WVS: Specific settings "transparent" not considered for flashing combielement text

WVS: Specific settings "transparent" not considered for flashing combielement text

Description

The combined element appeared incorrect in WVS when flashing and transparent were both enabled because the transparent setting was ignored, causing the background to flash between the configured color and black.

The issue has been addressed and the behavior is now as expected. 

 

To benefit from this fix:

  • Update your zenon Software Platform to the latest build of zenon 15 or higher.


Item ID: 307162
Version: 15.00 Build: 621381

    • Related Articles

    • FAQ: WVS and Ops Manager in combination with zenon network redundancy

      It is possible to start the Web Visualization Service Ops Manager on the respective servers and it is also possible to start the Ops Manager on specific PCs. The most distributed architecture can be seen in the following picture: Possible network ...

    • Checklist: WVS does not work

      Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Perform a build update to the latest version. In the ...

    • SE(WVS) Crash w/ specific project

      Description In very rare cases, the Service Engine in WVS version 11 crashes if no masking character is configured on a dynamic text with hidden input. This behavior has been fixed. To benefit from this fix: Update your zenon Software Platform to the ...

    • WVS supports basic Command Processing

      Summary WVS supports Command Processing. Description The screen of type Command Processing can be called up in the Web Visualization Service. The following are supported: Write set value via the following screen elements: Dynamic text Numeric value ...

    • Using AddIn in combination with WVS

      Can AddIns be used in WVS? Simple answer: yes, but... Types of AddIns, Types of WVS There need to be distinguished between a AddIn Service and an AddIn Wizard. Whereas the first is started and stopped and reacts in between on events is the latter ...