zenon logic stops if mobus slave connects to modbus master over serial

• Related Articles

• zenon Logic MODBUS master sporadically looses connection to the slave device.

  Summary zenon Logic MODBUS master sporadically closes and reopens the TCP Port connection to the slave device. Descriptionzenon Logic MODBUS master sporadically closes and reopens the TCP Port connection to the slave device. Solution An issue has ...

• zenon Logic Fieldbus => Hilscher cifX Profibus: Diagnose Variables (Master/Slave) are not updated properly

  Summary zenon Logic Fieldbus => Hilscher cifX Profibus: Diagnose Variables (Master/Slave) are not updated correctly. it isn't possible to check/recognize, if a slave is ok or not ok, because the SlaveState Bit is always 0! => e.g disconnect the ...

• zenon logic workbench stops when exporting IEC 870-104 Master configuration

  Summary Zenon logic workbench stops when exporting IEC 870-104 Master configuration from fieldbus configuration. Description Zenon logic workbench stops when exporting IEC 870-104 Master configuration from fieldbus configuration. Solution improved ...

• Compatibility problem with Access IEC60870-5-104, can't load setting from XML

  Description After updating zenon Software Platform to a build that supports IPv6, IEC870 Master does not get a connection to IEC870 Slave in 101-Unbalanced mode.. This has been fixed. To benefit from this fix: Update your zenon Software Platform to ...

• Under specific circumstances the zenon Logic runtime stops unexpectedly.

  Summary The zenon Logic FTP function block causes the zenon Logic runtime to suddenly close when the ENABLE input is set to TRUE. Description The zenon Logic FTP function block causes the zenon Logic runtime to suddenly close when the ENABLE input is ...