution: replaced project links were not performed on functions wherever the parameter contains a ...
Rated redundancy does not correctly consider internal variables set to calculation "Network" in the rating matrix
Summary When internal driver variables with calculation "Network" are used in the rated redundancy matrix with the option to validate the value / status, the rating does not consider these values invalid after a redundancy switch. DescriptionWhen ...
zenPG ICCP responds with malformed frame when a remote ICCP-client sends MMS.Read request with flag specificationWithResult=true.
Summary zenon Process Gateway ICCP-TASE.2 responds with malformed frame when a remote ICCP device requests a MMS.Read with flag specificationWithResult=true. This optional flag demands that the response will contain not only values but also names of ...
3S_ARTI_NG Driver : It is not possible to import variables directly from the PLC using the "Online Import" function.
Summary It is not possible to import variables directly from the PLC using the "Online Import" function. The Import fails and generates the error message, "File is not valid". The Driver.exe continues to run after accepting the message. DescriptionIt ...
3S_V3 Driver : The length of WSTRING variables is not considered during variable Import.
Summary The length of a WSTRING variable is available in the Symbol file. During variable Online or Offline Import, the length is not considered and the WSTRING variable acquires the Default length "5" in zenon. The length of STRING variables is set ...
3S_ARTI_NG Driver : It is not possible to write STRING variables in zenon runtime Version 7.50, to a Codesys PLC (V2.3)
Summary It should be possible to write to STRING variables in the zenon runtime Version 7.50 to a Codesys (V2.3) PLC. In the Diagviewer, a "Poke" is sent to the PLC with the value "null". STRING variables which are written by the PLC are however ...
The signature text screen may not be positioned correctly in the Runtime.
Summary The signature text screen position may not follow the position settings in the zenon6.ini configuration file so that it appears in the middle of the screen in the Runtime. DescriptionThe signature text screen position may not follow the ...
3S_V3 Driver : The Driver object type "Alarm variable" does not support the data types DINT and UDINT
Summary The Driver object type "Alarm variable" does not support the data types DINT and UDINT DescriptionThe Driver object type "Alarm variable" does not support the data types DINT and UDINT Solution The 3S_V3 Driver object type "Alarm ...
In the zenon Logic monitoring application, it should not be possible to force Boolean variables using the "Space bar" in the "X5Monitoring Control" ActiveX element if the variable access property is set to "No" during configuration.
Summary In zenon logic, it is possible to build a Monitoring application for programs and variables. During the configuration of such an application, the user can define Access Levels for variables. If a variable has the Access Level "No", changes to ...
It should be possible in zenon to communicate with devices on a Masterbus Network.
Summary It should be possible in zenon to communicate with devices on a Masterbus Network. DescriptionIt should be possible in zenon to communicate with devices on a Masterbus Network. Solution The Masterbus32 Driver has been developed to allow zenon ...
It should be possible in zenon to communicate with devices which are compatible with the NMEA 2000 protocol.
Summary It should be possible in zenon to communicate with devices which are compatible with the NMEA 2000 protocol. DescriptionIt should be possible in zenon to communicate with devices which are compatible with the NMEA 2000 protocol. Solution ...
Activating filter "Automatically select appropriate aggregated archive" for a variable what is deleted, close zenon Editor unexpectedly.
Summary With activating the checkbox "Automatically select appropriate aggregated archive" zenon Editor closes unexpectedly if the variable of a curve has been deleted DescriptionWith activating the checkbox "Automatically select appropriate ...
"Automatically select appropriate aggregated archive" does not work if you de-/activate curves via the Curve list.
Summary If you active curves switch to inactive via the gfxListCtrl, the automatic archive switchover doesn't show new settings of filter. DescriptionIf you active curves switch to inactive via the gfxListCtrl, the automatic archive switchover ...
Printer settings icons doesn't display tooltip, and not support select all fields.
Summary The placeholder icons doesn't display tooltips (Insert Date, Insert Time, Insert Diagram Name, Insert Page Nr.) The input fields (header left/center/right, footer left/center/right, comment, headline) doesn't support select all. ...
T5BusExIec870m: function block IEC60870_SELECT can be blocked after reconnect
Summary zenon Logic (straton) I/O driver IEC60870 Master: Issue by executing SBO commands - if a slave does not confirm Select and connection breaks. When driver has not received activation confirmation for last Select then also after reconnect it is ...
