7.10
zenKeyBlock tool only available as 32 bit version
Summary The zenKeyBlock tool, which prohibits keyboard shortcuts to execute OS functions was only available as a 32bit version. Therefore it was not possible to start the 64bit version of the runtime with KeyBlock Description The zenKeyBlock tool, ...
The OPC UA client driver does not mark array elements as INVALID when the connection to the OPC UA server is lost
Summary When the option "request array variables on index basis" is disabled in the driver configuration of the OPC UA client driver, the driver does not mark array elements as INVALID when the connection to the OPC UA server is lost. Description ...
The OPC UA server may respond with a GOOD service result to subscription service requests when the subscription has already timed out.
Summary When an OPC UA client disconnects from the zenon OPC UA server and does not send service requests for a subscription for a specified time, the subscription in the zenon OPC UA server times out and becomes invalid. If an OPC UA client ...
Terminal Server registration does not work when executing the registration via command line
Summary Registering zenon as terminal server via the button in the startup tool will cause zenSysSrv to start as a service. However, when executing C:\Program Files (x86)\Common Files\COPA-DATA\STARTUP>zenon_startup.exe -reg in the command line, ...
The updateCE tool is not able to correctly identify ARM processors
Summary When using the UpdateCE tool to transfer files to Windows CE devices, it can happen that the tool does not correctly identify ARM processors and therefor can't transfer the required files. Description When using the UpdateCE tool to transfer ...
After a restart of the runtime the zenon OPC DA server does not always reconnect to the runtime
Summary Under certain timing conditions the zenon OPC DA server does not reconnect to the zenon runtime after the runtime has been closed and restarted. In such cases it is necessary to restart the zenon OPC DA server. Description Under certain ...
the letter 'u' is written by closing the on-screen-keyboard
Summary In rare cases it may happen that the letter 'u' is written when closing an on-screen-keyboard. This could only be reproduced when starting the runtime with zenKeyblock and when using the Windows keyboard (osk.exe) instead of a zenon keyboard ...
Under specific circumstances the write set value dialog opens in a strange manner in the runtime.
Summary It may happen that when using the automatic keyboard the write set value dialog opens first with half width and it is then shifted to the left underneath the automatic keyboard and expanded to full width. Description It may happen that when ...
wrong default filter setting for file format wne selecting a project.ini file
Summary The startup tool allowes to select a start project for the runtime. For this, you need to browse to the project.ini file of the desired project in the 'RT-path' property. Unfortunately, with default settings the ini file will not show up in ...
A user in AD ADS with the option "user must change password on next logon" cannot login in the runtime
Summary A user created in AD LDS (Active Directory Lightweight Directory Services) cannot login in the zenon runtime when the user has the checkbox "user must change password at next logon" set. A message "wrong password" is displayed when attempting ...
Moving locked variables from global to retain using multi-select does not work in the workbench
Summary Variables that are set "externally visible" in the zenon editor are locked in the zenon logic workbench and cannot be moved from GLOBAL to RETAIN using multi-select in the zenon workbench. Description Variables that are set "externally ...
MELSECA driver: Blockwrite does not work
Summary With enabeled Blockwrite the MELSECA driver fails to write variable values even writing a single variable does not work Description With enabeled Blockwrite the MELSECA driver fails to write variable values even writing a single variable does ...
FTP function blocks do not work correctly in the zenon logic runtime and may cause the zenon logic runtime to close unexpectedly
Summary Several issues exist with FTP functions for the zenon logic runtime where the function may not get executed properly or may cause the runtime to close unexpectedly when incorrect parameters are used. LIST results in an error message when ...
New function blocks for the process industry for the zenon logic runtime are not available in the zenon logic workbench
Summary The new function blocks for the process industry for the zenon logic runtime are available in the zenon logic runtime but cannot be used in the workbench. Description The new function blocks for the process industry for the zenon logic ...
In IEC870_10332 driver the serial communication is not restarted via zenon functions "driver command"
Summary The serial communication in the IEC870_10332 driver cannot be restarted via driver commands. The zenon function to stop the driver is stopping communication with PLC, but then the driver start command does not start communication. Also the ...
The DynProperties AcknowledgeFunctions, NegativeAcknowledgeFunctions and AcknowledgeTimeOutFunctions for a Send a Message function only support appending a string, but not resetting it
Summary It is not possible to reset the DynProperties AcknowledgeFunctions, NegativeAcknowledgeFunctions and AcknowledgeTimeOutFunctions for a Send a Message function. Setting an empty string or a null string (or Nothing) does not reset the property. ...
StratonNG driver increases memory usage using RDA Arcives
Summary Each time that a RDA Buffer is read from zenon, the driver's memory usage grow up an will not be released. Description Each time that a RDA Buffer is read from zenon, the driver's memory usage grow up an will not be released. Solution Problem ...
The remote runtime start of the zenon logic runtime on Windows CE devices does not always correctly consider the path
Summary Under specific circumstances when starting a remote zenon runtime on a CE device that starts a zenon project which contains a zenon logic project, the zenon logic runtime is not initialized with the correct path to the compiled zenon logic ...
Online changes in zenon Logic are lost with a reboot of the operating system
Summary When online change a zenon Logic project and then switch off the device (e.g. WinCE device) where zenon Logic is running, then after the new start of the runtime the changes are lost. Description When online change a zenon Logic project and ...
