zenon logic stops when loading a GSD file for Hilscher Profibus CIF driver

• Related Articles

• zenon Logic fieldbus driver => Hilscher cifX Profibusœ. It isn't possible to use more than one profibus slave.

  Summary The Hilscher cifX Profibus driver for zenon Logic cannot communicate with two different profibus slaves (e.g. From two different manufacturers) with one card. Description The Hilscher cifX Profibus driver for zenon Logic cannot communicate ...

• The fieldbus Hilscher CIF Profibus in zenon Logic does not start the communication with other slaves if one slave is not connected although the option 'Start despite disconnected slaves' is activated. The error message "Profibus initialization failed. Error starting IO communication." is shown.

  Summary When using the fieldbus Hilscher CIF Profibus in zenon Logic and one of the configured slaves is not connected, the communication will not start although the option 'Start despite disconnected slaves' is activated. The error message "Profibus ...

• zenon Logic Fieldbus => Hilscher cifX Profibus: Diagnose Variables (Master/Slave) are not updated properly

  Summary zenon Logic Fieldbus => Hilscher cifX Profibus: Diagnose Variables (Master/Slave) are not updated correctly. it isn't possible to check/recognize, if a slave is ok or not ok, because the SlaveState Bit is always 0! => e.g disconnect the ...

• zenon Logic fieldbus driver => Hilscher cifX Profibusœ doesn't work under Windows 7 Embedded Standard OS

  Summary The zenon Logic fieldbus driver => Hilscher cifX Profibusœ can not be used propperly under the operating system Windows 7 Embedded Standard. Description The zenon Logic fieldbus driver => Hilscher cifX Profibusœ can not be used propperly ...

• Checklist: The Logic Service to Service Engine connection does not work

  Time estimate:   30 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Screenshot and followed ...