7.20
The editor should look the WPF assembly file also in the global project.
Summary In the editor, the XAML and DLL files can be placed in the global project, but the WPF screen element only looks in the local project for the assembly. It should be possible to use a screen from a sub project with a WPF element linked to a ...
AML/CEL: sorting in Runtime on alarm areas (name and number) via clicking on the column header does not work
Summary AML/CEL: sorting in Runtime on alarm areas (name and number) via clicking on the column header does not work. Description AML/CEL: sorting in Runtime on alarm areas (name and number) via clicking on the column header does not work. Solution ...
switching command with select and "watchdog timer" = "œnone" counts in background.
Summary The action "switching command" (former "double command") on variable with "Select before Operate" and in group with property "watchdog timer" = "none" counts in background after execute 2nd stage. Then when the device (IED) delays command ...
The CEL filter option 'Always display system messages in list' displays all system messages, even when filtered for a specific lot.
Summary The CEL filter option 'Always display system messages in list' displays all system messages, even when filtered for a specific lot. Description The CEL filter option 'Always display system messages in list' displays all system messages, even ...
after successful command the TIMEOUT bit by response variable stays on
Summary When before the command the RV has already the same value as CO variable, and when RV has TIMEOUT status bit, then after successfully terminated execute - the RV variable keeps the TIMEOUT bit. Description When before the command the RV has ...
zenon Logic IEC61850-90-5 driver: first received values are lost (zero instead).
Summary zenon Logic IEC61850-90-5 driver: first received values are lost. In the Logic Runtime program variables have value 0. Description zenon Logic IEC61850-90-5 driver: first received values are lost. In the Logic Runtime program variables have ...
zenon Logic iec850-90-5 driver: in one cycle the Logic program can have data received by different frames of same sampled values.
Summary zenon logic iec850-90-5 driver: no data integrity per one Logic cycle. Some variables from one data set may contain sampled values from the previous sample frame while other contain current values. Description zenon logic iec850-90-5 driver: ...
iec850 driver by executing the commands delays transfer to RT of COT_actcon(7) until it receives termination.
Summary Since introduction of 'Cancel Operate' feature (in 7.20) the known characteristics of ied850 driver makes difficulties for new feature of Command Processing module. The driver, when ctlModel = 3 or 4, delays the transfer of COT_actcon (7) to ...
default tables for the Industiral Maintenance Manager (IMM) are not created
Summary The names for the database tables used by the IMM are pre-defined and can not be changed in the zenon editor. However, these default names are not stored in the project.ini file. The zenon runtime, however, only created and accessed the ...
It may occur with zenon 7.11 SP0 Build 10238 Operator/Supervisor Edition, that the zenon Editor close with an unhandled exception, if a screen switch function was linked to the screen type: "Extended Trend" .
Summary The following behavior is for cases, if a 32/64 bit version of the operation system and/or a zenon Operator/Supervisor Edition 32/64 bit were installed on the engineering system. When creating a screen switch function and select as screen ...
It is not possible to move the nodes of specific screen elements with the arrow keys.
Summary The nodes of polylines, polygons and pipe elements cannot be moved using the arrow keys. Description The nodes of polylines, polygons and pipe elements cannot be moved using the arrow keys. Solution An issue has been addressed so that the ...
When having a project converted from 7.11 to 7.20 and evacuating archives to SQL database, it is not possible to change values (enter manual values, MAN_VAL) which were created in 7.11 with the archive Revision or report generator, the saving of the value change has no effect.
Summary When changing a value manually with archive Revision which was created after the conversion to 7.20, the value is changed in the archive, in the table of the SQL database and can also be seen in the trend. When doing the same procedure with a ...
After updating to zenon 7.20 I dont see newly SQL evacuated historian data anymore in the trend (ETM), Report Generator, Report Viewer and Archive Revision, only the former evacuated values are displayed.
Summary When having a 7.11 project and evacuating archives to SQL database, then converting project to 7.20 and start the runtime, in the ETM only the data of 7.11 is shown and the .ARX data before evacuation, but NOT the evacuated data of 7.20 ...
Automatic calculation of relative values by the Metering Point Administration does not work.
Summary Even though metering points are correctly configured as automatic metering points with automatic relative value calculation, the calculation won't work. The value of the variable remains unchanged. In the windows task bar it can be seen that ...
CTI driver has high CPU load in combination with slower communication processor/ PLC
Summary The CTI driver has a unusual high CPU load when it communicates to specific (older versions, slower,TI 5x5 Plcs) The CPU load is arround 40-60%. Description The CTI driver has a unusual high CPU load when it communicates to specific (older ...
Under specific circumstances the Metering Point Administration ActiveX Control is not visible in the webclient.
Summary It may occur that the Metering Point Administration ActiveX Control is not installed and registered by the webclient setup so that it is not shown in the webclient. Description It may occur that the Metering Point Administration ActiveX ...
zip files created with the System Information Collector (SIC) can´t be opened
Summary In rare cases it can happen that zip files which have been created with the System Information Collector (SIC) could not be opened again. Instead, the error message "Attempt to access an unnamed file past its end" is displayed. DescriptionIn ...
IEC61850 Client in 'Abort' service does only transport close - TCP.FIN - but should also process ACSE.Abort before.
Summary The IEC61850 Standard defines service 'Abort' mapping to MMS.Abort, but the MMS does not have own Abort, the Abort there is defined by lower protocols. There are MANY documents, in different standards, to be considered for the Abort. It ...
The ValidatePassword event is not fired if a change in the password is just related to case-sensitivity
Summary The ValidatePassword event is not fired if a change in the password is just related to case-sensitivity, e.g. a user changes his password from "Test1234" to "test1234". Description The ValidatePassword event is not fired if a change in the ...