IEC850 is not updating variables with values from reports received before RCB enable is acknowledged
Summary There are some 61850-Servers sending unbuffered reports before the enabling of the related RCB is acknowledged. The part -7-2 obligates only to write-response+ for EntryID (affects buffered reports), not RptEna. Also Tissue 1454 clarifies ...
Sorting the AML or CEL on the columns 'Alarm/Event Group' or 'Alarm/Event Class' may result in undefined behavior
Summary Sorting the AML or CEL on the columns 'Alarm groups' or 'Alarm classes' may result in undefined behavior of the Runtime. DescriptionSorting the AML or CEL on the columns 'Alarm groups' or 'Alarm classes' may result in undefined behavior of ...
Action Buttons which are embedded in a symbol can not be selected as an action button for a command
Summary In actions of a command group you can select which action button of a command screen shall execute this action. When command screen contains a symbol with buttons with screen type specific functions, these buttons cannot be linked in the ...
A user may not be locked after typing a wrong password and the dialog "user is locked" is displayed in the Runtime.
Summary It may happen that a user is not locked after trying to change the password via the “Edit user“ screen with a wrong old password and it is shown the dialog reporting that the user is locked in the Runtime. DescriptionIt may happen that a user ...
Functions may still be executed without a valid signature in the Runtime.
Summary When cancelling a signature the respective function may still executed in the Runtime. DescriptionWhen cancelling a signature the respective function may still executed in the Runtime. Solution The issue has been resolved so that functions ...
3S_V3 Driver: Unexpected behaviour can occur when writing a WString variable value which exceeds the limitation defined in the PLC
Summary Unexpected behaviour can occur when writing a WString variable value which exceeds the limitation defined in the PLC DescriptionUnexpected behaviour can occur when writing a WString variable value which exceeds the limitation defined in the ...
The OPCUA server in the process gateway may close unexpectedly without creating a dump file under specific circumstances
Summary The OPC UA server in the process gateway communicating simultaneously with multiple OPC UA clients, may stop working unexpectedly and show a windows application error under specific timing conditions. DescriptionThe OPC UA server in the ...
The OPC UA server in the process gateway shall implement a maximum limit of the number of subscriptions per session that an OPC UA client is able to create
Summary The OPC UA server in the process gateway does not limit the number of subscriptions per session that an OPC UA client can create. A malfunctioning or malicious OPC UA client may create a high number of subscriptions, exhausting the resources ...
Under specific circumstances the message "You are not entitled to execute this function" is shown twice in the Runtime.
Summary It may happen that a button configured as momentary switch together with holding time and authorization level, the dialog "You are not entitled to execute this function" appears in the Runtime twice when a user without authorization confirms ...
zenon Logic - T5EIPC: ‘Can not find Bus driver DLL’.
Summary ‘T5BusEIP.dll' was not included at the 7.50 build setup. The file wasn’t automatically added to C:\Program Files (x86)\COPA-DATA\zenon 7.50 SP0\ … directory during the installation. Description‘T5BusEIP.dll' was not included at the 7.50 build ...
zenon Video Screen settings are not saved at the related screen switch function.
Summary When the screen switch function was opened, the combo box choice for the entries "AVI" and "BMP" was not saved correctly. For example, when you closing the screen switch function and then open it again, the dialog was not remembering the ...
zenon Editor – variable update issue on numeric value elements.
Summary Once creating and linking a variable to a numeric value element at the zenon Editor. The variable will be placed correctly at the property window, when the element was selected. If choosing a variable at the variable list - ensures to keep ...
XML Export/Import of "exported archives" – zenon Export archives function loses settings
Summary If the Export archives function has a setting to export the archive in dBase, SQL or XML format and these functions are exported as XML, and then imported again, the exported format is set to CSV. DescriptionIf the Export archives function ...
Distributed Engineering – Under specific circumstance it could lead to a variable ID overflow.
Summary When creating a new variable in a multi-user project, it could be under specific circumstances, that the process variable at the table shows negative ID values, i.e. -1519677295. As well it is no more possible to create new variables at the ...
zenon Editor – Import / Export function. Missing properties of afresh XML function.
Summary When adding a filter to a screen switch function, choose a fill color from the color palate or simple any color and export them via function and import them, then the default values for the fill color will be displayed again. ...
zenon Editor and Runtime – Project conversation issue. Report Viewer filter dialogs did not work proper.
Summary When converting a project into zenon version 7.50 the online filter dialog at the zenon Runtime for Report Viewer will not be shown anymore. For example the calendars view to choose a specific day. Once the screen switch function was opened ...
Next page