7.10
The Monitoring Viewer ActiveX control should no longer require a license for the PLC Diagnosis module
Summary The zenon logic Monitoring Viewer ActiveX control should no longer require a license for the optional PLC Diagnosis module. Description The zenon logic Monitoring Viewer ActiveX control should no longer require a license for the optional PLC ...
the first VBA macro in a project (thisproject) is not always executed through the execute VBA macro function under specific circumstances
Summary Under specific circumstances in zenon version 7.10, the first VBA macro from the top is not executed through the "execute VBA macro" function. When the VBA IDE is opened in the runtime, the macro is visible and can be executed manually in the ...
The runtime closes with an unhandled exception on execution of certain Batch Control actions under specific circumstances
Summary When the Batch Control recipe contains a "%" character, the runtime may close unexpectedly on execution of certain actions, like duplicate a recipe. The unhandled exception is caused by the "%" character and occurs on generating the text for ...
Not all Alarm Conditions are forwarded from the OPC UA server
Summary Alarm conditions are only forwarded in OPC UA server if they come from a projected limit. When the alarm condition is generated with a reaction matrix it is not considered in the OPC UA server. Description Alarm conditions are only forwarded ...
3S_ARTI_NG driver: the runtime does not react on interaction when the PLC is disconnected or not available
Summary 3S_ARTI_NG driver: the runtime does not react on interaction when the PLC is disconnected or not available. In DiagViewer you can find an entry '100ms timer has not cycled for xxxxx ms' when the PLC is disconnected/set to HW without proper ...
OPCUA32 Client driver: On browsing huge amount of OPCUA Server datapoints (i.e. 145.000) only 42184 are available in the list
Summary On browsing huge amount of OPCUA Server datapoints (i.e. 145.000) only 42184 are available in the list Description On browsing huge amount of OPCUA Server datapoints (i.e. 145.000) only 42184 are available in the list Solution Now the ...
Logix_ODVA Driver gets unhandled exception when reading specific BYTE structure
Summary When having a USINT variable inside a complex structure e.g. Structure.my_usint it can cause under special circumstances a unhandled exception. Description When having a USINT variable inside a complex structure e.g. Structure.my_usint it can ...
MelsecA - Q driver not writing all decimals for float numbers to PLC
Summary Melsec A-Q driver (MELSECA.exe) writes only the integer part of a REAL number. For instance, if it is set 50.1 in zenon, in PLC it is only written 50. On reverse direction (PLC > zenon) the results are ok. Description Melsec A-Q driver ...
3S_V3 driver: emtpy or incorrect symbolic names at variables leads to communication issues
Summary When the symbolic names for variables of the the 3S_V3 driver are emtpy or incorrect (do not exist in the PLC), there are communication issues in the runtime Description When the symbolic names for variables of the the 3S_V3 driver are emtpy ...
Alarm Status column does not correctly display active alarms when the setting "Use Reactivated Time" is used in project under specific circumstances
Summary The Alarm Status is not correctly displayed as "active" under specific circumstances when the option "Use Reactivated Time" is used in the project. If an alarm for a variable becomes acive, than clears (without acknowledging the alarm) and ...
Active Directory users with a "/" character in the user name, cannot be logged in in the runtime.
Summary Active Directory users with a "/" in the name cannot be logged in into the runtime. Description Active Directory users with a "/" in the name cannot be logged in into the runtime. Solution An issue has been addressed in the runtime where a ...
Manual values for historian is no longer inserted into the correct archive
Summary Inserting manual values into an archive of the historian, or changing manually changing a value, creates a new archive instead of changing / inserting the value in the correct archive DescriptionInserting manual values into an archive of the ...
zenon runtime may stop responding under specific circumstances when using .WMF graphics
Summary When using .wmf graphics in combi elements, the runtime may sporadically stop responding on opening a screen that displays such .wmf graphics. DescriptionWhen using .wmf graphics in combi elements, the runtime may sporadically stop responding ...
zenon remote desktop server zenVncSrvCE.exe closes unexpectedly on a specific Windows CE device with ARM architecture when the http remote desktop access is used.
Summary On specific Windows CE devices with ARM architecture the zenon remote desktop configuration tool cannot be started and a remote desktop session via http results in the remote desktop server closing after only a few seconds DescriptionOn ...
System information collector lists files that do not exist
Summary The system information collector displays information for files that do not exist. DescriptionThe system information collector displays information for files that do not exist. Solution An issue has been addressed in the system information ...
System Information Collector lists attachments incorrectly
Summary The list of attached files in the System Information Collector has overlapping texts and is hard to read DescriptionThe list of attached files in the System Information Collector has overlapping texts and is hard to read Solution The list of ...
Changing to a tag value are not saved when the linked variable has a unit and the value is changed in the properties window dialog view.
Summary Changing the value of a numeric command tag that uses a unit (e.g. "kg"), is not saved when the value is changed in the dialog view of the properties window in the editor. Changing the value in the tag list detail view or in the list view of ...
Screen switch function for "lot archives" (archive revision, report generator, etc.) are not executed correctly on the Client
Summary Screen switch function for lot archives (archive revision, report generator, etc.) are not executed correctly on the Client. When displaying a filter dialog, there is a short delay, but lots that exist ni the server are not listed on the ...
The ALC.xml file does not contain the linked NodeID for ALC link elements when the link is used in another screen
Summary When an ALC "link" element is used in different screens, on one of the connected lines, the linked NodeID information is missing in the ALC.xml. DescriptionWhen an ALC "link" element is used in different screens, on one of the connected ...
Copy and paste of reactions in the editor from one phase to another results in an incorrect execution order
Summary When copying and pasting reactions from one phase to another, the executoin order is not correctly taken over from the source DescriptionWhen copying and pasting reactions from one phase to another, the executoin order is not correctly taken ...
