zensyssrv crashes during remote transport after rebuilding the connection

• Related Articles

• Checklist: Service Engine files cannot be transferred via Remote Transport

  Time estimate: 30 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...

• Remote Transport load / disconnect crashes Engineering Studio c_cdtoolsMultitasking()

  Description The <NAME_ENGINEERING_STUDIO> crashes when the Remote Transport is connected for a long time, and then a change load or remote transport disconnect is performed. This behavior has been fixed. To benefit from this fix: Upgrade to the ...

• Remote-Transport: no TCP keep alive for listening socket

  Description The TCP server of process zensysSrv (used for remote transport) did not send TCP keep alive messages to check if the TCP connection is still available. The issue has been addressed by automatically enabling TCP keep alive for the ...

• FAQ: How can you bypass the license query on a remote zenon Service Engine version 7.60 or lower when using a zenon Engineering Studio version 8.00 or higher?

  The remote transport verifies if there is license present on the remote machine. Since the license system changed with zenon 8.00 the remote system doesn't recognize the activated (8.00 or higher) license. To bypass the problem it is enough to insert ...

• On remote transport, the system status does not clearly state the remote operating system

  Summary After establishing a a remote transport connection from the editor, the output window shows information from the remote system, including the operating system. With a connection to e.g. a Windows 8 system, the version is shown as Windows 6.2, ...