Under specific circumstances when deleting a driver the linked variables are not removed and causing the editor to close unexpectedly.
Summary When reallocating variables to a driver using the XML export and the driver is deleted afterwards, the linked variables are not removed, so that the driver property is empty and the editor produces an unhandled exception. Description When ...
The option "display system message" is not taken into account in reports
Summary The in 7.20 introduced option "display system message" is not taken into account in reports. If you make a report with report generator, and use the cel function, there is no difference if you check or not the option "display system message". ...
inconsistant usability behavior in zenon logic profinet device configuration
Summary zenon logic profinet device configuration: there is an edit box instead of toggle check box when editing the master properties «　Initialize IOxS　» and «　I/O communication only from within cycle　» there is an edit box instead of a ...
SAP Server programs don't work any more after a redundancy switch
Summary When using SAP server programs in a zenon project with redundancy, they can only be correctly executed when no redundancy switch is performed. After a redundancy switch, they will still be executed on the same computer (which is now the ...
occasional unexpected shutdown of the zenon runtime when executing SAP maintenance reports
Summary In rare cases it happens that the zenon runtime closes unexpectedly after sending a maintenance report to a SAP system. This is especially the case if a redundancy switch has been performed ealier. Description In rare cases it happens that ...
when a function is linked to an SAP server program, it is not possible to delete this link any more
Summary When a zenon function is linked at an SAP server function, it is possible to open the function selection dialog for that property and click the "no selection" button. This should normally delete the link from the property so that no function ...
unexpected shutdown of the zenon runtime when a SAP server program with a deleted zenon function linked to it is executed
Summary It is possible to link zenon functions to SAP server functions. If this linked function has been deleted, then the property at the SAP server program will correctly show "function deleted". When the SAP server program is executed in the ...
System Information Collector (SIC) does not store information about corrupt files
Summary The System Information Collector verifies files and displayed when they are corrupt. This information is, however, not saved with the other results of the scran. When you open the saved file, then the information about corrupt files is ...
incorrect information about database status displayed in System Information Coleector (SIC)
Summary The system Information Collector displayed the status of zenon databases on the local computer in SCADA > Versions > Version xxx > SqlConnection > databases. After saving the scan and opening it on another PC, the status of the databases will ...
unsufficient information about COPA-DATA related registry entries collected with SCADA scan option
Summary when selecting the scan option SCADA in the System Information Collector (SIC), not all COPA-DATA related information from the registry is collected. Compared to that, when selecting the FULL option there is more information. Description when ...
Legacy double bit binary input variables of the DNP3_TG driver with an offset > 255 are invalid in the runtime
Summary Legacy double bit binary input variables of the DNP3_TG driver with an offset > 255 are invalid in the runtime. Legacy double bit binary input variables with a lower offset than 255 correctly combine two regular binary input points into a ...
The configured keyboard screen is not displayed in the RGM screen when editing a recipe value under specific circumstances
Summary If a keyboard screen is configured for a variable and the RGM screen is opened for editing with a format file of the report generator and the report generator does not contain the action type, the keyboard screen is not opened when editing ...
The action for the Recipegroup Manager recipe variable may be reset under specific circumstances on saving the recipe
Summary When saving a Recipegroup Manager recipe in the Recipegroup Manager screen in the runtime, with a recipe table that does not display the recipe action column, the Recipegroup Manage rmay reset the configured action for recipe variables to "no ...
The default Namespace Index used by the zenon OPC UA server is not entered in the server Namespace array which may lead to OPC UA clients not being able to browse the OPC UA server address space
Summary OPC UA clients that browse an OPC UA server address space based solely on the entries in the server namsespace array may not display any results following the browse of the server. An example of such an OPC UA client is the OPC UA client in ...
It is not possible to S7 import variables from a TIA project with more than one station for all stations
Summary Only the first found station is displayed and offered for importing symbols. A detail research shows that TIA portal projects does not put an unique CPU number for each station CPU. Instead all station CPUs have the number 1. Description Only ...
Multitouch system gestures are not blocked by zenKeyBlock
Summary when starting zenKeyBlock, the zenon Runtime will start and block all key combinations to access OS features (like Alt+F4). Multitouch gestures, however, are not blocked. Description when starting zenKeyBlock, the zenon Runtime will start and ...
the key combination Ctrl+Alt+Tab is not blocked by zenKeyBlock
Summary Executing zenKeyBlock will start the zenon runtime and block all keyboards shortcuts which are normally used to access OS features (like Alt+F4). However, the key combination Ctrl+Alt+Tab is not blocked in windows 8 operating systems. This ...
Event for the change of the selectino in the Batch Control Master recipe list and Control recipe list
Summary In earlier versions of zenon it was not possible to evaluate the selected master recipes or control recipes via the API. This is, however, important for some applications. Description In earlier versions of zenon it was not possible to ...
zenSysSrv will be stopped immediately after starting when using terminal server registration
Summary When registering zenon for a terminal server, zenSysSrv needs to be started as a service. Unfortunately, it stops immediately after starting, so that zenon can't be started afterwards. Description When registering zenon for a terminal server, ...
Unexpected shutdown of the startup tool when registering a version
Summary In rare cases it happens that the startup tool closes unexpectedly whenstarting the zenon editor of another version than the one which is currently registered. Description In rare cases it happens that the startup tool closes unexpectedly ...
Runtime stops unexpected when a screen switch to ETM is made and configured for an archive curve where the variable has been deleted.
Summary When switch to an ETM screen with filter settings curves from archive and the variable for one curve is not existing anymore in the project it causes the runtime to stop unexpected. Description When switch to an ETM screen with filter ...
Next page