The runtime closes unexpectedly when executing the function "print extended trend diagram"
Summary The runtime closes unexpectedly when executing the function "print extended trend diagram" is executed. DescriptionThe runtime closes unexpectedly when executing the function "print extended trend diagram" is executed. Solution An issue was ...
The MATSUTCP32 driver configuration cannot be opened in the editor
Summary The MATSUTCP32.EXE (Matsushita TCP-IP) driver configuration does not open in the zenon 7.10 32 and 64 bit editor. The driver cannot be configured DescriptionThe MATSUTCP32.EXE (Matsushita TCP-IP) driver configuration does not open in the ...
Variables from the STRATONNG driver receive status INVALID when performing an online change in the zenon logic
Summary When performing an online change on downloading a new zenon logic project to the zenon logic runtime, variables from the STRATONNG driver become INVALID. Variables from the STRATON32 driver remain spontaneous DescriptionWhen performing an ...
In the French zenon logic variable, the format selection of a profinet variable incorrectly displays the "64 bit integer" as "Entier signé 16 Bits"
Summary In the French zenon logic variable, the format selection of a profinet variable incorrectly displays the "64 bit integer" as "Entier signé 16 Bits" Description In the French zenon logic variable, the format selection of a profinet variable ...
Importing a specific Step7 project causes the editor to close unexpectedly
Summary With a specific Step7 project, the editor closes with an unhandled exception on importing the Step7 project. DescriptionWith a specific Step7 project, the editor closes with an unhandled exception on importing the Step7 project. Solution An ...
The editor closes unexpectedly when entering unicode (cyrillic) characters in the Equipment model
Summary The editor closes unexpectedly when entering unicode (cyrillic) characters in the Equipment model DescriptionThe editor closes unexpectedly when entering unicode (cyrillic) characters in the Equipment model Solution An issue has been ...
Equipment model filter in the Runtime do not support Unicode characters
Summary Equipment model filter in the Runtime do not support Unicode characters DescriptionEquipment model filter in the Runtime do not support Unicode characters Solution An issue has been addressed in the processing of Unicode characters for ...
The build setup hangs at "preparing system" under specific circumstances on specific system
Summary Under specific circumstances the 7.10 build setup may hang during the step "preparing system". Cancelling and restarting the build setup allows a normal installation of the build setup. DescriptionUnder specific circumstances the 7.10 build ...
The webclient does not start on a specific system after installation.
Summary On a specific system the zenadminsrv / zenlogsrv servies are not running after webclient (large) installation, which results in the webclient failing to start. DescriptionOn a specific system the zenadminsrv / zenlogsrv servies are not ...
The OPCUA Client driver subscribes to array elements inefficiently causing slow performance with many large arrays.
Summary The OPCUA client driver subscribes to single array elements which causes slow performance with an OPCUA server with a larger number of large arrays. (>150.000) The peformance of the OPC UA client driver should be improved in regard to ...
Drag & Drop of variables on interlockings does not work correctly
Summary Drag & Drop of variables on interlockings does not work correctly in the editor. Variables cannot be dropped. Description Drag & Drop of variables on interlockings does not work correctly in the editor. Variables cannot be dropped. Solution ...
Exchanging a driver may result in an intermediate driver configuration file causing configured connections to be lost
Summary When a driver is exchanged with a new driver, the driver configuration of the new driver is opened automatically. With some drivers that use TCP communication, the connections that are created in the driver configuration during the exchange ...
On remote transport, the system status does not clearly state the remote operating system
Summary After establishing a a remote transport connection from the editor, the output window shows information from the remote system, including the operating system. With a connection to e.g. a Windows 8 system, the version is shown as Windows 6.2, ...
The build setup closes without a message if it is executed on a system without zenon installed
Summary When executing the build setup on a system where no zenon is installed, the setup extracts but after successfull extraction the setup closes again without a message. Description When executing the build setup on a system where no zenon is ...
Runtime on client may close unexpectedly if a large amount of archive data is received with little free memory on the client system
Summary When a runtime client requests a larger amount of archive data, e.g. for displaying a trend with many variables for a long time period from a base archive, the runtime on the client can close unexpectedly if there is insufficient free memory ...
Screen elements with a negative height or width do not react correctly to resize or move in the editor
Summary When a screen element has a negative width or height, resizing the element in the editor does not work correctly. When the right anchor point is dragged, the element resizes on the opposite side. Also the frame in the editor is not displayed. ...
Not all executable files (Dll, exe) installed by the build setup are digitally signed.
Summary All executable files should be digitally signed with the current Ing. COPA-DATA Punzenberger GmbH software signing certificate to prove authenticity. The build setup may contain executable dll or exe files that are not digitally signed. ...
Files that are not overwritten by the build setup should be logged in the log file
Summary If a file in the ProgramData folder was changed by the user, the build setup does not overwrite the file. There is no information in the logfile that the file was not overwritten. DescriptionIf a file in the ProgramData folder was changed by ...
The build setup does not correctly update the zenonvstaproxyXXXX files the pipeline directory
Summary The build setup contains the zenonvstaproxyXXXX.dll files however does not correctly update the existing files on installation. DescriptionThe build setup contains the zenonvstaproxyXXXX.dll files however does not correctly update the ...
"Invalid project folder" error message is displayed on creating a zenon logic project for programmed simulation with certain drivers
Summary With certain drivers it is not possible to create a zenon logic project for the programmed driver simulation. An error message is displayed: "invalid project folder" This concerns the following drivers: 3S_32 3S_Arti 3S_Arti_NG 3S_V3 3964R32 ...
Next page