zenon Logic fieldbus driver => Hilscher cifX Profibusœ doesn't work under Windows 7 Embedded Standard OS

• Related Articles

• zenon Logic fieldbus driver => Hilscher cifX Profibusœ. It isn't possible to use more than one profibus slave.

  Summary The Hilscher cifX Profibus driver for zenon Logic cannot communicate with two different profibus slaves (e.g. From two different manufacturers) with one card. Description The Hilscher cifX Profibus driver for zenon Logic cannot communicate ...

• zenon Logic Fieldbus => Hilscher cifX Profibus: Diagnose Variables (Master/Slave) are not updated properly

  Summary zenon Logic Fieldbus => Hilscher cifX Profibus: Diagnose Variables (Master/Slave) are not updated correctly. it isn't possible to check/recognize, if a slave is ok or not ok, because the SlaveState Bit is always 0! => e.g disconnect the ...

• Checklist: The Logic Service to Service Engine connection does not work

  Time estimate:   30 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Screenshot and followed ...

• The Profinet Controller driver for zenon logic does not start on Windows Embedded Compact 7 (Windows CE 7)

  Summary The zenon logic runtime on Windows Embedded Compact 7 (CE7) fails to start the Profinet Controller driver Description The zenon logic runtime on Windows Embedded Compact 7 (CE7) fails to start the Profinet Controller driver Solution An issue ...

• zenon Logic: Weihenstephan Standard Client driver not available any more

  Summary Added missing entries. Description Added missing entries. Information With zenon 8.0 there was a change made to use the file "%cd_programdata8000%\straton\IODList_EN.xml" (or IODList_DE.xml, depending on the language of the Logic Editor), in ...