zenon Logic redundancy: using IEC60870S fieldbus, Logic crashes after switching Logic redundancy

• Related Articles

• zenon Logic redundancy: using DNP3 fieldbus, Logic crashes after switching Logic redundancy

  Summary _. Description _. Issue Number: 240120 Fixed on Date: 29.4.2021 Versions: 8.20 0 BUILD 83630 | 8.10 0 BUILD 83099 | 10 0 BUILD 83962 | 8.00 0 BUILD 84785

• zenon logic: Unexpected complex data in expression

  In zenon version 8.20, it was possible to initiate and assign the function block in one line. This was not IEC compliant, therefore feature was removed in zenon 10. Now the error message "Unexpected complex data in expression" is logged when using ...

• Checklist: The Logic Service to Service Engine connection does not work

  Time estimate:   30 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Screenshot and followed ...

• zenon logic workbench stops when exporting IEC 870-104 Master configuration

  Summary Zenon logic workbench stops when exporting IEC 870-104 Master configuration from fieldbus configuration. Description Zenon logic workbench stops when exporting IEC 870-104 Master configuration from fieldbus configuration. Solution improved ...

• zenPG AccessIEC870Sl in 870-104 redundancy mode immediately closes one connection when redundant master opens second connection

  Summary The zenon Process Gateway AccessIEC870Sl does not support properly the IEC 60870-5-104 Edition 2.0 redundancy mode of Data Link correctly since the extension for IPv6 support. Description The zenon IEC60870-5-104 Process Gateway does not work ...