The zenon logic runtime on Windows CE ARM devices with IEC60870 master may close unexpectedly under specific circumstances
Summary The zenon logic runtime on Windows CE ARM devices with IEC60870 master may close unexpectedly when receiving floating point values in response to a General Interrogation request. (T36) Description The zenon logic runtime on Windows CE ARM ...
vlan ID is not correctly taken over in the ProfiNET IO controller
Summary When specifiying a vlan ID (other than "0") for the ProfiNET controller in the fieldbus configuration of the zenon logic workbench, the ProfiNET IO communication does not work correctly in the zenon logic runtime Description When specifiying ...
zenon Logic FTP function block gives incorrect information if server cannot be reached
Summary when the IPSERVER parameter is not correct the FB gives the feedback that the connection is open. Description when the IPSERVER parameter is not correct the FB gives the feedback that the connection is open. Solution Problem was addressed in ...
The FTP FB doesn't connect to the Windows Server 2008 FTP Server because of a error in the TYPE I comand
Summary The login fails on a Windows Server 2008 FTP Server, the FB sends the comand "TYPE I \r\n" and so the Windows FTP server doesn't accept the parameters. Seem the FTP server has problems with whitespaces in the parameters. If FTP Client sends ...
On Windows CE devices the IEC61850 Server does not parse file transfer directory name with spaces
Summary On Windows CE devices the IEC 61850 Server driver does not parse file transfer directory name with spaces. When a client sends GetServerDirectory service the driver logs "Client requested file directory [with '' on filesystem]." Description ...
FTP FB seem to have a problem with a get when the prior GET failed
Summary If a GET comand has as result 550 (GET failed) the follwoing GET comand seems to be ok but the transfered file has a dimension of 0KB Description If a GET comand has as result 550 (GET failed) the follwoing GET comand seems to be ok but the ...
IEC61850 Server in GOOSE subscriber configuration dialog does not show that a SCL-file of Publisher is not present anymore
Summary When the original SCL-file used once to configure GOOSE subscription (Workbench: driver "Read variables from SCL-file" - tab "GOOSE") is deleted or renamed, this configuration dialog - when reopened - does not show any file name, just empty ...
The zenon logic runtime may close unexpectedly with the ProfiNET master driver
Summary The zenon logic runtime with the ProfiNET zenon logic driver may close unexpectedly when incorrect settings for variables are used. Description The zenon logic runtime with the ProfiNET zenon logic driver may close unexpectedly when incorrect ...
The Profinet Controller driver for zenon logic does not start on Windows Embedded Compact 7 (Windows CE 7)
Summary The zenon logic runtime on Windows Embedded Compact 7 (CE7) fails to start the Profinet Controller driver Description The zenon logic runtime on Windows Embedded Compact 7 (CE7) fails to start the Profinet Controller driver Solution An issue ...
increase of allocated memory when using WPF
Summary zenon allows the use of WPF (Windows Presentation Foundation) objects in screens. However, it may happen in rare cases that the use of WPF elements causes the memory allocated by zenrt32.exe to increase over time. Description zenon allows the ...
The zenkeyblock.exe application is not available for the 64 bit runtime
Summary The zenkeyblock.exe application is not available for the 64 bit runtime Description The zenkeyblock.exe application is not available for the 64 bit runtime Solution The zenkeyblock.exe is now also available for the 64 bit zenon runtime and is ...
IEC62056 driver: BCC error with setting "read single registers" enabled
Summary If the option read single registers is enabled, the communication to specific meters fail. Description If the option read single registers is enabled, the communication to specific meters fail. Solution Problem was addressed in the delaytime ...
Multiple replacement strings for the linking rules for symbols do not work correctly
Summary When configuring a linking rule for symbols using multiple replacement strings separated with ";" the replacement does not always work correctly Description When configuring a linking rule for symbols using multiple replacement strings ...
Multiple replacement strings for the linking rule of symbols do not always result in the correct variables being replaced
Summary Under specific circumstances multiple search strings for the linking rule for symbols do not result in all variables being replaced correctly. Description Under specific circumstances multiple search strings for the linking rule for symbols ...
Variables used in embedded symbols are not always correctly listed in the project analysis
Summary When using variables in embedded symbols these variables are not always correctly listed in the project analysis window. Description When using variables in embedded symbols these variables are not always correctly listed in the project ...
extended trend cursor scanning does not show milliseconds
Summary At the moment the scanner windows does not show the milliseconds, only the axis in the trend is capable of showing the milli seconds. If the ETM Property for the x-Axis is set to show Milli Seconds (Scale - MS) -> also the scan Window should ...
ALC: secure supply coloring may be not correct since 7.10 SP0 build 13311
Summary Automatic Line Coloring: secure supply display is not correct since 7.10 SP0 build 13311 in specific topology. Description Automatic Line Coloring: secure supply display is not correct since 7.10 SP0 build 13311 in specific topology. Solution ...
Hydrometer: Browsing of specific gas meter is not possible
Summary It is not possible to browse the ELS gas meter (supports OMS). The Aerius gas meter can be browsed. Description It is not possible to browse the ELS gas meter (supports OMS). The Aerius gas meter can be browsed. Solution The problem was ...
Client stops when project is reloaded
Summary Client stops when project is reloaded. The changes of the reload are variables created on one RSLinx driver (ALLENBNT) are changed to a second ALLENBNT driver in the project. Description Client stops when project is reloaded. The changes of ...
Too long supply area names in the Load Management are not correctly handled.
Summary When the supply area name of the Load Management (former EMS) is too long, the Runtime may exit unexpectedly. Description When the supply area name of the Load Management (former EMS) is too long, the Runtime may exit unexpectedly. Solution ...
When Runtime creates new AML/CEL entry the input focus for set value via element is lost
Summary The input focus to set value via element is lost when at that time Runtime creates new CEL/AML entry. Issue affects only editing in dynamical screen element; focus on set value dialog or in modal keyboard screen is OK. Description The input ...
Next page