Wizard IEC61850 driver configuration incorrectly configures report (RCB)

• Related Articles

• IEC850 Driver Configuration wizard: Variable cannot be imported if it is from a different LD of the RCB/DS

  Summary IEC850 Driver Configuration wizard: Variable cannot be imported if it is from a different LD of the RCB/DS Description IEC850 Driver Configuration wizard: Variable cannot be imported if it is from a different LD of the RCB/DS Information ...

• When IEC850 driver is configured to "Use Report-ID for RCB assignment" then it uses the globally configured TrgOps instead of the TrgOps per RCB

  Summary Issue when the option "Use Report-ID for RCB assignment" in IEC61850 Client driver is active: then to enable a RCB the driver uses the globally configured options (e.g. TrgOps) and not the options configured for this particular RCB. Affected ...

• IEC 61850 Client driver in Logic should have configuration settings BufTm, IntgPd, OptFlds like zenon iec850 driver has

  Summary zenon version 7.20 has introduced in zenon IEC61850 (client) driver new configuration settings, but not in the Client driver in straton/Logic. The driver configuration RCB settings: Buffer Time, Integrity Period and Optional Fields should be ...

• When in Data Model of 850-Server the BRCB.rptID is empty then the IEC850 driver is not able to "Use Report-ID for RCB assignment" and is not storing EntryID to acquire buffered events after reconnect.

  Summary According the IEC61850 Standard when RptID is empty then it means that it in Reports it will be the ObjectReference to RCB, e.g. "IEDNameLDInst/LLN0$BR$brcbST01". At the communication start or online browsing of available RCBs the IEC61850 ...

• Checklist: zenon Driver does not start in zenon 11 Engineering Studio / Service Engine.

  Time estimate: 15 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. In zenon 11 and newer versions, ...